Commit graph

32 commits

Author SHA1 Message Date
David S. Miller
4f0234f4f9 [SPARC64]: Initial LDOM cpu hotplug support.
Only adding cpus is supports at the moment, removal
will come next.

When new cpus are configured, the machine description is
updated.  When we get the configure request we pass in a
cpu mask of to-be-added cpus to the mdesc CPU node parser
so it only fetches information for those cpus.  That code
also proceeds to update the SMT/multi-core scheduling bitmaps.

cpu_up() does all the work and we return the status back
over the DS channel.

CPUs via dr-cpu need to be booted straight out of the
hypervisor, and this requires:

1) A new trampoline mechanism.  CPUs are booted straight
   out of the hypervisor with MMU disabled and running in
   physical addresses with no mappings installed in the TLB.

   The new hvtramp.S code sets up the critical cpu state,
   installs the locked TLB mappings for the kernel, and
   turns the MMU on.  It then proceeds to follow the logic
   of the existing trampoline.S SMP cpu bringup code.

2) All calls into OBP have to be disallowed when domaining
   is enabled.  Since cpus boot straight into the kernel from
   the hypervisor, OBP has no state about that cpu and therefore
   cannot handle being invoked on that cpu.

   Luckily it's only a handful of interfaces which can be called
   after the OBP device tree is obtained.  For example, rebooting,
   halting, powering-off, and setting options node variables.

CPU removal support will require some infrastructure changes
here.  Namely we'll have to process the requests via a true
kernel thread instead of in a workqueue.  workqueues run on
a per-cpu thread, but when unconfiguring we might need to
force the thread to execute on another cpu if the current cpu
is the one being removed.  Removal of a cpu also causes the kernel
to destroy that cpu's workqueue running thread.

Another issue on removal is that we may have interrupts still
pointing to the cpu-to-be-removed.  So new code will be needed
to walk the active INO list and retarget those cpus as-needed.

Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-16 04:04:40 -07:00
David S. Miller
ec4d18f219 [SPARC64]: Fix SBUS IRQ regression caused by PCI-E driver.
We used to access the 64-bit IRQ IMAP and ICLR registers of bus
controllers 4-bytes in and as a 32-bit register word, since only the
low 32-bits were relevant.  This seemed like a good idea at the time.

But the PCI-E controller requires full 8-byte 64-bit access to
these registers, so we switched over to accessing them fully.

SBUS was not adjusted properly, which broke interrupts completely.

Signed-off-by: David S. Miller <davem@davemloft.net>
2007-06-07 16:59:51 -07:00
David S. Miller
a2f9f6bbb3 [SPARC64]: Fix {mc,smt}_capable().
It's not just sun4v hypervisor platforms that should return true
for this, sun4u with UltraSPARC-IV should return true too.

Signed-off-by: David S. Miller <davem@davemloft.net>
2007-06-04 21:50:05 -07:00
David S. Miller
5cd342df96 [SPARC64]: Make core and sibling groups equal on UltraSPARC-IV.
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-06-04 21:50:02 -07:00
David S. Miller
f78eae2e6f [SPARC64]: Proper multi-core scheduling support.
The scheduling domain hierarchy is:

   all cpus -->
      cpus that share an instruction cache -->
          cpus that share an integer execution unit

Signed-off-by: David S. Miller <davem@davemloft.net>
2007-06-04 21:50:00 -07:00
David S. Miller
5cbc307373 [SPARC64]: Use machine description and OBP properly for cpu probing.
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-05-29 02:49:41 -07:00
Simon Arlott
e5dd42e4fb [SPARC64]: Spelling fixes.
Spelling fixes in arch/sparc64/.

Signed-off-by: Simon Arlott <simon@fire.lp0.eu>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-05-11 21:39:21 -07:00
David S. Miller
aa5242e78f [SPARC64]: Fix recursion in PROM tree building.
Use iteration for scanning of PROM node siblings.

Based upon a patch by Greg Onufer, who found this bug.

Signed-off-by: David S. Miller <davem@davemloft.net>
2007-05-10 00:53:29 -07:00
David S. Miller
c35a376d60 [SPARC64]: Fix section mismatch warnings in arch/sparc64/kernel/prom.c
The IRQ translation init routines should all be __init.

Signed-off-by: David S. Miller <davem@davemloft.net>
2007-05-07 00:02:24 -07:00
David S. Miller
861fe90656 [SPARC64]: SUN4U PCI-E controller support.
Some minor refactoring in the generic code was necessary for
this:

1) This controller requires 8-byte access to the interrupt map
   and clear register.  They are 64-bits on all the other
   SBUS and PCI controllers anyways, so this was easy to cure.

2) The IMAP register has a different layout and some bits that we
   need to preserve, so use a read/modify/write when making
   changes to the IMAP register in generic code.

3) Flushing the entire IOMMU TLB is best done with a single write
   to a register on this PCI controller, add a iommu->iommu_flushinv
   for this.

Still lacks MSI support, that will come later.

Signed-off-by: David S. Miller <davem@davemloft.net>
2007-05-06 22:44:06 -07:00
Stephen Rothwell
3dfe10ee7c [SPARC64]: constify some paramaters of OF routines
This starts bringing the PowerPC and Sparc64 implemetations back closer
together.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-26 01:55:40 -07:00
David S. Miller
a8b8814bdf [SPARC]: Use strcasecmp for OFW property name comparisons.
This allows us to simplify sharing code with powerpc which
has properties that have various forms of capitalization
when on the sparc64 side the property is all lower-case.

Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-26 01:54:41 -07:00
Stephen Rothwell
64b94701c0 [SPARC/64]: constify of_get_property return
Finally, we actually change the functions themselves.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-26 01:54:35 -07:00
Stephen Rothwell
6a23acf390 [SPARC64]: constify of_get_property return: arch/sparc64
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-26 01:54:24 -07:00
David S. Miller
9001f2850f [SPARC64]: Fix Tomatillo/Schizo IRQ handling.
The code in schizo_irq_trans_init() should set irq_data->sync_reg
to the location of the SYNC register if this is Tomatillo, and set
it to zero otherwise.  But that is not what it is doing.

As a result, non-Tomatillo systems were trying to access a
non-existent register resulting in bus errors at the first
PCI interrupt.

Thanks to Roland Stigge for the bug report.

Signed-off-by: David S. Miller <davem@davemloft.net>
2006-10-30 19:33:33 -08:00
David S. Miller
4130a4b206 [SPARC64]: Fix central/FHC bus handling on Ex000 systems.
1) probe_other_fhcs() wants to see only non-central FHC
   busses, so skip FHCs that don't sit off the root

2) Like SBUS, FHC can lack the appropriate address and
   size cell count properties, so add an of_busses[]
   entry and handlers for that.

3) Central FHC irq translator probing was buggy.  We
   were trying to use dp->child in irq_trans_init but
   that linkage is not setup at this point.

   So instead, pass in the parent of "dp" and look for
   the child "fhc" with parent "central".

Thanks to the tireless assistence of Ben Collins in tracking
down these problems and testing out these fixes.

Signed-off-by: David S. Miller <davem@davemloft.net>
2006-10-25 22:39:15 -07:00
Dave Jones
038b0a6d8d Remove all inclusions of <linux/config.h>
kbuild explicitly includes this at build time.

Signed-off-by: Dave Jones <davej@redhat.com>
2006-10-04 03:38:54 -04:00
David S. Miller
46ba6d7d8b [SPARC64]: Fix more of_device layer IRQ bugs, and correct PROMREG_MAX.
Sabre and Psycho PCI controllers can have partial interrupt-map
properties, meaning that on-board devices don't match up to any
entries.  Instead, they are fully specified from the beginning and
we should pass them directly to the IRQ translator as-is.

Also, fill in the necessary translator slots for the "graphics"
and "expansion UPA" interrupts on Sabre, Psycho, and SYSIO SBUS.

Increase PROMREG_MAX to 24, as seen on SUNW,ffb devices.

Finally, prevent accidentally writing past the end of the of_device
struct resource[] and irqs[] arrays.  Spit out a log message when
we ignore some entries because there are too many of them.

Signed-off-by: David S. Miller <davem@davemloft.net>
2006-07-21 14:17:52 -07:00
David S. Miller
9bbd952e7f [SPARC64]: Refine Sabre wsync logic.
It is only needed when there is a PCI-PCI bridge sitting
between the device and the PCI host controller which is
not a Simba APB bridge.

Add logic to handle two special cases:

1) device behind EBUS, which sits on PCI
2) PCI controller interrupts

Signed-off-by: David S. Miller <davem@davemloft.net>
2006-07-13 01:50:13 -07:00
David S. Miller
a23c3a86e9 [SPARC64]: Fix 2 bugs in sabre_irq_build()
When installing the IRQ pre-handler, we were not setting up the second
argument correctly.  It should be a pointer to the sabre_irq_data, not
the config space PIO address.

Furthermore, we only need this pre-handler installed if the device
sits behind a PCI bridge that is not Sabre or Simba/APB.

Signed-off-by: David S. Miller <davem@davemloft.net>
2006-07-13 01:50:08 -07:00
Randy Dunlap
7233589d77 [SPARC64]: Fix sparc64 build errors when CONFIG_PCI=n.
Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-07-05 20:18:39 -07:00
David S. Miller
6e990b50ed [SPARC64]: Kill sun4v virtual device layer.
Replace with a simple IRQ translater in the PROM
device tree builder.

Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-30 14:13:41 -07:00
David S. Miller
2b1e597871 [SPARC64]: of_device layer IRQ resolution
Do IRQ determination generically by parsing the PROM properties,
and using IRQ controller drivers for final resolution.

One immediate positive effect is that all of the IRQ frobbing
in the EBUS, ISA, and PCI controller layers has been eliminated.
We just look up the of_device and use the properly computed
value.

The PCI controller irq_build() routines are gone and no longer
used.  Unfortunately sbus_build_irq() has to remain as there is
a direct reference to this in the sunzilog driver.  That can be
killed off once the sparc32 side of this is written and the
sunzilog driver is transformed into an "of" bus driver.

Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-29 16:37:38 -07:00
David S. Miller
3ae9a3489a [SPARC]: Add of_n_{addr,size}_cells().
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-29 16:37:10 -07:00
David S. Miller
87b385da1f [SPARC]: Add unique device_node IDs and a ".node" property.
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-25 23:18:57 -07:00
David S. Miller
fb7cd9d9ac [SPARC]: Add of_set_property() interface.
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-25 23:18:36 -07:00
David S. Miller
8cd24ed4f8 [SPARC64]: Expand of_*() interfaces some more.
Import some more stuff from powerpc.

Add of_device_is_compatible(), and of_find_compatible_node().
Export some more of the other routines to modules.

Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-23 23:15:41 -07:00
David S. Miller
690c8fd31f [SPARC64]: Use in-kernel PROM tree for EBUS and ISA.
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-23 23:15:28 -07:00
David S. Miller
de8d28b16f [SPARC64]: Convert sparc64 PCI layer to in-kernel device tree.
One thing this change pointed out was that we really should
pull the "get 'local-mac-address' property" logic into a helper
function all the network drivers can call.

Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-23 23:15:26 -07:00
David S. Miller
6d307724cb [SPARC64]: Add of_getintprop_default().
This encodes a common idiomatic coding pattern used when
dealing with integer properties.

Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-23 23:15:15 -07:00
David S. Miller
aaf7cec276 [SPARC64]: Add of_find_node_by_{name,type}().
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-23 23:15:04 -07:00
David S. Miller
372b07bb5a [SPARC64]: Import OBP device tree into kernel data structures.
The basic framework is based on the PowerPC OF code.

This code even tries to get the device addressing components
correct in the full path names.

Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-23 23:15:02 -07:00