Commit graph

11 commits

Author SHA1 Message Date
Bartlomiej Zolnierkiewicz
657cc1a8f6 ide: set IDE_TFLAG_IN_* flags before queuing/executing command
* Add IDE_TFLAG_{HOB,TF,DEVICE} defines.

* Set IDE_TFLAG_IN_* flags in {do_rw,ide_no_data,ide_raw}_taskfile() users.

* Remove no longer needed ->tf_flags setup from ide_end_drive_cmd().

There should be no functionality changes caused by this patch.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-26 20:13:10 +01:00
Bartlomiej Zolnierkiewicz
a3bbb9d882 ide: remove unnecessary writes to HOB taskfile registers
* Set taskfile flags for REQ_TYPE_ATA_TASKFILE requests before
  adding the request to the queue.

* Cleanup execute_drive_cmd().

* Remove unnecessary writes to HOB taskfile registers when using
  LBA48 disk for the following cases:

  - Power Management requests
    (WIN_FLUSH_CACHE[_EXT], WIN_STANDBYNOW1, WIN_IDLEIMMEDIATE commands)

  - special commands (WIN_SPECIFY, WIN_RESTORE, WIN_SETMULT)

  - Host Protected Area support (WIN_READ_NATIVE_MAX, WIN_SET_MAX)

  - /proc/ide/ SMART support (WIN_SMART with SMART_ENABLE,
    SMART_READ_VALUES and SMART_READ_THRESHOLDS subcommands)

  - write cache enabling/disabling in ide-disk
    (WIN_SETFEATURES with SETFEATURES_{EN,DIS}_WCACHE)

  - write cache flushing in ide-disk (WIN_FLUSH_CACHE[_EXT])

  - acoustic management in ide-disk
    (WIN_SETFEATURES with SETFEATURES_{EN,DIS}_AAM)

  - door (un)locking in ide-disk (WIN_DOORLOCK, WIN_DOORUNLOCK)

  - /proc/ide/hd?/identify support (WIN_IDENTIFY)

  - ACPI _GTF taskfiles

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-25 22:17:10 +01:00
Bartlomiej Zolnierkiewicz
9a3c49be5c ide: add ide_no_data_taskfile() helper
* Add ide_no_data_taskfile() helper and convert ide_raw_taskfile() w/ NO DATA
  protocol users to use it instead.

* Set ->data_phase explicitly in ide_no_data_taskfile()
  (TASKFILE_NO_DATA is defined as 0x0000).

* Unexport task_no_data_intr().

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-25 22:17:07 +01:00
Bartlomiej Zolnierkiewicz
650d841d9e ide: add struct ide_taskfile (take 2)
* Don't set write-only ide_task_t.hobRegister[6] and ide_task_t.hobRegister[7]
  in idedisk_set_max_address_ext().

* Add struct ide_taskfile and use it in ide_task_t instead of tfRegister[]
  and hobRegister[].

* Remove no longer needed IDE_CONTROL_OFFSET_HOB define.

* Add #ifndef/#endif __KERNEL__ around definitions of {task,hob}_struct_t.

While at it:

* Use ATA_LBA define for LBA bit (0x40) as suggested by Tejun Heo.

v2:
* Add missing newlines. (Noticed by Sergei)

* Use ~ATA_LBA instead of 0xBF. (Noticed by Sergei)

* Use unnamed unions for error/feature and status/command.
  (Suggested by Sergei).

There should be no functionality changes caused by this patch.

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: Tejun Heo <htejun@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-25 22:17:06 +01:00
Jeff Garzik
7c48c56e9b IDE: terminate ACPI DMI list
Fix oops reported by Trond.

Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-01-11 11:42:07 -08:00
Shaohua Li
90494893b5 ide: workaround suspend bug for ACPI IDE
http://bugzilla.kernel.org/show_bug.cgi?id=9673

ACPI _PS3 cause S4 breaks in the second attempt. The system has a _PS3
method for IDE, which will call into SMM mode. Currently we haven't clue
why just the second attempt fails, as it's totally in BIOS code, so
blacklist the system so far for 2.6.24.

A possible suspect is ACPI NVS isn't save/restore, we will revisit the
bug after linux does ACPI NVS save/restore.

Bart:
- fix scripts/checkpatch.pl complaints
- const-ify ide_acpi_dmi_table[]

Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Reported-by: Mikko Vinni <mmvinni@yahoo.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-10 23:03:42 +01:00
Bartlomiej Zolnierkiewicz
892470b26c ide: fix ->data_phase in taskfile_load_raw()
It should be TASKFILE_NO_DATA, not TASKFILE_IN.  Luckily ATM ->data_phase is
unused if ->command_type == IDE_DRIVE_TASK_NO_DATA but this may change in the
future.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-20 00:32:37 +02:00
Adrian Bunk
39e5f590b6 ide: unexport ide_acpi_set_state
This patch removes the unused EXPORT_SYMBOL_GPL(ide_acpi_set_state)

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Cc: Shaohua Li <shaohua.li@intel.com>
Cc: Len Brown <lenb@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-13 17:47:48 +02:00
Shaohua Li
5e32132bef ide: hook ACPI _PSx method to IDE power on/off
ACPI spec defines the sequence of IDE power on/off:
Powering down:
	Call _GTM.
	Power down drive (calls _PS3 method and turns off power planes).
Powering up:
	Power up drive (calls _PS0 method if present and turns on power planes).
	Call _STM passing info from _GTM (possibly modified), with ID data from
	each drive.
	Initialize the channel.
	May modify the results of _GTF.
	For each drive:
		Call _GTF.
		Execute task file (possibly modified).
This patch adds the missed _PS0/_PS3 methods call.

Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Acked-by: Len Brown <len.brown@intel.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-11 23:53:58 +02:00
Andrew Morton
1e8f34f7d8 ide-acpi support warning fix
drivers/ide/ide-acpi.c: In function 'ide_acpi_get_timing':
drivers/ide/ide-acpi.c:537: warning: format '%x' expects type 'unsigned int', but argument 4 has type 'long unsigned int'

Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-02-07 18:19:42 +01:00
Hannes Reinecke
e3a59b4d93 ACPI support for IDE devices
This patch implements ACPI integration for generic IDE devices.
The ACPI spec mandates that some methods are called during suspend and
resume. And consequently there most modern Laptops cannot resume
properly without it.

According to the spec, we should call '_GTM' (Get Timing) upon suspend
to store the current IDE adapter settings.
Upon resume we should call '_STM' (Set Timing) to initialize the
adapter with the stored settings; afterwards '_GTF' (Get Taskfile)
should be called which returns a buffer with some IDE initialisation
commands. Those commands should be passed to the drive.

There are two module params which control the behaviour of this patch:

'ide=noacpi'
	Do not call any ACPI methods (Disables any ACPI method calls)
'ide=acpigtf'
	Enable execution of _GTF methods upon resume.
	Has no effect if 'ide=noacpi' is set.
'ide=acpionboot'
	Enable execution of ACPI methods during boot.
	This might be required on some machines if 'ide=acpigtf' is
	selected as some machines modify the _GTF information
	depending on the drive identification passed down with _STM.

Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-02-07 18:19:37 +01:00