Commit graph

24 commits

Author SHA1 Message Date
James.Smart@Emulex.Com
9909b79e3d [SCSI] lpfc driver 8.0.30 : update version to 8.0.30
Signed-off-by: James Smart <James.Smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-08-12 12:09:32 -05:00
James.Smart@Emulex.Com
918865230e [SCSI] lpfc driver 8.0.30 : convert to use of int_to_scsilun()
Replace use of lpfc_put_lun with midlayer's int_to_scsilun

Remove driver's local definition of lpfc_put_lun (which converts an
int back to a 64-bit LUN) and replace it's use with the recently added
int_to_scsilun function provided by the midlayer.

Note: Embedding midlayer structure in our structure caused
need for more files to include midlayer headers.

Signed-off-by: James Smart <James.Smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-08-12 12:09:01 -05:00
James.Smart@Emulex.Com
ea84c3f74d [SCSI] lpfc driver 8.0.30 : dev_loss and nodev timeouts
Fix handling of the dev_loss and nodev timeouts.

Symptoms: when remote port disappears for a period of time longer then
either nodev_tmo or dev_loss_tmo, the lpfc driver worker thread will
stall removing that remote port.

Cause: removing remote port involves un-blocking and sync-ing
corresponding block device queue. But corresponding node in the lpfc
driver is still in the NPR(?node port recovery?) state and mid-layer
gets SCSI_MLQUEUE_HOST_BUSY as a return value when it is trying to call
queuecommand() with command for that node (AKA remote port)

Fix: Instead of returning SCSI_MLQUEUE_HOST_BUS from queuecommand() for
nodes in NPR states complete it with retry-able error code  DID_BUS_BUSY

Signed-off-by: James Smart <James.Smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-08-12 12:08:54 -05:00
James.Smart@Emulex.Com
f888ba3ce7 [SCSI] lpfc driver 8.0.30 : fix get_stats panic
Fix panic in lpfc_get_stats()

Symptoms: Panic on sysfs stats access

Cause: In lpfc_get_stats() we are writing to memory that we do not
own.

Fix: Fix our stats structure allocation. Embed phba->link_stats in
struct lpfc_hba and stop treating it like rogue structure.

Note: Embedding midlayer/transport structure in our structure caused
need for more files to include midlayer/transport headers.

Signed-off-by: James Smart <James.Smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-08-12 12:08:48 -05:00
James.Smart@Emulex.Com
69859dc477 [SCSI] lpfc driver 8.0.30 : task mgmt bit clearing
Clear task management bits when preparing SCSI commands

In lpfc_scsi_prep_cmnd, clear the task management bits (fcpCntl2 member
in the fcp_cmd structure) when preparing regular SCSI commands.

Signed-off-by: James Smart <James.Smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-08-12 12:08:40 -05:00
James.Smart@Emulex.Com
8cbdc5fffa [SCSI] lpfc driver 8.0.30 : fix lip/cablepull panic
Fix panic on lip and cable pull

Symptoms: Panic on lip or cable pull

Cause: Use after free of nlp in lpfc_nlp_remove()

Fix: Do not make FC transport calls after a node is removed. Transport
calls are disabled by ignoring the initial delete transition.

Signed-off-by: James Smart <James.Smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-08-12 12:08:30 -05:00
James.Smart@Emulex.Com
483f05f013 [SCSI] lpfc driver 8.0.30 : fix iocb reuse initialization
IOCB BDE not getting fully initialized during reuse

Symptoms: Driver gets Status 3 and Reason 0x13 on IOCB completions.

Cause: The IOCB bpl.bdeSize and bdeFlags are not getting initialized on reuse.

Fix: Reinitialize these fields in prep_dma each time an IOCB is used.

Signed-off-by: James Smart <James.Smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-08-12 12:08:13 -05:00
Olaf Hering
44456d37b5 [PATCH] turn many #if $undefined_string into #ifdef $undefined_string
turn many #if $undefined_string into #ifdef $undefined_string to fix some
warnings after -Wno-def was added to global CFLAGS

Signed-off-by: Olaf Hering <olh@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-27 16:26:08 -07:00
James.Smart@Emulex.Com
eda912e34a [SCSI] lpfc: Change version to 8.0.29.
Signed-off-by: James Smart <James.Smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-07-02 19:08:56 -05:00
James.Smart@Emulex.Com
c44ce17374 [SCSI] lpfc: Update copyright notices
Update copyright notice text and include year 2005.

Add Copyright notice for Christoph Hellwig to several files: lpfc.h
lpfc_attr.c lpfc_els.c lpfc_hbadisc.c lpfc_init.c lpfc_mbox.c
lpfc_mem.c lpfc_nportdisc.c lpfc_scsi.c lpfc_sli.c

Signed-off-by: James Smart <James.Smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-07-02 19:08:29 -05:00
James.Smart@Emulex.Com
5542134f61 [SCSI] lpfc: Remove $Id$ keyword strings.
Signed-off-by: James Smart <James.Smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-07-02 19:06:16 -05:00
James.Smart@Emulex.Com
2501322eee [SCSI] lpfc: Fix ADISC completion incorrectly putting initiators on mapped list
Symptom - An unmapped node (initiator) that goes away in a situation
such as cable pull, comes back as a mapped node.  Fix - On ADISC
completion, put a list on the mapped list only if it is a FCP_TARGET.

Signed-off-by: James Smart <James.Smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-07-02 18:58:48 -05:00
James.Smart@Emulex.Com
5eb95af086 [SCSI] lpfc: Add completion handler to the abort iocbs
Add completion handler to the abort iocbs to close a hole where we
could reuse an iotag.

Signed-off-by: James Smart <James.Smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-07-02 18:57:22 -05:00
James.Smart@Emulex.Com
1f679cafd2 [SCSI] lpfc: Fix LS_RJT never sent by lpfc_els_unsol_event()
lpfc_els_unsol_event() checks rjt_err to determine is LS_RJT should be
sent.  However, rjt_err was set to LSEXP_NOTHING_ELSE (which is 0) in
cases where an LS_RJT should be sent, so rjt_err was never true.
Change lpfc_els_unsol_event() to set rjt_err to 1 when LS_RJT should
be sent.

Signed-off-by: James Smart <James.Smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-07-02 18:55:23 -05:00
James.Smart@Emulex.Com
06325e7459 [SCSI] lpfc: Add LP6000 PCI ID
Fix driver not seeing LP6000.  Fix: add PCI id to the pci_device_id
table and a short description for the HBA in get_hba_model_desc().
Also add a default clause to the switch statement that parses the
various PCI ID's.

Signed-off-by: James Smart <James.Smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-07-02 17:18:52 -05:00
James.Smart@Emulex.Com
564b296083 [SCSI] lpfc: Set max_sectors in host template
Add max_sectors to the driver host template and initialize it with
0xFFFF since the driver has no limitations on the size a transfer
contained by a scsi command and that fits within the sg_tablesize
provisioned by the driver.  This fixes a performance issue seen in
some configurations.

Signed-off-by: James Smart <James.Smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-07-02 17:07:57 -05:00
James.Smart@Emulex.Com
87f6eaffd7 [SCSI] lpfc: Fix error loading on sparc
Bug reported via SourceForge - lpfc does not load on sparc.  The lpfc
driver must byteswap all FCP IOCBs to recover the data into cpu native
format.

Also correct issue of "iotag not found" messages

Signed-off-by: James Smart <James.Smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-07-02 17:07:03 -05:00
James.Smart@Emulex.Com
db468d108a [SCSI] lpfc: Fixes in mbox_timeout_handler
Analysis:

Timeout of READ_SPARM64 causes call to lpfc_mbox_timeout_handler which
reads psli->mbox_active to determine the timeout mbox.  Timeout
handler then NULL's psli->mbox_active and calls
lpfc_mbx_cmpl_read_sparam(), which on timeout condition, calls
link_down().  link_down() now calls disc_done() which calls
mbox_timeout_hander() again since WORKER_MBOX_TMO is still set, which
goes back to read psli->mbox_active which is already NULL'ed.

Remove redundant if statement in lpfc_mbox_timeout_handler.  pmbox is
assigned psli->mbox_active so there is no need to check if it actually
equals psli->mbox_active.

Signed-off-by: James Smart <James.Smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-07-02 17:05:32 -05:00
James.Smart@Emulex.Com
6e8215e488 [SCSI] Fix issue where all hosts log nodev message for other initiators
Fix issue where all hosts connected to SAN get spammed with nodev
message when other initiators go away.  Display nodev message only
when FC targets go away.  However this behavior will be overridden if
LOG_DISCOVERY is set.

Signed-off-by: James Smart <James.Smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-07-02 17:04:06 -05:00
James.Smart@Emulex.Com
4cc2da1d84 [SCSI] lpfc: hgp/pgp cleanups
From: Christoph Hellwig <hch@lst.de>:

 - rename PGP/HPH to lpfc_pgp/lpfc_hgp
 - use __le32 types for the members to start fixing sparse -Wbitwise
   issues
 - remove lpfc_sli.MBhostaddr, we can always use the pointer from
   SLI2_DESC directly

Signed-off-by: James Smart <James.Smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-07-02 16:58:16 -05:00
Jeff Garzik
68b3aa7c98 [SCSI] allow sleeping in ->eh_bus_reset_handler()
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-06-17 12:05:10 -05:00
Jeff Garzik
94d0e7b805 [SCSI] allow sleeping in ->eh_device_reset_handler()
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-06-17 12:05:03 -05:00
Jeff Garzik
8fa728a268 [SCSI] allow sleeping in ->eh_abort_handler()
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-06-17 12:04:55 -05:00
dea3101e0a lpfc: add Emulex FC driver version 8.0.28
From: 	James.Smart@Emulex.Com

Modified for kernel import and
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-04-18 13:50:53 -05:00