Commit graph

35 commits

Author SHA1 Message Date
Bjorn Helgaas
a0bd4ac498 ACPI: Remove duplicate definitions for _STA bits
No need to duplicate the existing definitions in include/acpi/actypes.h.

syntax only -- no functional change.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Len Brown <len.brown@intel.com>
2007-04-25 14:17:39 -04:00
Len Brown
7cda93e008 ACPI: delete extra #defines in /drivers/acpi/ drivers
Cosmetic only.

Except in a single case, #define ACPI_*_DRIVER_NAME
were invoked 0 or 1 times.

Signed-off-by: Len Brown <len.brown@intel.com>
2007-02-12 23:50:52 -05:00
Len Brown
c2b6705b75 ACPI: fix acpi_driver.name usage
It was erroneously used as a description rather than a name.

ie. turn this:

lenb@se7525gp2:/sys> ls bus/acpi/drivers
ACPI AC Adapter Driver  ACPI Embedded Controller Driver  ACPI Power Resource Driver
ACPI Battery Driver     ACPI Fan Driver                  ACPI Processor Driver
ACPI Button Driver      ACPI PCI Interrupt Link Driver   ACPI Thermal Zone Driver
ACPI container driver   ACPI PCI Root Bridge Driver      hpet

into this:

lenb@se7525gp2:~> ls /sys/bus/acpi/drivers
ac  battery  button  container  ec  fan  hpet  pci_link  pci_root  power  processor  thermal

Signed-off-by: Len Brown <len.brown@intel.com>
2007-02-12 23:33:40 -05:00
Len Brown
f52fd66d2e ACPI: clean up ACPI_MODULE_NAME() use
cosmetic only

Make "module name" actually match the file name.
Invoke with ';' as leaving it off confuses Lindent and gcc doesn't care.
Fix indentation where Lindent did get confused.

Signed-off-by: Len Brown <len.brown@intel.com>
2007-02-12 22:42:12 -05:00
Burman Yan
36bcbec7ce ACPI: replace kmalloc+memset with kzalloc
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Len Brown <len.brown@intel.com>
2006-12-20 16:54:54 -05:00
Len Brown
cece901481 Pull style into test branch
Conflicts:

	drivers/acpi/button.c
	drivers/acpi/ec.c
	drivers/acpi/osl.c
	drivers/acpi/sbs.c
2006-12-16 01:04:27 -05:00
Yasunori Goto
887b95931b [PATCH] acpi memory hotplug: remove strange add_memory fail message
I wrote a patch to avoid redundant memory hot-add call at boot time.  This
was cause of strange fail message of memory hotplug like "ACPI: add_memory
failed".  Memory is recognized by early boot code with EFI/E820.

But, if DSDT describes memory devices for them, then hot-add code is called
for already recognized memory, and it shows fail messages with -EEXIST.
So, sys admin will misunderstand this message as something wrong by it.

This patch avoids them by preventing redundant hot-add call until
completion of driver initialization.

[akpm@osdl.org: cleanups]
Signed-off-by: Yasunori Goto <y-goto@jp.fujitsu.com>
Cc: "Brown, Len" <len.brown@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-20 10:26:38 -07:00
Yasunori Goto
6cbe44cd8d [PATCH] Change log level of a message of acpi_memhotplug to KERN_DEBUG
I suppose this message seems quite useless except debugging.  It just shows
"Hotplug Mem Device".  System admin can't know anything by this message.
So, I would like to change it to KERN_DEBUG.

Signed-off-by: Yasunori Goto <y-goto@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-20 10:26:37 -07:00
Jan Engelhardt
50dd096973 ACPI: Remove unnecessary from/to-void* and to-void casts in drivers/acpi
Signed-off-by: Jan Engelhardt <jengelh@gmx.de>
Signed-off-by: Len Brown <len.brown@intel.com>
2006-10-14 01:51:07 -04:00
Keith Mannthey
8c2676a587 [PATCH] hot-add-mem x86_64: memory_add_physaddr_to_nid node fixup
In cases where the acpi memory-add event does not containe the pxm (node)
infomation allow the driver to look up node info based on the address.  The
acpi_get_node call returns -1 if it can't decode the pxm info, this causes
add_memory to panic.  acpi_get_node would have to decode the resource from the
handle (a lenghty proposition).  This seems to be the cleanist point to
interject the hook.

[kamezawa.hiroyu@jp.fujitsu.com: build fixes]
[y-goto@jp.fujitsu.com: build fixes]
Signed-off-by: Keith Mannthey <kmannth@us.ibm.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Andi Kleen <ak@muc.de>
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Yasunori Goto <y-goto@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-01 00:39:18 -07:00
Yasunori Goto
07dd4855e7 ACPI: memory hotplug: remove useless message at boot time
This is to remove noisy useless message at boot.  The message is a ton of
"ACPI Exception (acpi_memory-0492): AE_ERROR, handle is no memory device"

In my emulation, number of memory devices are not so many (only 6), but,
this messages are displayed 114 times.

It is showed by acpi_memory_register_notify_handler() which is called by
acpi_walk_namespace().

acpi_walk_namespace() parses all of ACPI's namespace and execute
acpi_memory_register_notify_handler().  So, it is called for all of the
device which is defined in namespace.  If the parsing device is not memory,
acpi_memhotplug ignores it due to "no match" and will parse next device.
This is normal route, not an exception.

Signed-off-by: Yasunori Goto <y-goto@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Len Brown <len.brown@intel.com>
2006-08-16 00:29:26 -04:00
KAMEZAWA Hiroyuki
5d2870faaa [PATCH] memory hotadd fixes: avoid registering res twice
both of acpi_memory_enable_device() and acpi_memory_add_device() may evaluate
_CRS method.

We should avoid evaluate device's resource twice if we could get it
successfully in past.

Signed-off-by: KAMEZWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Keith Mannthey <kmannth@gmail.com>
Cc: Yasunori Goto <y-goto@jp.fujitsu.com>
Cc: Dave Hansen <haveblue@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-08-06 08:57:49 -07:00
KAMEZAWA Hiroyuki
fa25d8d6d3 [PATCH] memory hotadd fixes: avoid check in acpi
add_memory() does all necessary check to avoid collision.  then, acpi layer
doesn't have to check region by itself.

(*) pfn_valid() just returns page struct is valid or not. It returns 0
    if a section has been already added even is ioresource is not added.
    ioresource collision check in mm/memory_hotplug.c can do more precise
    collistion check.
    added enabled bit check just for sanity check..

Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Keith Mannthey <kmannth@gmail.com>
Cc: Yasunori Goto <y-goto@jp.fujitsu.com>
Cc: Dave Hansen <haveblue@us.ibm.com>
Cc: "Brown, Len" <len.brown@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-08-06 08:57:49 -07:00
Len Brown
5f765b8d68 Pull acpi_device_handle_cleanup into release branch 2006-07-01 17:19:34 -04:00
Len Brown
b197ba3c70 Pull acpi_os_free into release branch 2006-07-01 17:19:08 -04:00
akpm@osdl.org
0a1f1ab8de ACPI: fixup memhotplug debug message
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Len Brown <len.brown@intel.com>
2006-06-30 03:40:01 -04:00
Len Brown
02438d8771 ACPI: delete acpi_os_free(), use kfree() directly
Signed-off-by: Len Brown <len.brown@intel.com>
2006-06-30 03:19:10 -04:00
Patrick Mochel
9453ece926 ACPI: acpi_memhotplug: Remove unneeded acpi_handle from driver.
Signed-off-by: Patrick Mochel <mochel@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2006-06-30 02:50:43 -04:00
Patrick Mochel
b863278523 ACPI: acpi_memhotplug: Use acpi_device's handle instead of driver's
Signed-off-by: Patrick Mochel <mochel@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2006-06-30 02:42:02 -04:00
Patrick Mochel
3b74863df5 ACPI: acpi_memhotplug: add struct acpi_device to struct acpi_memory_device.
Signed-off-by: Patrick Mochel <mochel@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2006-06-30 02:20:53 -04:00
Len Brown
d120cfb544 merge linus into release branch
Conflicts:

	drivers/acpi/acpi_memhotplug.c
2006-06-29 19:57:46 -04:00
Yasunori Goto
1e3590e2e4 [PATCH] pgdat allocation for new node add (get node id by acpi)
This is to find node id from acpi's handle of memory_device in DSDT.  _PXM for
the new node can be found by acpi_get_pxm() by using new memory's handle.  So,
node id can be found by pxm_to_nid_map[].

  This patch becomes simpler than v2 of node hot-add patch.
  Because old add_memory() function doesn't have node id parameter.
  So, kernel must find its handle by physical address via DSDT again.
  But, v3 just give node id to add_memory() now.

Signed-off-by: Yasunori Goto <y-goto@jp.fujitsu.com>
Cc: Dave Hansen <haveblue@us.ibm.com>
Cc: "Brown, Len" <len.brown@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-27 17:32:36 -07:00
Yasunori Goto
bc02af93dd [PATCH] pgdat allocation for new node add (specify node id)
Change the name of old add_memory() to arch_add_memory.  And use node id to
get pgdat for the node at NODE_DATA().

Note: Powerpc's old add_memory() is defined as __devinit. However,
      add_memory() is usually called only after bootup.
      I suppose it may be redundant. But, I'm not well known about powerpc.
      So, I keep it. (But, __meminit is better at least.)

Signed-off-by: Yasunori Goto <y-goto@jp.fujitsu.com>
Cc: Dave Hansen <haveblue@us.ibm.com>
Cc: "Brown, Len" <len.brown@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-27 17:32:35 -07:00
Yasunori Goto
dd56a8e36f [PATCH] Catch notification of memory add event of ACPI via container driver. (avoid redundant call add_memory)
When acpi_memory_device_init() is called at boottime to register struct
memory acpi_memory_device, acpi_bus_add() are called via
acpi_driver_attach().

But it also calls ops->start() function.  It is called even if the memory
blocks are initialized at early boottime.  In this case add_memory() return
-EEXIST, and the memory blocks becomes INVALID state even if it is normal.

This is patch to avoid calling add_memory() for already available memory.

[akpm@osdl.org: coding cleanups]
Signed-off-by: Yasunori Goto <y-goto@jp.fujitsu.com>
Cc: "Brown, Len" <len.brown@intel.com>
Cc: Dave Hansen <haveblue@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-27 17:32:35 -07:00
Yasunori Goto
1f425994f9 [PATCH] Catch notification of memory add event of ACPI via container driver. (register start func for memory device)
This is a patch to call add_memroy() when notify reaches for new node's add
event.

When new node is added, notify of ACPI reaches container device which means
the node.

Container device driver calls acpi_bus_scan() to find and add belonging
devices (which means cpu, memory and so on).  Its function calls add and
start function of belonging devices's driver.

Howevever, current memory hotplug driver just register add function to
create sysfs file for its memory.  But, acpi_memory_enable_device() is not
called because it is considered just the case that notify reaches memory
device directly.  So, if notify reaches container device nothing can call
add_memory().

This is a patch to create start function which calls add_memory().
add_memory() can be called by this when notify reaches container device.

[akpm@osdl.org: coding cleanups]
Signed-off-by: Yasunori Goto <y-goto@jp.fujitsu.com>
Cc: "Brown, Len" <len.brown@intel.com>
Cc: Dave Hansen <haveblue@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-27 17:32:35 -07:00
KAMEZAWA Hiroyuki
9ac023989e [PATCH] acpi memory hotplug cannot manage _CRS with plural resoureces
Current acpi memory hotplug just looks into the first entry of resources in
_CRS.  But, _CRS can contain plural resources.  So, if _CRS contains plural
resoureces, acpi memory hot add cannot add all memory.

With this patch, acpi memory hotplug can deal with Memory Device, whose
_CRS contains plural resources.

Tested on ia64 memory hotplug test envrionment (not emulation, uses alpha
version firmware which supports dynamic reconfiguration of NUMA.)

Note: Microsoft's Windows Server 2003 requires big (>4G)resoureces to be
      divided into small (<4G) resources. looks crazy, but not invalid.
      (See http://www.microsoft.com/whdc/system/pnppwr/hotadd/hotaddmem.mspx)
      For this reason, a firmware vendor who supports Windows writes plural
      resources in a _CRS even if they are contiguous.

Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: "Brown, Len" <len.brown@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-27 17:32:35 -07:00
Patrick Mochel
d550d98d33 ACPI: delete tracing macros from drivers/acpi/*.c
Signed-off-by: Len Brown <len.brown@intel.com>
2006-06-27 00:41:40 -04:00
Len Brown
6468463abd ACPI: un-export ACPI_ERROR() -- use printk(KERN_ERR...)
Signed-off-by: Len Brown <len.brown@intel.com>
2006-06-27 00:01:06 -04:00
Thomas Renninger
a6fc67202e ACPI: Enable ACPI error messages w/o CONFIG_ACPI_DEBUG
Signed-off-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Len Brown <len.brown@intel.com>
2006-06-26 23:58:43 -04:00
Bjorn Helgaas
459c7266d7 ACPI: fix memory hotplug range length handling
Address space descriptors contain _MIN, _MAX, and _LEN.  _MIN and _MAX are
the bounds within which the region can be moved (this is clarified in Table
6-38 of the ACPI 3.0 spec).  We should use _LEN to determine the size of
the region, not _MAX - _MIN + 1.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Len Brown <len.brown@intel.com>
2006-04-01 22:05:18 -05:00
KAMEZAWA Hiroyuki
3963f00831 [ACPI] acpi_memhotplug.c build fix
drivers/acpi/acpi_memhotplug.c: In function `acpi_memory_get_device_resources':
drivers/acpi/acpi_memhotplug.c:101: error: structure has no member named `attribute'
drivers/acpi/acpi_memhotplug.c:103: error: structure has no member named `attribute'
drivers/acpi/acpi_memhotplug.c: In function `acpi_memory_disable_device':
drivers/acpi/acpi_memhotplug.c:253: warning: unused variable `attr'

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Len Brown <len.brown@intel.com>
2006-01-07 04:43:40 -05:00
Bob Moore
50eca3eb89 [ACPI] ACPICA 20050930
Completed a major overhaul of the Resource Manager code -
specifically, optimizations in the area of the AML/internal
resource conversion code. The code has been optimized to
simplify and eliminate duplicated code, CPU stack use has
been decreased by optimizing function parameters and local
variables, and naming conventions across the manager have
been standardized for clarity and ease of maintenance (this
includes function, parameter, variable, and struct/typedef
names.)

All Resource Manager dispatch and information tables have
been moved to a single location for clarity and ease of
maintenance. One new file was created, named "rsinfo.c".

The ACPI return macros (return_ACPI_STATUS, etc.) have
been modified to guarantee that the argument is
not evaluated twice, making them less prone to macro
side-effects. However, since there exists the possibility
of additional stack use if a particular compiler cannot
optimize them (such as in the debug generation case),
the original macros are optionally available.  Note that
some invocations of the return_VALUE macro may now cause
size mismatch warnings; the return_UINT8 and return_UINT32
macros are provided to eliminate these. (From Randy Dunlap)

Implemented a new mechanism to enable debug tracing for
individual control methods. A new external interface,
acpi_debug_trace(), is provided to enable this mechanism. The
intent is to allow the host OS to easily enable and disable
tracing for problematic control methods. This interface
can be easily exposed to a user or debugger interface if
desired. See the file psxface.c for details.

acpi_ut_callocate() will now return a valid pointer if a
length of zero is specified - a length of one is used
and a warning is issued. This matches the behavior of
acpi_ut_allocate().

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2005-12-10 00:20:25 -05:00
Dave Hansen
0b0acbec1b [PATCH] memory hotplug: move section_mem_map alloc to sparse.c
This basically keeps up from having to extern __kmalloc_section_memmap().

The vaddr_in_vmalloc_area() helper could go in a vmalloc header, but that
header gets hard to work with, because it needs some arch-specific macros.
Just stick it in here for now, instead of creating another header.

Signed-off-by: Dave Hansen <haveblue@us.ibm.com>
Signed-off-by: Lion Vollnhals <webmaster@schiggl.de>
Signed-off-by: Jiri Slaby <xslaby@fi.muni.cz>
Signed-off-by: Yasunori Goto <y-goto@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-29 21:40:44 -07:00
Len Brown
4be44fcd3b [ACPI] Lindent all ACPI files
Signed-off-by: Len Brown <len.brown@intel.com>
2005-08-05 00:45:14 -04:00
Linus Torvalds
1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00