Commit graph

85 commits

Author SHA1 Message Date
David Woodhouse
bd3c97a7c7 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6 2006-12-01 09:56:43 +00:00
Thomas Gleixner
29072b9607 [MTD] NAND: add subpage write support
Many SLC NANDs support up to 4 writes at one NAND page. Add support
of this feature.

Signed-off-by: Artem Bityutskiy <dedekind@infradead.org>
2006-11-29 17:03:52 +02:00
Vitaly Wool
7014568bad [MTD] [NAND] remove len/ooblen confusion.
As was discussed between Ricard Wanderlöf, David Woodhouse, Artem 
Bityutskiy and me, the current API for reading/writing OOB is confusing. 

The thing that introduces confusion is the need to specify ops.len 
together with ops.ooblen for reads/writes that concern only OOB not data 
area. So, ops.len is overloaded: when ops.datbuf != NULL it serves to 
specify the length of the data read, and when ops.datbuf == NULL, it 
serves to specify the full OOB read length.

The patch inlined below is the slightly updated version of the previous 
patch serving the same purpose, but with the new Artem's comments taken 
into account.

Artem, BTW, thanks a lot for your valuable input!

Signed-off-by: Vitaly Wool <vwool@ru.mvista.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-11-28 22:39:03 +00:00
Jesper Juhl
efbfe96c5d [PATCH] silence 'make xmldocs' warning by adding missing description of 'raw' in nand_base.c:1485
Add description of 'raw' in comments for
drivers/mtd/nand/nand_base.c::nand_write_page_syndrome() so 'make xmldocs'
will not spew a warning at us.

Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-27 15:34:51 -07:00
Ricard Wanderlöf
ff0dab64b4 [MTD] NAND: Fix nand_default_mark_blockbad() when flash-based BBT disabled
When a flash-based BBT is not used, nand_default_mark_blockbad() is supposed
to mark the block bad in the oob. However, it sets the wrong length variable
so that no bad block marker is in fact written. This patch attempts to
rectify that.

(As note, it seems to be that logically, it shouldn't be necessary to set
both length variables, as one appears to be for the main buffer, and
one for the oob buffer, but this is how it is done in several places,
including the code for the mtd character device MEMWRITEOOB and MEMREADOOB
ioctls. I'm not sure if this is a temporary solution during some rework of
the mtd infrastructure, or whether there is a deeper thought here.)

Signed-off-by: Ricard Wanderlöf <ricardw@axis.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-10-26 13:17:49 +03:00
David Woodhouse
784f4d5e66 [MTD] NAND: Correct setting of chip->oob_poi OOB buffer
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-10-22 01:47:45 +01:00
David Woodhouse
7dcdcbef5d [MTD] NAND: Combined oob buffer so it's contiguous with data
Ditch the separate oobrbuf and oobwbuf fields from the chip buffers,
and use only a single buffer immediately after the data. This accommodates
NAND controllers such as the OLPC CAFÉ chip, which can't do scatter/gather
DMA so needs the OOB buffer to be contiguous with the data, for both read
and write.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-10-21 17:48:58 +01:00
Artem Bityutskiy
d29ebdbee4 [MTD] core: trivial comments fix
Signed-off-by: Artem Bityutskiy <dedekind@infradead.org>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-10-21 16:42:53 +01:00
David Woodhouse
956e944c76 [MTD NAND] Allow override of page read and write functions.
- allow high-level nand_write_page() function to be overridden
- likewise low-level write_page_raw() and read_page_raw() functions
- Clean up the abuse of chip->ecc.{write,read}_page() with MTD_OOB_RAW

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-09-25 17:12:39 +01:00
David Woodhouse
4bf63fcb83 [MTD NAND] Allocate chip->buffers separately to allow it to be overridden
In particular, the board driver might need it to be DMAable.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-09-25 17:08:04 +01:00
David Woodhouse
3b85c3211e [MTD NAND] Split nand_scan() into two parts; allow board driver to intervene
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-09-25 17:06:53 +01:00
David Woodhouse
4b648b0253 [MTD NAND] Export nand_wait_ready() for use by board drivers
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-09-25 17:05:24 +01:00
David Woodhouse
0a7d5f8ce9 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6 2006-08-30 23:30:38 +01:00
Richard Purdie
7fd5aecc5d [PATCH] mtd corruption fix
Read the return value before we release the nand device otherwise the
value can become corrupted by another user of chip->ops, ultimately
resulting in filesystem corruption.

Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
Cc: David Woodhouse <dwmw2@infradead.org>
Acked-by: Josh Boyer <jwboyer@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-08-27 11:01:29 -07:00
David Woodhouse
9a909867d2 [MTD NAND] Fix lookup error in nand_get_flash_type()
Spotted by liyu <liyu@ccoss.com.cn>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-07-15 13:26:18 +01:00
Vitaly Wool
8b0036eefd [MTD] NAND: OOB buffer offset fixups
In the case of data-pad-ecc-pad-data... layout the oob start position
has to be sizeof(data) in nand_write_oob_syndrom().

In nand_fill_oob() we need to copy to buf + buffer offset instead of
buf + write offset.

From: Vitaly Wool <vwool@ru.mvista.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2006-07-11 09:11:25 +02:00
Randy Dunlap
844d3b427e MTD: fix all kernel-doc warnings
Fix all kernel-doc warnings in MTD headers and source files:
- add some missing struct fields;
- correct some function parameter names;
- use kernel-doc format for function doc. headers;
- nand_ecc.c contains only exported interfaces, no internal ones;

Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-06-29 08:55:00 +01:00
Thomas Gleixner
6a93096195 [MTD] NAND: Select chip before checking write protect status
The other way round works not really well with boards which have a
static NAND chipselect.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-06-27 23:24:09 +01:00
Savin Zlobec
0d420f9d61 [MTD] NAND: Missing fixups
The oob fixups broke a return value and missed one patch from
the Mailing List.

Signed-off-by: Savin Zlobec <savin@epico.si>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2006-06-21 13:11:56 +01:00
Thomas Gleixner
7bc3312bef [MTD] NAND: Fix breakage all over the place
Following problems are addressed:

- wrong status caused early break out of nand_wait()
- removed the bogus status check in nand_wait() which
  is a relict of the abandoned support for interrupted
  erase.
- status check moved to the correct place in read_oob
- oob support for syndrom based ecc with strange layouts
- use given offset in the AUTOOOB based oob operations

Partially based on a patch from Vitaly Vool <vwool@ru.mvista.com>
Thanks to Savin Zlobec <savin@epico.si> for tracking down the
status problem.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2006-06-20 20:31:24 +01:00
Vitaly Wool
7e4178f90e [PATCH] NAND: fix remaining OOB length calculation
In nand_read_page_syndrome/nand_write_page_syndrome the calculation of
the remaining oob length which is not used by the prepad/ecc/postpad
areas is wrong.

Signed-off-by: Vitaly Wool <vwool@ru.mvista.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2006-06-20 20:31:23 +01:00
Andrew Morton
7e9a0bb00c [MTD] Fix build warnings (and debug build error) in nand_base.c
drivers/mtd/nand/nand_base.c: In function 'nand_transfer_oob':
drivers/mtd/nand/nand_base.c:909: warning: comparison of distinct pointer types lacks a cast
drivers/mtd/nand/nand_base.c: In function 'nand_do_read_oob':
drivers/mtd/nand/nand_base.c:1097: error: 'len' undeclared (first use in this function)
drivers/mtd/nand/nand_base.c:1097: error: (Each undeclared identifier is reported only once
drivers/mtd/nand/nand_base.c:1097: error: for each function it appears in.)
drivers/mtd/nand/nand_base.c: In function 'nand_fill_oob':
drivers/mtd/nand/nand_base.c:1411: warning: comparison of distinct pointer types lacks a cast

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-05-30 09:06:41 +01:00
Thomas Gleixner
f1a28c0284 [MTD] NAND Expose the new raw mode function and status info to userspace
The raw read/write access to NAND (without ECC) has been changed in the
NAND rework. Expose the new way - setting the file mode via ioctl - to
userspace. Also allow to read out the ecc statistics information so userspace
tools can see that bitflips happened and whether errors where correctable
or not. Also expose the number of bad blocks for the partition, so nandwrite
can check if the data fits into the parition before writing to it.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2006-05-30 00:37:34 +02:00
Thomas Gleixner
9a1fcdfd4b [MTD] NAND Signal that a bitflip was corrected by ECC
Return -EUCLEAN on read when a bitflip was detected and corrected, so the
clients can react and eventually copy the affected block to a spare one.
Make all in kernel users aware of the change.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2006-05-29 15:06:51 +02:00
Thomas Gleixner
8593fbc68b [MTD] Rework the out of band handling completely
Hopefully the last iteration on this!

The handling of out of band data on NAND was accompanied by tons of fruitless
discussions and halfarsed patches to make it work for a particular
problem. Sufficiently annoyed by I all those "I know it better" mails and the
resonable amount of discarded "it solves my problem" patches, I finally decided
to go for the big rework. After removing the _ecc variants of mtd read/write
functions the solution to satisfy the various requirements was to refactor the
read/write _oob functions in mtd.

The major change is that read/write_oob now takes a pointer to an operation
descriptor structure "struct mtd_oob_ops".instead of having a function with at
least seven arguments.

read/write_oob which should probably renamed to a more descriptive name, can do
the following tasks:

- read/write out of band data
- read/write data content and out of band data
- read/write raw data content and out of band data (ecc disabled)

struct mtd_oob_ops has a mode field, which determines the oob handling mode.

Aside of the MTD_OOB_RAW mode, which is intended to be especially for
diagnostic purposes and some internal functions e.g. bad block table creation,
the other two modes are for mtd clients:

MTD_OOB_PLACE puts/gets the given oob data exactly to/from the place which is
described by the ooboffs and ooblen fields of the mtd_oob_ops strcuture. It's
up to the caller to make sure that the byte positions are not used by the ECC
placement algorithms.

MTD_OOB_AUTO puts/gets the given oob data automaticaly to/from the places in
the out of band area which are described by the oobfree tuples in the ecclayout
data structre which is associated to the devicee.

The decision whether data plus oob or oob only handling is done depends on the
setting of the datbuf member of the data structure. When datbuf == NULL then
the internal read/write_oob functions are selected, otherwise the read/write
data routines are invoked.

Tested on a few platforms with all variants. Please be aware of possible
regressions for your particular device / application scenario

Disclaimer: Any whining will be ignored from those who just contributed "hot
air blurb" and never sat down to tackle the underlying problem of the mess in
the NAND driver grown over time and the big chunk of work to fix up the
existing users. The problem was not the holiness of the existing MTD
interfaces. The problems was the lack of time to go for the big overhaul. It's
easy to add more mess to the existing one, but it takes alot of effort to go
for a real solution.

Improvements and bugfixes are welcome!

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2006-05-29 15:06:51 +02:00
Thomas Gleixner
5bd34c091a [MTD] NAND Replace oobinfo by ecclayout
The nand_oobinfo structure is not fitting the newer error correction
demands anymore. Replace it by struct nand_ecclayout and fixup the users
all over the place. Keep the nand_oobinfo based ioctl for user space
compability reasons.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2006-05-29 15:06:50 +02:00
Thomas Gleixner
ff268fb879 [MTD] NAND Consolidate oobinfo handling
The info structure for out of band data was copied into
the mtd structure. Make it a pointer and remove the ability
to set it from userspace. The position of ecc bytes is
defined by the hardware and should not be changed by software.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2006-05-29 15:06:49 +02:00
Thomas Gleixner
ba0251fe87 [MTD] NAND Consolidate references and add back default name setting
We have a type pointer. Make use of it instead of the error prone nand_ids[i]
reference.

The NAND driver used to set default name settings from the chip ID
string for the device. The feature got lost during the rework. Add it back.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2006-05-27 01:02:13 +02:00
Thomas Gleixner
cca3b837bb [MTD] NAND simplify nand_chip_select
nCE setting can be done when the first command is issued to the device.
We keep the deselect functionality as it makes sense to deassert nCE
when the device becomes idle.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2006-05-27 00:47:18 +02:00
David Woodhouse
29da9cea46 [MTD] Fix thinko in nand_write_page_hwecc()
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-05-26 23:05:44 +01:00
Thomas Gleixner
f75e5097ef [MTD] NAND modularize write function
Modularize the write function and reorganaize the internal buffer
management. Remove obsolete chip options and fixup all affected
users.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2006-05-26 18:52:08 +02:00
David Woodhouse
c5b553cc2c [MTD] Fix NAND_VERIFY_WRITE case to build with tglx's recent changes
Bad tglx. No biscuit.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-05-25 13:25:17 +01:00
Thomas Gleixner
f5bbdacc41 [MTD] NAND Modularize read function
Split the core of the read function out and implement
seperate handling functions for software and hardware
ECC.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2006-05-25 12:45:27 +01:00
Thomas Gleixner
7314e9e7d5 [MTD] NAND Cleanup oob functions
Cleanup the code in the oob related functions and
make use of the new NO_READRDY flag.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2006-05-25 12:45:27 +01:00
Thomas Gleixner
04bbd0eafb [MTD] NAND Initialize controller lock and wq only once
The lock simplifying patch did not move the lock and waitqueue
initialization into the controller allocation patch.
This reinitializes waitqueue and spinlocks also for driver
supplied controller stuctures. Move it into the allocation path.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2006-05-25 12:45:26 +01:00
Thomas Gleixner
12efdde313 [MTD] NAND fix cmd_ctrl breakage
The cmd_ctrl rework lacks some state transition flags.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2006-05-24 23:45:24 +01:00
Thomas Gleixner
ace4dfee56 [MTD] NAND coding style and namespace cleanup
Cleanup the functions which are not going to change in the
next steps.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2006-05-24 23:45:24 +01:00
Thomas Gleixner
d470a97c70 [MTD] NAND LED support cleanup
Move the define out of the middle of the code and add an
appropriate comment.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2006-05-23 23:48:57 +02:00
Thomas Gleixner
cad74f2c38 [MTD] NAND remove write_byte/word function from nand_chip
The previous change of the command / hardware control allows to
remove the write_byte/word functions completely, as their only
user were nand_command and nand_command_lp.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2006-05-23 23:28:48 +02:00
Thomas Gleixner
7abd3ef987 [MTD] Refactor NAND hwcontrol to cmd_ctrl
The hwcontrol function enforced a step by step state machine
for any kind of hardware chip access. Let the hardware driver
know which control bits are set and inform it about a change
of the control lines. Let the hardware driver write out the
command and address bytes directly. This gives a peformance
advantage for address bus controlled chips and simplifies the
quirks in the hardware drivers.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2006-05-23 23:25:53 +02:00
Thomas Gleixner
3821720d51 [MTD] Export nand_write_raw
The previous _ecc removal / cleanup broke (i)nftl module usage.
Export the missing symbol.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2006-05-23 22:33:52 +02:00
Thomas Gleixner
9223a456da [MTD] Remove read/write _ecc variants
MTD clients are agnostic of FLASH which needs ECC suppport.
Remove the functions and fixup the callers.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2006-05-23 17:21:03 +02:00
Thomas Gleixner
2528e8cdf3 [MTD] Remove readv/readv_ecc
These functions were never implemented and added only bloat to
partition and concat code.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2006-05-23 16:10:00 +02:00
Thomas Gleixner
9d8522df37 [MTD] Remove nand writev support
NAND writev(_ecc) support is not longer necessary. Remove it.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2006-05-23 16:06:03 +02:00
Thomas Gleixner
4cbb9b80e1 Merge branch 'master' of /home/tglx/work/kernel/git/mtd-2.6/
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2006-05-23 12:37:31 +02:00
Thomas Gleixner
6dfc6d250d [MTD] NAND modularize ECC
First step of modularizing ECC support.
- Move ECC related functionality into a seperate embedded data structure
- Get rid of the hardware dependend constants to simplify new ECC models

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2006-05-23 12:00:46 +02:00
Thomas Gleixner
7aa65bfd67 [MTD] NAND cleanup nand_scan
Seperate functionality out of nand_scan so the code is more
readable. No functional change. First step of simplifying
the nand driver.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2006-05-23 11:54:38 +02:00
Thomas Gleixner
58dd8f2bfd [MTD] NAND consolidate data types
The NAND driver used a mix of unsigned char, u_char amd uint8_t
data types. Consolidate to uint8_t usage

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2006-05-23 11:52:35 +02:00
Thomas Gleixner
2c0a2bed92 [MTD] NAND whitespace and formatting cleanup
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2006-05-23 11:50:56 +02:00
Thomas Gleixner
a36ed2995c [MTD] Simplify NAND locking
Replace the chip lock by a the controller lock. For simple drivers a
dummy controller structure is created by the scan code.
This simplifies the locking algorithm in nand_get/release_chip().

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2006-05-23 11:37:03 +02:00