Commit graph

19 commits

Author SHA1 Message Date
Josef "Jeff" Sipek
2fddfeefee [PATCH] proc: change uses of f_{dentry, vfsmnt} to use f_path
Change all the uses of f_{dentry,vfsmnt} to f_path.{dentry,mnt} in the proc
filesystem code.

Signed-off-by: Josef "Jeff" Sipek <jsipek@cs.sunysb.edu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-08 08:28:41 -08:00
David Howells
f269fdd182 [PATCH] NOMMU: move the fallback arch_vma_name() to a sensible place
Move the fallback arch_vma_name() to a sensible place (kernel/signal.c).

Currently it's in fs/proc/task_mmu.c, a file that is dependent on both
CONFIG_PROC_FS and CONFIG_MMU being enabled, but it's used from
kernel/signal.c from where it is called unconditionally.

[akpm@osdl.org: build fix]
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-27 08:26:15 -07:00
Ingo Molnar
e6e5494cb2 [PATCH] vdso: randomize the i386 vDSO by moving it into a vma
Move the i386 VDSO down into a vma and thus randomize it.

Besides the security implications, this feature also helps debuggers, which
can COW a vma-backed VDSO just like a normal DSO and can thus do
single-stepping and other debugging features.

It's good for hypervisors (Xen, VMWare) too, which typically live in the same
high-mapped address space as the VDSO, hence whenever the VDSO is used, they
get lots of guest pagefaults and have to fix such guest accesses up - which
slows things down instead of speeding things up (the primary purpose of the
VDSO).

There's a new CONFIG_COMPAT_VDSO (default=y) option, which provides support
for older glibcs that still rely on a prelinked high-mapped VDSO.  Newer
distributions (using glibc 2.3.3 or later) can turn this option off.  Turning
it off is also recommended for security reasons: attackers cannot use the
predictable high-mapped VDSO page as syscall trampoline anymore.

There is a new vdso=[0|1] boot option as well, and a runtime
/proc/sys/vm/vdso_enabled sysctl switch, that allows the VDSO to be turned
on/off.

(This version of the VDSO-randomization patch also has working ELF
coredumping, the previous patch crashed in the coredumping code.)

This code is a combined work of the exec-shield VDSO randomization
code and Gerd Hoffmann's hypervisor-centric VDSO patch. Rusty Russell
started this patch and i completed it.

[akpm@osdl.org: cleanups]
[akpm@osdl.org: compile fix]
[akpm@osdl.org: compile fix 2]
[akpm@osdl.org: compile fix 3]
[akpm@osdl.org: revernt MAXMEM change]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Arjan van de Ven <arjan@infradead.org>
Cc: Gerd Hoffmann <kraxel@suse.de>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Zachary Amsden <zach@vmware.com>
Cc: Andi Kleen <ak@muc.de>
Cc: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-27 17:32:38 -07:00
Eric W. Biederman
13b41b0949 [PATCH] proc: Use struct pid not struct task_ref
Incrementally update my proc-dont-lock-task_structs-indefinitely patches so
that they work with struct pid instead of struct task_ref.

Mostly this is a straight 1-1 substitution.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26 09:58:26 -07:00
Eric W. Biederman
99f8955183 [PATCH] proc: don't lock task_structs indefinitely
Every inode in /proc holds a reference to a struct task_struct.  If a
directory or file is opened and remains open after the the task exits this
pinning continues.  With 8K stacks on a 32bit machine the amount pinned per
file descriptor is about 10K.

Normally I would figure a reasonable per user process limit is about 100
processes.  With 80 processes, with a 1000 file descriptors each I can trigger
the 00M killer on a 32bit kernel, because I have pinned about 800MB of useless
data.

This patch replaces the struct task_struct pointer with a pointer to a struct
task_ref which has a struct task_struct pointer.  The so the pinning of dead
tasks does not happen.

The code now has to contend with the fact that the task may now exit at any
time.  Which is a little but not muh more complicated.

With this change it takes about 1000 processes each opening up 1000 file
descriptors before I can trigger the OOM killer.  Much better.

[mlp@google.com: task_mmu small fixes]
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Cc: Paul Jackson <pj@sgi.com>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Albert Cahalan <acahalan@gmail.com>
Signed-off-by: Prasanna Meda <mlp@google.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26 09:58:25 -07:00
Eric W. Biederman
662795deb8 [PATCH] proc: Move proc_maps_operations into task_mmu.c
All of the functions for proc_maps_operations are already defined in
task_mmu.c so move the operations structure to keep the functionality
together.

Since task_nommu.c implements a dummy version of /proc/<pid>/maps give it a
simplified version of proc_maps_operations that it can modify to best suit its
needs.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26 09:58:24 -07:00
Nick Piggin
ad820c5dd4 [PATCH] smaps: shared fix
The point of the smaps "shared" is to count the number of pages that are
mapped by more than one process, according to Mauricio Lin.  However, smaps
uses page_count for this, so it will return a false positive for every page
that is mapped by just that one process, which is also in pagecache or
swapcache.  There are false positive situations for anonymous pages not in
swapcache as well: - page reclaim, migration - get_user_pages (eg.
direct-io, ptrace)

Use page_mapcount instead, to count the number of mappings to the page.

Use vm_normal_page so that weird things like /dev/mem aren't counted either.

Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-06 18:40:45 -08:00
Nick Piggin
5ddfae16bd [PATCH] smaps: hugepages fix
smaps doesn't have a hugepage pagetable walker. Skip walking hugepage
vmas.

Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-06 18:40:45 -08:00
Christoph Lameter
1a75a6c825 [PATCH] Fold numa_maps into mempolicies.c
First discussed at http://marc.theaimsgroup.com/?t=113149255100001&r=1&w=2

- Use the check_range() in mempolicy.c to gather statistics.

- Improve the numa_maps code in general and fix some comments.

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Cc: Andi Kleen <ak@muc.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 20:12:44 -08:00
Linus Torvalds
6aab341e0a mm: re-architect the VM_UNPAGED logic
This replaces the (in my opinion horrible) VM_UNMAPPED logic with very
explicit support for a "remapped page range" aka VM_PFNMAP.  It allows a
VM area to contain an arbitrary range of page table entries that the VM
never touches, and never considers to be normal pages.

Any user of "remap_pfn_range()" automatically gets this new
functionality, and doesn't even have to mark the pages reserved or
indeed mark them any other way.  It just works.  As a side effect, doing
mmap() on /dev/mem works for arbitrary ranges.

Sparc update from David in the next commit.

Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-28 14:34:23 -08:00
Luiz Fernando Capitulino
0f5c79f292 [PATCH] Fix sparse warning in proc/task_mmu.c
fs/proc/task_mmu.c:198:33: warning: Using plain integer as NULL pointer

Signed-off-by: Luiz Capitulino <lcapitulino@mandriva.com.br>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-13 18:14:15 -08:00
Hugh Dickins
deceb6cd17 [PATCH] mm: follow_page with inner ptlock
Final step in pushing down common core's page_table_lock.  follow_page no
longer wants caller to hold page_table_lock, uses pte_offset_map_lock itself;
and so no page_table_lock is taken in get_user_pages itself.

But get_user_pages (and get_futex_key) do then need follow_page to pin the
page for them: take Daniel's suggestion of bitflags to follow_page.

Need one for WRITE, another for TOUCH (it was the accessed flag before:
vanished along with check_user_page_readable, but surely get_numa_maps is
wrong to mark every page it finds as accessed), another for GET.

And another, ANON to dispose of untouched_anonymous_page: it seems silly for
that to descend a second time, let follow_page observe if there was no page
table and return ZERO_PAGE if so.  Fix minor bug in that: check VM_LOCKED -
make_pages_present ought to make readonly anonymous present.

Give get_numa_maps a cond_resched while we're there.

Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-29 21:40:41 -07:00
Hugh Dickins
705e87c0c3 [PATCH] mm: pte_offset_map_lock loops
Convert those common loops using page_table_lock on the outside and
pte_offset_map within to use just pte_offset_map_lock within instead.

These all hold mmap_sem (some exclusively, some not), so at no level can a
page table be whipped away from beneath them.  But whereas pte_alloc loops
tested with the "atomic" pmd_present, these loops are testing with pmd_none,
which on i386 PAE tests both lower and upper halves.

That's now unsafe, so add a cast into pmd_none to test only the vital lower
half: we lose a little sensitivity to a corrupt middle directory, but not
enough to worry about.  It appears that i386 and UML were the only
architectures vulnerable in this way, and pgd and pud no problem.

Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-29 21:40:40 -07:00
Hugh Dickins
365e9c87a9 [PATCH] mm: update_hiwaters just in time
update_mem_hiwater has attracted various criticisms, in particular from those
concerned with mm scalability.  Originally it was called whenever rss or
total_vm got raised.  Then many of those callsites were replaced by a timer
tick call from account_system_time.  Now Frank van Maarseveen reports that to
be found inadequate.  How about this?  Works for Frank.

Replace update_mem_hiwater, a poor combination of two unrelated ops, by macros
update_hiwater_rss and update_hiwater_vm.  Don't attempt to keep
mm->hiwater_rss up to date at timer tick, nor every time we raise rss (usually
by 1): those are hot paths.  Do the opposite, update only when about to lower
rss (usually by many), or just before final accounting in do_exit.  Handle
mm->hiwater_vm in the same way, though it's much less of an issue.  Demand
that whoever collects these hiwater statistics do the work of taking the
maximum with rss or total_vm.

And there has been no collector of these hiwater statistics in the tree.  The
new convention needs an example, so match Frank's usage by adding a VmPeak
line above VmSize to /proc/<pid>/status, and also a VmHWM line above VmRSS
(High-Water-Mark or High-Water-Memory).

There was a particular anomaly during mremap move, that hiwater_vm might be
captured too high.  A fleeting such anomaly remains, but it's quickly
corrected now, whereas before it would stick.

What locking?  None: if the app is racy then these statistics will be racy,
it's not worth any overhead to make them exact.  But whenever it suits,
hiwater_vm is updated under exclusive mmap_sem, and hiwater_rss under
page_table_lock (for now) or with preemption disabled (later on): without
going to any trouble, minimize the time between reading current values and
updating, to minimize those occasions when a racing thread bumps a count up
and back down in between.

Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-29 21:40:39 -07:00
Hugh Dickins
4294621f41 [PATCH] mm: rss = file_rss + anon_rss
I was lazy when we added anon_rss, and chose to change as few places as
possible.  So currently each anonymous page has to be counted twice, in rss
and in anon_rss.  Which won't be so good if those are atomic counts in some
configurations.

Change that around: keep file_rss and anon_rss separately, and add them
together (with get_mm_rss macro) when the total is needed - reading two
atomics is much cheaper than updating two atomics.  And update anon_rss
upfront, typically in memory.c, not tucked away in page_add_anon_rmap.

Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-29 21:40:38 -07:00
Andi Kleen
dfcd3c0dc4 [PATCH] Convert mempolicies to nodemask_t
The NUMA policy code predated nodemask_t so it used open coded bitmaps.
Convert everything to nodemask_t.  Big patch, but shouldn't have any actual
behaviour changes (except I removed one unnecessary check against
node_online_map and one unnecessary BUG_ON)

Signed-off-by: "Andi Kleen" <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-29 21:40:35 -07:00
Mauricio Lin
e070ad49f3 [PATCH] add /proc/pid/smaps
Add a "smaps" entry to /proc/pid: show howmuch memory is resident in each
mapping.

People that want to perform a memory consumption analysing can use it
mainly if someone needs to figure out which libraries can be reduced for
embedded systems.  So the new features are the physical size of shared and
clean [or dirty]; private and clean [or dirty].

Take a look the example below:

# cat /proc/4576/smaps

08048000-080dc000 r-xp /bin/bash
Size:               592 KB
Rss:                500 KB
Shared_Clean:       500 KB
Shared_Dirty:         0 KB
Private_Clean:        0 KB
Private_Dirty:        0 KB
080dc000-080e2000 rw-p /bin/bash
Size:                24 KB
Rss:                 24 KB
Shared_Clean:         0 KB
Shared_Dirty:         0 KB
Private_Clean:        0 KB
Private_Dirty:       24 KB
080e2000-08116000 rw-p
Size:               208 KB
Rss:                208 KB
Shared_Clean:         0 KB
Shared_Dirty:         0 KB
Private_Clean:        0 KB
Private_Dirty:      208 KB
b7e2b000-b7e34000 r-xp /lib/tls/libnss_files-2.3.2.so
Size:                36 KB
Rss:                 12 KB
Shared_Clean:        12 KB
Shared_Dirty:         0 KB
Private_Clean:        0 KB
Private_Dirty:        0 KB
...

(Includes a cleanup from "Richard Purdie" <rpurdie@rpsys.net>)

From: Torsten Foertsch <torsten.foertsch@gmx.net>

show_smap calls first show_map and then prints its additional information to
the seq_file.  show_map checks if all it has to print fits into the buffer and
if yes marks the current vma as written.  While that is correct for show_map
it is not for show_smap.  Here the vma should be marked as written only after
the additional information is also written.

The attached patch cures the problem.  It moves the functionality of the
show_map function to a new function show_map_internal that is called with an
additional struct mem_size_stats* argument.  Then show_map calls
show_map_internal with NULL as struct mem_size_stats* whereas show_smap calls
it with a real pointer.  Now the final

	if (m->count < m->size)  /* vma is copied successfully */
		m->version = (vma != get_gate_vma(task))? vma->vm_start: 0;

is done only if the whole entry fits into the buffer.

Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-05 00:05:49 -07:00
Christoph Lameter
6e21c8f145 [PATCH] /proc/<pid>/numa_maps to show on which nodes pages reside
This patch was recently discussed on linux-mm:
http://marc.theaimsgroup.com/?t=112085728500002&r=1&w=2

I inherited a large code base from Ray for page migration.  There was a
small patch in there that I find to be very useful since it allows the
display of the locality of the pages in use by a process.  I reworked that
patch and came up with a /proc/<pid>/numa_maps that gives more information
about the vma's of a process.  numa_maps is indexes by the start address
found in /proc/<pid>/maps.  F.e.  with this patch you can see the page use
of the "getty" process:

margin:/proc/12008 # cat maps
00000000-00004000 r--p 00000000 00:00 0
2000000000000000-200000000002c000 r-xp 00000000 08:04 516                /lib/ld-2.3.3.so
2000000000038000-2000000000040000 rw-p 00028000 08:04 516                /lib/ld-2.3.3.so
2000000000040000-2000000000044000 rw-p 2000000000040000 00:00 0
2000000000058000-2000000000260000 r-xp 00000000 08:04 54707842           /lib/tls/libc.so.6.1
2000000000260000-2000000000268000 ---p 00208000 08:04 54707842           /lib/tls/libc.so.6.1
2000000000268000-2000000000274000 rw-p 00200000 08:04 54707842           /lib/tls/libc.so.6.1
2000000000274000-2000000000280000 rw-p 2000000000274000 00:00 0
2000000000280000-20000000002b4000 r--p 00000000 08:04 9126923            /usr/lib/locale/en_US.utf8/LC_CTYPE
2000000000300000-2000000000308000 r--s 00000000 08:04 60071467           /usr/lib/gconv/gconv-modules.cache
2000000000318000-2000000000328000 rw-p 2000000000318000 00:00 0
4000000000000000-4000000000008000 r-xp 00000000 08:04 29576399           /sbin/mingetty
6000000000004000-6000000000008000 rw-p 00004000 08:04 29576399           /sbin/mingetty
6000000000008000-600000000002c000 rw-p 6000000000008000 00:00 0          [heap]
60000fff7fffc000-60000fff80000000 rw-p 60000fff7fffc000 00:00 0
60000ffffff44000-60000ffffff98000 rw-p 60000ffffff44000 00:00 0          [stack]
a000000000000000-a000000000020000 ---p 00000000 00:00 0                  [vdso]

cat numa_maps
2000000000000000 default MaxRef=43 Pages=11 Mapped=11 N0=4 N1=3 N2=2 N3=2
2000000000038000 default MaxRef=1 Pages=2 Mapped=2 Anon=2 N0=2
2000000000040000 default MaxRef=1 Pages=1 Mapped=1 Anon=1 N0=1
2000000000058000 default MaxRef=43 Pages=61 Mapped=61 N0=14 N1=15 N2=16 N3=16
2000000000268000 default MaxRef=1 Pages=2 Mapped=2 Anon=2 N0=2
2000000000274000 default MaxRef=1 Pages=3 Mapped=3 Anon=3 N0=3
2000000000280000 default MaxRef=8 Pages=3 Mapped=3 N0=3
2000000000300000 default MaxRef=8 Pages=2 Mapped=2 N0=2
2000000000318000 default MaxRef=1 Pages=1 Mapped=1 Anon=1 N2=1
4000000000000000 default MaxRef=6 Pages=2 Mapped=2 N1=2
6000000000004000 default MaxRef=1 Pages=1 Mapped=1 Anon=1 N0=1
6000000000008000 default MaxRef=1 Pages=1 Mapped=1 Anon=1 N0=1
60000fff7fffc000 default MaxRef=1 Pages=1 Mapped=1 Anon=1 N0=1
60000ffffff44000 default MaxRef=1 Pages=1 Mapped=1 Anon=1 N0=1

getty uses ld.so.  The first vma is the code segment which is used by 43
other processes and the pages are evenly distributed over the 4 nodes.

The second vma is the process specific data portion for ld.so.  This is
only one page.

The display format is:

<startaddress>	 Links to information in /proc/<pid>/map
<memory policy>  This can be "default" "interleave={}", "prefer=<node>" or "bind={<zones>}"
MaxRef=		<maximum reference to a page in this vma>
Pages=		<Nr of pages in use>
Mapped=		<Nr of pages with mapcount >
Anon=		<nr of anonymous pages>
Nx=		<Nr of pages on Node x>

The content of the proc-file is self-evident.  If this would be tied into
the sparsemem system then the contents of this file would not be too
useful.

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Cc: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-05 00:05:43 -07:00
Linus Torvalds
1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00