Commit graph

32 commits

Author SHA1 Message Date
Paul Mundt
fce3a24e70 sh: push-switch fixups for work_struct API damage.
INIT_WORK() dropped the data arg, so now we have to stash an extra
pointer and backpedal instead.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-12 08:42:07 +09:00
Jamie Lenehan
ea0f8feaa0 sh: sh775x/titan fixes for irq header changes.
The following moves the creation of IPR interupts into setup-7750.c
and updates a few other things to make it all work after the "Drop
CPU subtype IRQ headers" commit. It boots and runs fine on my titan
board.

 - adds an ipr_idx to the ipr_data and uses a function in the subtype
   code to calculate the address of the IPR registers

 - adds a function to enable individual interrupt mode for externals
   in the subtype code and calls that from the titan board code
   instead of doing it directly.

 - I changed the shift in the ipr_data to be the actual # of bits to
   shift, instead of the numnber / 4 - made it easier to match with
   the manual.

Signed-off-by: Jamie Lenehan <lenehan@twibble.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-06 12:05:02 +09:00
Mark Glaisher
db9b99d461 sh: dma-api channel capability extensions.
This extends the SH DMA API for allowing handling of DMA
channels based off of their respective capabilities.

A couple of functions are added to the existing API,
the core bits are register_chan_caps() for registering
channel capabilities, and request_dma_bycap() for fetching
a channel dynamically based off of a capability set.

Signed-off-by: Mark Glaisher <mark.glaisher@st.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-06 10:45:39 +09:00
Paul Mundt
e803aaf63a sh: Drop name overload in dma-sh.
Pass along the dev_id from request_dma() all the way down,
rather than inserting an artificial name relating to the TEI
line that we were doing before.

This makes the line a bit less obvious, but dev_id is the proper
behaviour for this regardless.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-06 10:45:39 +09:00
Paul Mundt
49f860bb5d sh: Make dma-isa depend on ISA_DMA_API.
Previously we linked in the ISA DMA wrapper unconditionally.
As there are very few users of this, it's better to make it
conditional.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-06 10:45:39 +09:00
Paul Mundt
4dfc119f1c sh: dma-sysfs fixes.
Handle the case where no registered DMACs exist somewhat more
gracefully. While we're at it, check for sysdev_create_file()
failing.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-06 10:45:39 +09:00
Paul Mundt
9f5e8eee5c sh: generic push-switch framework.
This adds support for a generic push switch framework. Adaptable for
various switches, including GPIO switches and the push switches commonly
found on Renesas debug boards.

This allows switch states to be trivially reported through sysfs.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-06 10:45:38 +09:00
Paul Mundt
9a7ef6d59f sh: Drop CPU subtype IRQ headers.
This drops the various IRQ headers that were floating around
and primarily providing hardcoded IRQ definitions for the
various CPU subtypes. This quickly got to be an unmaintainable
mess, made even more evident by the subtle breakage introduced
by the SH-2 and SH-2A changes.

Now that subtypes are able to register IRQ maps directly, just
rip all of the headers out.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-06 10:45:37 +09:00
Jamie Lenehan
bd71ab88de sh: Fix IPR-IRQ's for IRQ-chip change breakage.
The conversion from IPR-IRQ to IRQ-chip resulted in the
ipr data being allocated in a local variable in
make_ipr_irq - breaking anything using IPR interrupts.

This changes all of the callers of make_ipr_irq to
allocate a static structure containing the IPR data which
is then passed to make_ipr_irq. This removes the need for
make_ipr_irq to allocate any additional space for the IPR
information.

Signed-off-by: Jamie Lenehan <lenehan@twibble.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-10-31 12:53:28 +09:00
Paul Mundt
082c44d20e sh: Cleanup board header directories.
Now with the ide.h mess sorted out, most of these boards
don't need their own directory. Move the headers out, and
update the driver paths.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-10-19 16:30:32 +09:00
Jamie Lenehan
580410005d sh: Fix pr_debug statements for sh4
Fix a problem uncovered by the recent change to always check the
arguments to pr_debug. The sh7751 was using the wrong name for the
PCI IO base address.

Signed-off-by: Jamie Lenehan <lenehan@twibble.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-10-06 15:36:15 +09:00
Paul Mundt
35f3c5185b sh: Updates for IRQ handler changes.
Trivial fixes for build breakage introduced by IRQ handler changes.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-10-06 15:31:16 +09:00
Uwe Zeisberger
f30c226954 fix file specification in comments
Many files include the filename at the beginning, serveral used a wrong one.

Signed-off-by: Uwe Zeisberger <Uwe_Zeisberger@digi.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-10-03 23:01:26 +02:00
Paul Mundt
2914d4da17 sh: Kill off remaining config.h references.
A few of these managed to sneak back in, get rid of them once
and for all.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-10-03 13:19:02 +09:00
Paul Mundt
711fa80968 sh: build fixes for defconfigs.
Get all of the defconfigs building again.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-10-03 13:14:04 +09:00
Paul Mundt
0f08f33808 sh: More cosmetic cleanups and trivial fixes.
Nothing exciting here, just trivial fixes..

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27 17:03:56 +09:00
Paul Mundt
9e3043c091 sh: Fixup TEI IRQ requests in request_dma().
If a channel is not TEI capable, don't try to request_irq()..

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27 16:55:24 +09:00
Paul Mundt
e2d1864da5 sh: G2 DMA IRQ and residue sampling.
This fixes a long-standing FIXME for G2 DMA, where we finally
wire up the IRQ handler and allow for sampling remaining bytes
while in-flight.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27 16:53:40 +09:00
Paul Mundt
a3e61d50dc sh: Inhibit mapping PCI apertures through page tables.
Inhibit mapping through page tables in __ioremap() for PCI memory
apertures on SH7751 and SH7780-style PCI controllers, translation is
not possible for these areas. For other users that map a small window
in P1/P2 space, ioremap() traps that already, and should never make
it to __ioremap().

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27 16:45:22 +09:00
Paul Mundt
959f85f8a3 sh: Consolidated SH7751/SH7780 PCI support.
This cleans up quite a lot of the PCI mess that we
currently have, and attempts to consolidate the
duplication in the SH7780 and SH7751 PCI controllers.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27 16:43:28 +09:00
Paul Mundt
5283ecb5cc sh: Add support for R7780RP and R7780MP boards.
This adds support for the Renesas SH7780 development boards,
R7780RP and R7780MP.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27 15:59:17 +09:00
Paul Mundt
d7cdc9e8ac sh: ioremap() overhaul.
ioremap() overhaul. Add support for transparent PMB mapping, get rid of
p3_ioremap(), etc. Also drop ioremap() and iounmap() routines from the
machvec, as everyone can use the generic ioremap() API instead. For PCI
memory apertures and other special cases, use the pci_iomap() API, as
boards are already required to get the mapping right there.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27 15:16:42 +09:00
Jamie Lenehan
a09749dd86 sh: Titan board support.
Add support for the titan board.

Signed-off-by: Jamie Lenehan <lenehan@twibble.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27 15:05:39 +09:00
Paul Mundt
e4c2cfee5d sh: Various cosmetic cleanups.
We had quite a bit of whitespace damage, clean most of it up..

Signed-off-by: Stuart Menefy <stuart.menefy@st.com>
Signed-off-by: Arthur Othieno <a.othieno@bluewin.ch>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27 12:31:01 +09:00
Thomas Gleixner
6d20819f80 [PATCH] irq-flags: SH: Use the new IRQF_ constants
Use the new IRQF_ constants and remove the SA_INTERRUPT define

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Kazumoto Kojima <kkojima@rr.iij4u.or.jp>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-02 13:58:48 -07:00
Jörn Engel
6ab3d5624e Remove obsolete #include <linux/config.h>
Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-06-30 19:25:36 +02:00
Greg Kroah-Hartman
e31dd6e452 [PATCH] 64bit resource: change pci core and arch code to use resource_size_t
Based on a patch series originally from Vivek Goyal <vgoyal@in.ibm.com>

Cc: Vivek Goyal <vgoyal@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-27 09:24:00 -07:00
Paul Mundt
0d831770b1 [PATCH] sh: DMA updates
This extends the current SH DMA API somewhat to support a proper virtual
channel abstraction, and also works to represent this through the driver model
by giving each DMAC its own platform device.

There's also a few other minor changes to support a few new CPU subtypes, and
make TEI generation for the SH DMAC configurable.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-16 23:15:27 -08:00
Paul Mundt
d5cb978353 [PATCH] sh: SuperHyway support for SH4-202
This adds support for the relatively quirky (ie, not in line with any known
documentation, and amazed it works at all) SuperHyway implementation on
SH4-202.  This depends on the earlier SuperHyway patch for multiple block
support and VCR refactoring.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 07:53:28 -08:00
Tim Schmielau
4e57b68178 [PATCH] fix missing includes
I recently picked up my older work to remove unnecessary #includes of
sched.h, starting from a patch by Dave Jones to not include sched.h
from module.h. This reduces the number of indirect includes of sched.h
by ~300. Another ~400 pointless direct includes can be removed after
this disentangling (patch to follow later).
However, quite a few indirect includes need to be fixed up for this.

In order to feed the patches through -mm with as little disturbance as
possible, I've split out the fixes I accumulated up to now (complete for
i386 and x86_64, more archs to follow later) and post them before the real
patch.  This way this large part of the patch is kept simple with only
adding #includes, and all hunks are independent of each other.  So if any
hunk rejects or gets in the way of other patches, just drop it.  My scripts
will pick it up again in the next round.

Signed-off-by: Tim Schmielau <tim@physik3.uni-rostock.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30 17:37:32 -08:00
Al Viro
6dae2c2306 [PATCH] gfp_t: dma-mapping (sh)
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-28 08:16:48 -07:00
Linus Torvalds
1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00