Commit graph

345 commits

Author SHA1 Message Date
Anton Blanchard
f1870f772c [PATCH] powerpc64: remove broken/bitrotted HMT support
HMT support is currently broken and needs to be reworked to play nicely
with the SMT scheduler. Remove the bit rotten bits for the time being.

I also updated an incorrect comment, we enter __secondary_hold with the
physical cpu id in r3.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-02-24 11:36:33 +11:00
Anton Blanchard
cb2c9b2741 [PATCH] powerpc: Fix runlatch performance issues
The runlatch SPR can take a lot of time to write. My original runlatch
code would set it on every exception entry even though most of the time
this was not required. It would also continually set it in the idle
loop, which is an issue on an SMT capable processor.

Now we cache the runlatch value in a threadinfo bit, and only check for
it in decrementer and hardware interrupt exceptions as well as the idle
loop. Boot on POWER3, POWER5 and iseries, and compile tested on pmac32.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-02-24 11:36:31 +11:00
Alan Curry
f1434a4854 [PATCH] powerpc: fix altivec_unavailable_exception Oopses
altivec_unavailable_exception is called without setting r3... it looks like
the r3 that actually gets passed in as struct pt_regs *regs is the
undisturbed value of r3 at the time the altivec instruction was encountered.
The user actually gets to choose the pt_regs printed in the Oops!

This fixes the oops by passing the correct pt_regs pointer to
altivec_unavailable_exception.

Signed-off-by: Alan Curry <pacman@TheWorld.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-02-24 11:36:23 +11:00
Haren Myneni
01aaed9d43 [PATCH] powerpc: Trivial fix to set the proper timeout value for kdump
The panic CPU is waiting forever due to some large timeout value if some
CPU is not responding to an IPI.
This patch fixes the problem - the maximum waiting period will be
10 seconds and then the kdump boot will go ahead.

Signed-off-by: Haren Myneni <haren@us.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-02-24 11:36:21 +11:00
Michael Ellerman
337a7128db [PATCH] powerpc: Only calculate htab_size in one place for kexec
For kexec we need to know the size of the MMU hash table.

Currently we calculate the size once in the htab code, and then twice more in
the kexec code, once using htab_hash_mask and once using ppc64_pft_size.
On some machines the ppc64_pft_size calculation is broken because
ppc64_pft_size is not set.

So we need to fix the second calculation, but better still we should just
calculate the size once and use it everywhere else.

Tested on Power5 LPAR, Power4 non-LPAR and Power3.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-02-24 11:36:18 +11:00
Michael Ellerman
8fca92705e [PATCH] powerpc: Make UP -> SMP kexec work again
For UP to SMP kexec to work we need to jump into pSeries_secondary_smp_init
event on a UP + KEXEC kernel. The secondary cpus will not find their hw_cpu_id
in the paca and so they'll jump into kexec_wait, ready for a kexec.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-02-20 12:03:36 +11:00
Michael Ellerman
f018b36f3e [PATCH] powerpc: Don't start secondary CPUs in a UP && KEXEC kernel
Because smp_release_cpus() is built for SMP || KEXEC, it's not safe to
unconditionally call it from setup_system(). On a UP && KEXEC kernel we'll
start up the secondary CPUs which will then go beserk and we die.

Simple fix is to conditionally call smp_release_cpus() in setup_system(). With
that in place we don't need the dummy definition of smp_release_cpus() because
all call sites are #ifdef'ed either SMP or KEXEC.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-02-20 12:03:34 +11:00
Olof Johansson
2b9a32edba [PATCH] powerpc: Fix OOPS in lparcfg on G5
Fallback gracefully when reading /proc/ppc64/lparcfg when the /rtas
device node can't be found.

Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-02-20 10:44:34 +11:00
Olaf Hering
0728a2f99e [PATCH] powerpc: remove duplicate exports
A few symbols are exported twice, remove them from ppc_ksyms.c
Remove users of sys_ctrler in arch/ppc/

WARNING: vmlinux: duplicate symbol '__delay' previous definition was in vmlinux
WARNING: vmlinux: duplicate symbol '__up' previous definition was in vmlinux
WARNING: vmlinux: duplicate symbol '__down' previous definition was in vmlinux
WARNING: vmlinux: duplicate symbol '__down_interruptible' previous definition was in vmlinux
WARNING: vmlinux: duplicate symbol 'sys_ctrler' previous definition was in vmlinux
WARNING: vmlinux: duplicate symbol 'strncat' previous definition was in vmlinux
WARNING: vmlinux: duplicate symbol 'strncmp' previous definition was in vmlinux
WARNING: vmlinux: duplicate symbol 'strchr' previous definition was in vmlinux
WARNING: vmlinux: duplicate symbol 'strrchr' previous definition was in vmlinux
WARNING: vmlinux: duplicate symbol 'strnlen' previous definition was in vmlinux
WARNING: vmlinux: duplicate symbol 'strpbrk' previous definition was in vmlinux
WARNING: vmlinux: duplicate symbol 'memscan' previous definition was in vmlinux
WARNING: vmlinux: duplicate symbol 'strstr' previous definition was in vmlinux

Signed-off-by: Olaf Hering <olh@suse.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-02-20 10:44:31 +11:00
Paul Mackerras
092b8f3488 powerpc: Keep xtime and gettimeofday in sync
This fixes a regression which was introduced by moving ppc32 to use
the same sort of lockless gettimeofday as ppc64 has been using for
some time.  This involves getting the timebase and performing some
simple arithmetic to convert it to seconds and microseconds.  However,
the factor and offset used there weren't being updated when NTP
varied the tick length using adjtimex.  64-bit didn't notice the
problem because it had a hook in the 32-bit adjtimex compat routine
that attempted to work out what the generic timekeeping code would
do and alter the factor and offset to match.  However, that code
was very complex and it wasn't clear that it still matched what the
generic code would do.

Now we use the generic current_tick_length() routine that was recently
added to check that the current tick will be as long as we expect; if
not we recompute the factor and offset.  This keeps gettimeofday and
xtime in sync.  In addition we check that gettimeofday hasn't got ahead
of xtime on each timer interrupt; if it has, we resync.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-02-20 10:38:56 +11:00
JANAK DESAI
b37ce281d7 [PATCH] powerpc: unshare system call registration
Registers system call for the powerpc architecture.

Signed-off-by: Janak Desai <janak@us.ibm.com>
Cc: Al Viro <viro@ftp.linux.org.uk>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Michael Kerrisk <mtk-manpages@gmx.net>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Andi Kleen <ak@muc.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-02-10 16:34:54 +11:00
Paul Mackerras
8568daa490 ppc: Use the system call table from arch/powerpc/kernel/systbl.S
With this, new system calls only have to be wired up in one place
for ARCH=ppc and ARCH=powerpc, rather than 2.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-02-10 16:02:20 +11:00
Al Viro
29e646df78 [PATCH] powerpc signal __user annotations
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2006-02-08 01:03:46 -05:00
Nathan Lynch
7d4d61544a [PATCH] powerpc: avoid timer interrupt replay effect when onlining cpu
When a cpu is hotplug-onlined, if we don't set per_cpu(last_jiffy) to
something sane, timer_interrupt will execute its while loop for every
tick missed since the cpu was last online (or since the system was
booted, if we're adding a new cpu).  This can cause weird hangs, ssh
sessions dropping, and we can even go xmon if we take a global IPI at
the wrong time.

Signed-off-by: Nathan Lynch <ntl@pobox.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-02-07 21:51:54 +11:00
Michael Ellerman
f9b4045d6b [PATCH] powerpc: Don't use toc in decrementer_iSeries_masked
Since 404849bbd2 we've been using
LOAD_REG_ADDRBASE, which uses the toc pointer, in decrementer_iSeries_masked.

This can explode if we take the decrementer interrupt while we're in a module,
because the toc pointer in r2 will be the module's toc pointer.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-02-07 21:51:53 +11:00
Jesper Juhl
95eff20feb [PATCH] Don't check pointer for NULL before passing it to kfree [arch/powerpc/kernel/rtas_flash.c]
Checking a pointer for NULL before passing it to kfree is pointless, kfree
does its own NULL checking of input.

Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-02-07 21:51:53 +11:00
Olaf Hering
4009d98022 [PATCH] powerpc: fix compile warning in udbg_init_maple_realmode
arch/powerpc/kernel/udbg_16550.c: In function `udbg_init_maple_realmode':
arch/powerpc/kernel/udbg_16550.c:162: warning: assignment from incompatible pointer type

Signed-off-by: Olaf Hering <olh@suse.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-02-07 21:51:52 +11:00
Olaf Hering
d60dcd9450 [PATCH] powerpc: add refcounting to setup_peg2 and of_get_pci_address
setup_peg2 must do some refcounting.
of_get_pci_address may need to drop the node

	Pegasos l2cr : L2 cache was not active, activating
	PCI bus 0 controlled by pci at 80000000
	Badness in kref_get at /home/olaf/kernel/olh/ppc64/linux-2.6.16-rc2-olh/lib/kref.c:32
	Call Trace:
	[C037BD00] [C0007934] show_stack+0x5c/0x184 (unreliable)
	[C037BD30] [C000E068] program_check_exception+0x184/0x584
	[C037BD90] [C000F5F0] ret_from_except_full+0x0/0x4c
	--- Exception: 700 at kref_get+0xc/0x24
	    LR = of_node_get+0x24/0x3c
	[C037BE50] [C004FD94] __pte_alloc_kernel+0x64/0x80 (unreliable)
	[C037BE70] [C000CA18] of_get_parent+0x34/0x58
	[C037BE90] [C0009B18] of_get_address+0x24/0x174
	[C037BED0] [C000A108] of_address_to_resource+0x24/0x68
	[C037BF00] [C038B128] chrp_find_bridges+0x114/0x470
	[C037BF90] [C038AE48] chrp_setup_arch+0x1fc/0x32c
	[C037BFB0] [C03849B0] setup_arch+0x144/0x188
	[C037BFD0] [C037C45C] start_kernel+0x34/0x1a8
	[C037BFF0] [000037A0] 0x37a0
	Badness in kref_get at /home/olaf/kernel/olh/ppc64/linux-2.6.16-rc2-olh/lib/kref.c:32
	Call Trace:
	[C037BC90] [C0007934] show_stack+0x5c/0x184 (unreliable)
	[C037BCC0] [C000E068] program_check_exception+0x184/0x584
	[C037BD20] [C000F5F0] ret_from_except_full+0x0/0x4c
	--- Exception: 700 at kref_get+0xc/0x24
	    LR = of_node_get+0x24/0x3c
	[C037BDE0] [00000000] 0x0 (unreliable)
	[C037BE00] [C000CA18] of_get_parent+0x34/0x58
	[C037BE20] [C0009CE8] of_translate_address+0x2c/0x2fc
	[C037BEA0] [C0009FE8] __of_address_to_resource+0x30/0xc4
	[C037BED0] [C000A130] of_address_to_resource+0x4c/0x68
	[C037BF00] [C038B128] chrp_find_bridges+0x114/0x470
	[C037BF90] [C038AE48] chrp_setup_arch+0x1fc/0x32c
	[C037BFB0] [C03849B0] setup_arch+0x144/0x188
	[C037BFD0] [C037C45C] start_kernel+0x34/0x1a8
	[C037BFF0] [000037A0] 0x37a0
	PCI bus 0 controlled by pci at c0000000
	Top of RAM: 0x10000000, Total RAM: 0x10000000

Signed-off-by: Olaf Hering <olh@suse.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-02-07 21:32:45 +11:00
Olaf Hering
090db7c86d [PATCH] powerpc: remove pointer/integer confusion in of_find_node_by_name
remove pointer/integer confusion

Signed-off-by: Olaf Hering <olh@suse.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-02-07 21:32:44 +11:00
Olaf Hering
d8a8188ded [PATCH] powerpc: remove pointer/integer confusion in generic_calibrate_decr
remove pointer/integer confusion

Signed-off-by: Olaf Hering <olh@suse.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-02-07 21:32:44 +11:00
Michael Ellerman
b68239ee74 [PATCH] powerpc: Don't overwrite flat device tree with kdump kernel
It's possible for prom_init to allocate the flat device tree inside the
kdump crash kernel region. If this happens, when we load the kdump kernel we
overwrite the flattened device tree, which is bad.

We could make prom_init try and avoid allocating inside the crash kernel
region, but then we run into issues if the crash kernel region uses all the
space inside the RMO. The easiest solution is to move the flat device tree
once we're running in the kernel.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-02-07 21:32:44 +11:00
Dave C Boutcher
b4fd884a03 [PATCH] powerpc: remove useless call to touch_softlockup_watchdog
It turns out that we can't stop the watchdog from
triggering here.  If we touch the timer (which just uses the current jiffie
value) before we enable interrupts, it does nothing because jiffies
are not mass-updated until after we enable interrupts.  If we touch the
timer after we enable interrupts, its too late because the softlockup
watchdog will already have triggered.  The touch_softlockup_watchdog
call removed below does nothing.

Signed-off-by: Dave Boutcher <sleddog@us.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-02-07 21:32:44 +11:00
Dave C Boutcher
82a4df7462 [PATCH] powerpc: prod all processors after ibm,suspend-me
We need to prod everyone here since this is the only CPU that is
guaranteed to be running after the ibm,suspend-me RTAS call returns.

Signed-off-by: Dave Boutcher <sleddog@us.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-02-07 21:32:43 +11:00
Dave C Boutcher
c4cb8ecca6 [PATCH] powerpc: return correct rtas status from ibm,suspend-me
Correctly return the status from the RTAS call.  rtas_call expects
to return the status as a return value.

Signed-off-by: Dave Boutcher <sleddog@us.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-02-07 21:32:43 +11:00
Michael Ellerman
31a7f67e58 [PATCH] powerpc: Fix !SMP build of rtas.c
arch/powerpc/kernel/rtas.c is getting hvcall.h via spinlock.h, but when we're
building for UP we don't include spinlock.h.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-02-07 21:28:38 +11:00
Jake Moilanen
a958a26486 [PATCH] powerpc: IOMMU SG paranoia
This addresses two items, which are unlikely to be hit if we
trust drivers.

The first is moving a memory barrier below where the vmerged SG count
is passed back, but before the list is set to end.  If those
instructions were reordered, there could be an issue in iommu_unmap_sg().

The second is making sure we terminate the list on the failure case of
iommu_map_sg().  If a driver does not look at the failure return code,
it could pass a ill-formed SG list to iommu_unmap_sg().

Signed-off-by: Jake Moilanen <moilanen@austin.ibm.com>
Acked-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-02-07 21:28:38 +11:00
Michael Ellerman
cdc3ee8f20 [PATCH] powerpc: Refuse to boot a kdump kernel via OF
You can't boot a kdump kernel via OF, not reliably anyway, the kernel being at
32 MB conflicts with the zImage wrapper etc. and it blows up.

It's trivial to check in prom_init though, and this is early enough that we can
actually drop back to OF where a reset-all will get you going again, which is
kinda nice. I think this should go in for 2.6.16.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-02-07 21:28:38 +11:00
Michael Ellerman
fa93895329 [PATCH] powerpc: Don't allocate zero bytes in finish_device_tree()
In prom.c we run finish_node() on allnodes twice. The first time we just
calculate how much memory we'll need, the second time we do the actual work.

If the calculation stage determines that we need 0 bytes, then we should skip
the lmb allocation. Although an alloc of zero will work, it has been seen to
lead to a BUG_ON() in reserve_bootmem() on at least one machine.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-02-07 21:28:38 +11:00
Paul Mackerras
e2f5a3c1be powerpc/64: Fix bug in setting floating-point exception mode
When loading up the FPU, we were using a 'ld' (load doubleword)
instruction to get the FP exception mode from the thread_struct,
but it's only an int field.  This changes the ld to lwz (load
word and zero-extend).

Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-02-07 13:55:30 +11:00
Heiko Carstens
4a41cdf978 [PATCH] powerpc: Fix sigmask handling in sys_sigsuspend.
Better save the sigmask instead of throwing it away so it can be restored.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-01 08:53:19 -08:00
Olaf Hering
577bca9eff [PATCH] CONFIG_ISA does not make sense for CONFIG_PPC_PSERIES
Older pSeries systems with serial ports dont get any console output after
recent changes.  CONFIG_ISA does not make sense for CONFIG_PPC_PSERIES
because it enables lots of old drivers.  Instead, remove the dependency on
CONFIG_ISA from the serial port discovery code.

Signed-off-by: Olaf Hering <olh@suse.de>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-01 08:53:08 -08:00
David Woodhouse
f27201da5c [PATCH] TIF_RESTORE_SIGMASK support for arch/powerpc
Implement the TIF_RESTORE_SIGMASK flag in the new arch/powerpc kernel, for
both 32-bit and 64-bit system call paths.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-18 19:20:30 -08:00
David Woodhouse
150256d8aa [PATCH] Generic sys_rt_sigsuspend()
The TIF_RESTORE_SIGMASK flag allows us to have a generic implementation of
sys_rt_sigsuspend() instead of duplicating it for each architecture.  This
provides such an implementation and makes arch/powerpc use it.

It also tidies up the ppc32 sys_sigsuspend() to use TIF_RESTORE_SIGMASK.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-18 19:20:29 -08:00
Paul Mackerras
e05b3b4adb powerpc/32: Restore previous version of 32-bit PCI code
When I removed the powermac support from arch/ppc/kernel/pci.c,
I overlooked the fact that that file is used in 32-bit ARCH=powerpc
builds.  To prevent problems in future, restore the original version
of that file as arch/powerpc/kernel/pci_32.c, and use that.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-15 22:05:47 +11:00
Haren Myneni
8385a6a3ac [PATCH] powerpc: Fix kdump copy regs and dynamic allocate per-cpu crash notes
- This contains the arch specific changes for the following the
kdump generic fixes which were already accepted in the upstream.
       .   Capturing CPU registers (for the case of 'panic' and invoking
the dump using 'sysrq-trigger') from a function (stack frame) which will
be not be available during the kdump boot. Hence, might result in
invalid stack trace.
       .   Dynamically allocating per cpu ELF notes section instead of
statically for NR_CPUS.

- Fix the compiler warning in prom_init.c.

Signed-off-by: Haren Myneni <haren@us.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-15 13:14:42 +11:00
Linus Torvalds
3e2b32b693 Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/driver-2.6 2006-01-14 10:42:40 -08:00
Paul Mackerras
d5f079000b [PATCH] powerpc: Recognize /chaos bridge on old pmacs as PCI
The first generation of PCI powermacs had a host bridge called /chaos
which was for all intents and purposes a PCI host bridge, but has a
device_type of "vci" in the device tree (presumably it's not really
PCI at the hardware level or something).

The OF parsing stuff in arch/powerpc/kernel/prom_parse.c currently
doesn't recognize it as a PCI bridge, which means that controlfb.c
can't get its device addresses.

This makes prom_parse.c recognize a device_type of "vci" as indicating
a PCI host bridge.  With this, controlfb works again.

Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-14 15:08:50 +11:00
Dave C Boutcher
91dc182ca6 [PATCH] powerpc: special-case ibm,suspend-me RTAS call
Handle the ibm,suspend-me RTAS call specially.  It needs
to be wrapped in a set of synchronization hypervisor calls
(H_Join).  When the H_Join calls are made on all CPUs, the
intent is that only one will return with H_Continue, meaning
that he is the "last man standing".  That CPU then issues the
ibm,suspend-me call.  What is interesting, of course, is that
the CPU running when the rtas syscall is made, may NOT be the
CPU that ultimately executes the ibm,suspend-me rtas call.

Signed-off-by: Dave Boutcher <sleddog@us.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-14 12:04:25 +11:00
Kumar Gala
7d13d21ae8 [PATCH] powerpc: Add MPC834x SYS board to arch/powerpc
Add the first MPC83xx board that uses a flat device tree to arch/powerpc.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-14 11:13:24 +11:00
Kumar Gala
b8e383d592 [PATCH] powerpc: Allow for ppc_md restart, power_off, and halt to be NULL
On a number of embedded reference boards there isn't always a
way to reset, power_off, or halt the board.  Rather than having
each board implement a spin loop just let the generic code do
it.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-14 11:12:23 +11:00
Andy Whitcroft
7a45fb19ce [PATCH] powerpc: oprofile cpu type names clash with other code
In 2.6.15-git6 a change was commited in the oprofile support in
the powerpc architecture.  It introduced the powerpc_oprofile_type
which contains the define G4.  This causes a name clash with the
existing wacom usb tablet driver.

      CC [M]  drivers/usb/input/wacom.o
    drivers/usb/input/wacom.c:98: error: conflicting types for `G4'
    include/asm/cputable.h:37: error: previous declaration of `G4'
      CC [M]  drivers/usb/mon/mon_text.o
    make[3]: *** [drivers/usb/input/wacom.o] Error 1
    make[2]: *** [drivers/usb/input] Error 2

The elements of an enum declared in global scope are effectivly
global identifiers themselves.  As such we need to ensure the names
are unique.  This patch updates the later oprofile support to use
unique names.

Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-14 11:12:16 +11:00
Paul Mackerras
80f15dc703 powerpc: Provide a suitable AT_PLATFORM value
The glibc folks want to use AT_PLATFORM to select between possible
alternative versions of shared libraries.  This commit makes the kernel
supply an AT_PLATFORM string that indicates what class of processor
we are running on.  Processors with the same set of user-level
instructions and roughly the same instruction scheduling characteristics
are given the same AT_PLATFORM value; for example, 821, 823 and 860
are all reported as "ppc823", and 7447, 7447A, 7448, 7450, 7451, 7455
are all called "ppc7450".

The intention is that the AT_PLATFORM values match the values that
gcc accepts for the -mcpu= option.  For values which are numeric
(e.g. -mcpu=750), "ppc" has been prepended.

This also adds a PPC_FEATURE_BOOKE bit to the AT_HWCAP value and sets
it for the 440 family and the Freescale 85xx family.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-14 10:11:39 +11:00
Russell King
2f53a80fc0 [PATCH] Add vio_bus_type probe and remove methods
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-13 11:26:07 -08:00
Russell King
79f9fb8886 [PATCH] Add of_platform_bus_type probe and remove methods
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-13 11:26:06 -08:00
David Gibson
3356bb9f7b [PATCH] powerpc: Remove lppaca structure from the PACA
At present the lppaca - the structure shared with the iSeries
hypervisor and phyp - is contained within the PACA, our own low-level
per-cpu structure.  This doesn't have to be so, the patch below
removes it, making a separate array of lppaca structures.

This saves approximately 500*NR_CPUS bytes of image size and kernel
memory, because we don't need aligning gap between the Linux and
hypervisor portions of every PACA.  On the other hand it means an
extra level of dereference in many accesses to the lppaca.

The patch also gets rid of several places where we assign the paca
address to a local variable for no particular reason.

Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-13 21:17:39 +11:00
David Gibson
e58c3495e6 [PATCH] powerpc: Cleanup LOADADDR etc. asm macros
This patch consolidates the variety of macros used for loading 32 or
64-bit constants in assembler (LOADADDR, LOADBASE, SET_REG_TO_*).  The
idea is to make the set of macros consistent across 32 and 64 bit and
to make it more obvious which is the appropriate one to use in a given
situation.  The new macros and their semantics are described in the
comments in ppc_asm.h.

In the process, we change several places that were unnecessarily using
immediate loads on ppc64 to use the GOT/TOC.  Likewise we cleanup a
couple of places where we were clumsily subtracting PAGE_OFFSET with
asm instructions to use assemble-time arithmetic or the toreal() macro
instead.

Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-13 21:16:23 +11:00
Dave C Boutcher
ecaa8b0ff3 [PATCH] powerpc: Add of_find_property function
Add an of_find_property function that returns a struct property
given a property name.  Then change the get_property function to
use that routine internally.

Signed-off-by: Dave Boutcher <sleddog@us.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-13 21:11:57 +11:00
Dave C Boutcher
088186ded4 [PATCH] powerpc: Add/remove/update properties in firmware device tree
Add support for updating and removing device tree
properties.  Since we hand out pointers to properties with gay
abandon, we can't just free the property storage.  Instead we
move deleted, or the old copy of an updated property, to a
"dead properties" list.

Also note, its not feasable to kref device tree properties.
we call get_property() all over the kernel in a wild variety
of contexts.

One consequence of this change is that we now take a
read_lock(&devtree_lock) when doing get_property().

Signed-off-by: Dave Boutcher <sleddog@us.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-13 21:02:50 +11:00
Linus Torvalds
45bfe98bd7 Merge git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc-merge
Fix up delete/modify conflict of arch/ppc/kernel/process.c by hand (it's
gone, gone, gone).

Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-12 10:21:22 -08:00
Al Viro
0cec6fd137 [PATCH] powerpc: task_stack_page()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-12 09:08:57 -08:00