commit c4fc1956fa31003bfbe4f597e359d751568e2954 upstream.
Both of these drivers can return NOTIFY_BAD, but this terminates
processing other callbacks that were registered later on the chain.
Since the driver did nothing to log the error it seems wrong to prevent
other interested parties from seeing it. E.g. neither of them had even
bothered to check the type of the error to see if it was a memory error
before the return NOTIFY_BAD.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Acked-by: Aristeu Rozanski <aris@redhat.com>
Acked-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/72937355dd92318d2630979666063f8a2853495b.1461864507.git.tony.luck@intel.com
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Willy Tarreau <w@1wt.eu>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQIcBAABCAAGBQJVoAOcAAoJEDjbvchgkmk+UhcP/1EOwnsJDcZ/sZkkclNgRmrJ
yLBCW65caLAI2E3SmIdKvHQwIx7lHzX5gmWRBrvx+fIl4KhaNKEQ0NCOf1ATaVuQ
MkYMdkicXWpLiFNdKokezryevGS8T1RME+2QlPFv3++Rby1Gy90YD5tu7YlIrEn7
sPRJQHEPCzVAQ7Lqhd66yHICM6/QvdefXj4pjh7vV8IMb2YwnY4vqYt7RxnJCUfP
tqljxrT274kzpA2awzALNh+o3B3/Y4W9ROmlDWviw3JBc9gEqFXYwbDf8KDwA5c0
sp9GPGed/dV5DFuqRcAHksJenFnE3E4gZjo/R5hluHQU27peBuRfXev2hZyBfZqG
796eUOky8fb0OiyxHfT2vhfGeD7CHI/asvIAORjDBVUqzJy9nkkby3XJ0U4tW+pz
VkcilD2oHw1uRIFH3JoBWTJ9W6CYSNFG1qxw+brgfKT5otJG/dBiI8kBABx+aTq7
V+A2cvf11oVwDEb93dnVypMGsfCywqzJUwEIRli9fTFjK7Fg9CBSGX38nwVGUaRv
M2/NeloTyWqUQE41Nd11gCu+hKQRtUU77nxpZcSeKn1XsbpO9/7dHTwcELRuKnTD
9XDksqPznXmC9KXGj7XMcRkLyWyB//JHjay0FCS6b4S6v7R5nrEIRjcpdB+H1WLd
zMOXRH4ZlcOAS/Yt2QMd
=8AB3
-----END PGP SIGNATURE-----
Merge upstream tag 'v3.10.84' into LA.BR.1.3.3
This merge brings us up-to-date as of upstream tag v3.10.84
* tag 'v3.10.84' (317 commits):
Linux 3.10.84
fs: Fix S_NOSEC handling
KVM: x86: make vapics_in_nmi_mode atomic
MIPS: Fix KVM guest fixmap address
x86/PCI: Use host bridge _CRS info on Foxconn K8M890-8237A
powerpc/perf: Fix book3s kernel to userspace backtraces
arm: KVM: force execution of HCPTR access on VM exit
Revert "crypto: talitos - convert to use be16_add_cpu()"
crypto: talitos - avoid memleak in talitos_alg_alloc()
sctp: Fix race between OOTB responce and route removal
packet: avoid out of bounds read in round robin fanout
packet: read num_members once in packet_rcv_fanout()
bridge: fix br_stp_set_bridge_priority race conditions
bridge: fix multicast router rlist endless loop
sparc: Use GFP_ATOMIC in ldc_alloc_exp_dring() as it can be called in softirq context
Linux 3.10.83
bus: mvebu: pass the coherency availability information at init time
KVM: nSVM: Check for NRIPS support before updating control field
ARM: clk-imx6q: refine sata's parent
d_walk() might skip too much
ipv6: update ip6_rt_last_gc every time GC is run
ipv6: prevent fib6_run_gc() contention
xfrm: Increase the garbage collector threshold
Btrfs: make xattr replace operations atomic
x86/microcode/intel: Guard against stack overflow in the loader
fs: take i_mutex during prepare_binprm for set[ug]id executables
hpsa: add missing pci_set_master in kdump path
hpsa: refine the pci enable/disable handling
sb_edac: Fix erroneous bytes->gigabytes conversion
ACPICA: Utilities: Cleanup to remove useless ACPI_PRINTF/FORMAT_xxx helpers.
ACPICA: Utilities: Cleanup to convert physical address printing formats.
__ptrace_may_access() should not deny sub-threads
include/linux/sched.h: don't use task->pid/tgid in same_thread_group/has_group_leader_pid
netfilter: Zero the tuple in nfnl_cthelper_parse_tuple()
netfilter: nfnetlink_cthelper: Remove 'const' and '&' to avoid warnings
config: Enable NEED_DMA_MAP_STATE by default when SWIOTLB is selected
get rid of s_files and files_lock
fput: turn "list_head delayed_fput_list" into llist_head
Linux 3.10.82
lpfc: Add iotag memory barrier
pipe: iovec: Fix memory corruption when retrying atomic copy as non-atomic
drm/mgag200: Reject non-character-cell-aligned mode widths
tracing: Have filter check for balanced ops
crypto: caam - fix RNG buffer cache alignment
Linux 3.10.81
btrfs: cleanup orphans while looking up default subvolume
btrfs: incorrect handling for fiemap_fill_next_extent return
cfg80211: wext: clear sinfo struct before calling driver
mm/memory_hotplug.c: set zone->wait_table to null after freeing it
drm/i915: Fix DDC probe for passive adapters
pata_octeon_cf: fix broken build
ozwpan: unchecked signed subtraction leads to DoS
ozwpan: divide-by-zero leading to panic
ozwpan: Use proper check to prevent heap overflow
MIPS: Fix enabling of DEBUG_STACKOVERFLOW
ring-buffer-benchmark: Fix the wrong sched_priority of producer
USB: serial: ftdi_sio: Add support for a Motion Tracker Development Board
USB: cp210x: add ID for HubZ dual ZigBee and Z-Wave dongle
block: fix ext_dev_lock lockdep report
Input: elantech - fix detection of touchpads where the revision matches a known rate
ALSA: usb-audio: add MAYA44 USB+ mixer control names
ALSA: usb-audio: Add mic volume fix quirk for Logitech Quickcam Fusion
ALSA: hda/realtek - Add a fixup for another Acer Aspire 9420
iio: adis16400: Compute the scan mask from channel indices
iio: adis16400: Use != channel indices for the two voltage channels
iio: adis16400: Report pressure channel scale
xen: netback: read hotplug script once at start of day.
udp: fix behavior of wrong checksums
net_sched: invoke ->attach() after setting dev->qdisc
unix/caif: sk_socket can disappear when state is unlocked
net: dp83640: fix broken calibration routine.
bridge: fix parsing of MLDv2 reports
ipv4: Avoid crashing in ip_error
net: phy: Allow EEE for all RGMII variants
Linux 3.10.80
fs/binfmt_elf.c:load_elf_binary(): return -EINVAL on zero-length mappings
vfs: read file_handle only once in handle_to_path
ACPI / init: Fix the ordering of acpi_reserve_resources()
Input: elantech - fix semi-mt protocol for v3 HW
rtlwifi: rtl8192cu: Fix kernel deadlock
md/raid5: don't record new size if resize_stripes fails.
svcrpc: fix potential GSSX_ACCEPT_SEC_CONTEXT decoding failures
ARM: fix missing syscall trace exit
ARM: dts: imx27: only map 4 Kbyte for fec registers
crypto: s390/ghash - Fix incorrect ghash icv buffer handling.
rt2x00: add new rt2800usb device DWA 130
libata: Ignore spurious PHY event on LPM policy change
libata: Add helper to determine when PHY events should be ignored
ext4: check for zero length extent explicitly
ext4: convert write_begin methods to stable_page_writes semantics
mmc: atmel-mci: fix bad variable type for clkdiv
powerpc: Align TOC to 256 bytes
usb: gadget: configfs: Fix interfaces array NULL-termination
usb-storage: Add NO_WP_DETECT quirk for Lacie 059f:0651 devices
USB: cp210x: add ID for KCF Technologies PRN device
USB: pl2303: Remove support for Samsung I330
USB: visor: Match I330 phone more precisely
xhci: gracefully handle xhci_irq dead device
xhci: Solve full event ring by increasing TRBS_PER_SEGMENT to 256
xhci: fix isoc endpoint dequeue from advancing too far on transaction error
target/pscsi: Don't leak scsi_host if hba is VIRTUAL_HOST
ASoC: wm8994: correct BCLK DIV 348 to 384
ASoC: wm8960: fix "RINPUT3" audio route error
ASoC: mc13783: Fix wrong mask value used in mc13xxx_reg_rmw() calls
ALSA: hda - Add headphone quirk for Lifebook E752
ALSA: hda - Add Conexant codecs CX20721, CX20722, CX20723 and CX20724
d_walk() might skip too much
lib: Fix strnlen_user() to not touch memory after specified maximum
hwmon: (ntc_thermistor) Ensure iio channel is of type IIO_VOLTAGE
libceph: request a new osdmap if lingering request maps to no osd
lguest: fix out-by-one error in address checking.
fs, omfs: add NULL terminator in the end up the token list
KVM: MMU: fix CR4.SMEP=1, CR0.WP=0 with shadow pages
net: socket: Fix the wrong returns for recvmsg and sendmsg
kernel: use the gnu89 standard explicitly
staging, rtl8192e, LLVMLinux: Remove unused inline prototype
staging: rtl8712, rtl8712: avoid lots of build warnings
staging, rtl8192e, LLVMLinux: Change extern inline to static inline
drm/i915: Fix declaration of intel_gmbus_{is_forced_bit/is_port_falid}
staging: wlags49_h2: fix extern inline functions
Linux 3.10.79
ACPICA: Utilities: Cleanup to enforce ACPI_PHYSADDR_TO_PTR()/ACPI_PTR_TO_PHYSADDR().
ACPICA: Tables: Change acpi_find_root_pointer() to use acpi_physical_address.
revert "softirq: Add support for triggering softirq work on softirqs"
sound/oss: fix deadlock in sequencer_ioctl(SNDCTL_SEQ_OUTOFBAND)
mmc: card: Don't access RPMB partitions for normal read/write
pinctrl: Don't just pretend to protect pinctrl_maps, do it for real
drm/i915: Add missing MacBook Pro models with dual channel LVDS
ARM: mvebu: armada-xp-openblocks-ax3-4: Disable internal RTC
ARM: dts: imx23-olinuxino: Fix dr_mode of usb0
ARM: dts: imx28: Fix AUART4 TX-DMA interrupt name
ARM: dts: imx25: Add #pwm-cells to pwm4
gpio: sysfs: fix memory leaks and device hotplug
gpio: unregister gpiochip device before removing it
xen/console: Update console event channel on resume
mm/memory-failure: call shake_page() when error hits thp tail page
nilfs2: fix sanity check of btree level in nilfs_btree_root_broken()
ocfs2: dlm: fix race between purge and get lock resource
Linux 3.10.78
ARC: signal handling robustify
UBI: fix soft lockup in ubi_check_volume()
Drivers: hv: vmbus: Don't wait after requesting offers
ARM: dts: dove: Fix uart[23] reg property
staging: panel: fix lcd type
usb: gadget: printer: enqueue printer's response for setup request
usb: host: oxu210hp: use new USB_RESUME_TIMEOUT
3w-sas: fix command completion race
3w-9xxx: fix command completion race
3w-xxxx: fix command completion race
ext4: fix data corruption caused by unwritten and delayed extents
rbd: end I/O the entire obj_request on error
serial: of-serial: Remove device_type = "serial" registration
ALSA: hda - Fix mute-LED fixed mode
ALSA: emu10k1: Emu10k2 32 bit DMA mode
ALSA: emu10k1: Fix card shortname string buffer overflow
ALSA: emux: Fix mutex deadlock in OSS emulation
ALSA: emux: Fix mutex deadlock at unloading
ipv4: Missing sk_nulls_node_init() in ping_unhash().
Linux 3.10.77
s390: Fix build error
nosave: consolidate __nosave_{begin,end} in <asm/sections.h>
memstick: mspro_block: add missing curly braces
C6x: time: Ensure consistency in __init
wl18xx: show rx_frames_per_rates as an array as it really is
lib: memzero_explicit: use barrier instead of OPTIMIZER_HIDE_VAR
e1000: add dummy allocator to fix race condition between mtu change and netpoll
ksoftirqd: Enable IRQs and call cond_resched() before poking RCU
RCU pathwalk breakage when running into a symlink overmounting something
drm/i915: cope with large i2c transfers
drm/radeon: fix doublescan modes (v2)
i2c: core: Export bus recovery functions
IB/mlx4: Fix WQE LSO segment calculation
IB/core: don't disallow registering region starting at 0x0
IB/core: disallow registering 0-sized memory region
stk1160: Make sure current buffer is released
mvsas: fix panic on expander attached SATA devices
Drivers: hv: vmbus: Fix a bug in the error path in vmbus_open()
xtensa: provide __NR_sync_file_range2 instead of __NR_sync_file_range
xtensa: xtfpga: fix hardware lockup caused by LCD driver
ACPICA: Utilities: split IO address types from data type models.
drivers: parport: Kconfig: exclude arm64 for PARPORT_PC
scsi: storvsc: Fix a bug in copy_from_bounce_buffer()
UBI: fix check for "too many bytes"
UBI: initialize LEB number variable
UBI: fix out of bounds write
UBI: account for bitflips in both the VID header and data
tools/power turbostat: Use $(CURDIR) instead of $(PWD) and add support for O= option in Makefile
powerpc/perf: Cap 64bit userspace backtraces to PERF_MAX_STACK_DEPTH
ext4: make fsync to sync parent dir in no-journal for real this time
arm64: kernel: compiling issue, need delete read_current_timer()
video: vgacon: Don't build on arm64
console: Disable VGA text console support on cris
drivers: parport: Kconfig: exclude h8300 for PARPORT_PC
parport: disable PC-style parallel port support on cris
rtlwifi: rtl8192cu: Add new device ID
rtlwifi: rtl8192cu: Add new USB ID
ptrace: fix race between ptrace_resume() and wait_task_stopped()
fs/binfmt_elf.c: fix bug in loading of PIE binaries
Input: elantech - fix absolute mode setting on some ASUS laptops
ALSA: emu10k1: don't deadlock in proc-functions
usb: core: hub: use new USB_RESUME_TIMEOUT
usb: host: sl811: use new USB_RESUME_TIMEOUT
usb: host: xhci: use new USB_RESUME_TIMEOUT
usb: host: isp116x: use new USB_RESUME_TIMEOUT
usb: host: r8a66597: use new USB_RESUME_TIMEOUT
usb: define a generic USB_RESUME_TIMEOUT macro
usb: phy: Find the right match in devm_usb_phy_match
ARM: S3C64XX: Use fixed IRQ bases to avoid conflicts on Cragganmore
ARM: 8320/1: fix integer overflow in ELF_ET_DYN_BASE
power_supply: lp8788-charger: Fix leaked power supply on probe fail
ring-buffer: Replace this_cpu_*() with __this_cpu_*()
spi: spidev: fix possible arithmetic overflow for multi-transfer message
cdc-wdm: fix endianness bug in debug statements
MIPS: Hibernate: flush TLB entries earlier
KVM: use slowpath for cross page cached accesses
s390/hibernate: fix save and restore of kernel text section
KVM: s390: Zero out current VMDB of STSI before including level3 data.
usb: gadget: composite: enable BESL support
Btrfs: fix inode eviction infinite loop after cloning into it
Btrfs: fix log tree corruption when fs mounted with -o discard
tcp: avoid looping in tcp_send_fin()
tcp: fix possible deadlock in tcp_send_fin()
ip_forward: Drop frames with attached skb->sk
Linux 3.10.76
dcache: Fix locking bugs in backported "deal with deadlock in d_walk()"
arc: mm: Fix build failure
sb_edac: avoid INTERNAL ERROR message in EDAC with unspecified channel
x86: mm: move mmap_sem unlock from mm_fault_error() to caller
vm: make stack guard page errors return VM_FAULT_SIGSEGV rather than SIGBUS
vm: add VM_FAULT_SIGSEGV handling support
deal with deadlock in d_walk()
move d_rcu from overlapping d_child to overlapping d_alias
kconfig: Fix warning "‘jump’ may be used uninitialized"
KVM: x86: SYSENTER emulation is broken
netfilter: conntrack: disable generic tracking for known protocols
Bluetooth: Ignore isochronous endpoints for Intel USB bootloader
Bluetooth: Add support for Intel bootloader devices
Bluetooth: btusb: Add IMC Networks (Broadcom based)
Bluetooth: Add firmware update for Atheros 0cf3:311f
Bluetooth: Enable Atheros 0cf3:311e for firmware upload
mm: Fix NULL pointer dereference in madvise(MADV_WILLNEED) support
splice: Apply generic position and size checks to each write
jfs: fix readdir regression
serial: 8250_dw: Fix deadlock in LCR workaround
benet: Call dev_kfree_skby_any instead of kfree_skb.
ixgb: Call dev_kfree_skby_any instead of dev_kfree_skb.
tg3: Call dev_kfree_skby_any instead of dev_kfree_skb.
bnx2: Call dev_kfree_skby_any instead of dev_kfree_skb.
r8169: Call dev_kfree_skby_any instead of dev_kfree_skb.
8139too: Call dev_kfree_skby_any instead of dev_kfree_skb.
8139cp: Call dev_kfree_skby_any instead of kfree_skb.
tcp: tcp_make_synack() should clear skb->tstamp
tcp: fix FRTO undo on cumulative ACK of SACKed range
ipv6: Don't reduce hop limit for an interface
tcp: prevent fetching dst twice in early demux code
remove extra definitions of U32_MAX
conditionally define U32_MAX
Linux 3.10.75
pagemap: do not leak physical addresses to non-privileged userspace
console: Fix console name size mismatch
IB/mlx4: Saturate RoCE port PMA counters in case of overflow
kernel.h: define u8, s8, u32, etc. limits
net: llc: use correct size for sysctl timeout entries
net: rds: use correct size for max unacked packets and bytes
ipc: fix compat msgrcv with negative msgtyp
core, nfqueue, openvswitch: fix compilation warning
media: s5p-mfc: fix mmap support for 64bit arch
iscsi target: fix oops when adding reject pdu
ocfs2: _really_ sync the right range
be2iscsi: Fix kernel panic when device initialization fails
cifs: fix use-after-free bug in find_writable_file
usb: xhci: apply XHCI_AVOID_BEI quirk to all Intel xHCI controllers
cpuidle: ACPI: do not overwrite name and description of C0
dmaengine: omap-dma: Fix memory leak when terminating running transfer
iio: imu: Use iio_trigger_get for indio_dev->trig assignment
iio: inv_mpu6050: Clear timestamps fifo while resetting hardware fifo
Defer processing of REQ_PREEMPT requests for blocked devices
USB: ftdi_sio: Use jtag quirk for SNAP Connect E10
USB: ftdi_sio: Added custom PID for Synapse Wireless product
radeon: Do not directly dereference pointers to BIOS area.
writeback: fix possible underflow in write bandwidth calculation
writeback: add missing INITIAL_JIFFIES init in global_update_bandwidth()
mm/memory hotplug: postpone the reset of obsolete pgdat
nbd: fix possible memory leak
iwlwifi: dvm: run INIT firmware again upon .start()
IB/uverbs: Prevent integer overflow in ib_umem_get address arithmetic
IB/core: Avoid leakage from kernel to user space
tcp: Fix crash in TCP Fast Open
selinux: fix sel_write_enforce broken return value
ALSA: hda - Fix headphone pin config for Lifebook T731
ALSA: usb - Creative USB X-Fi Pro SB1095 volume knob support
ALSA: hda - Add one more node in the EAPD supporting candidate list
Linux 3.10.74
net: ethernet: pcnet32: Setup the SRAM and NOUFLO on Am79C97{3, 5}
powerpc/mpc85xx: Add ranges to etsec2 nodes
hfsplus: fix B-tree corruption after insertion at position 0
dm: hold suspend_lock while suspending device during device deletion
vt6655: RFbSetPower fix missing rate RATE_12M
perf: Fix irq_work 'tail' recursion
Revert "iwlwifi: mvm: fix failure path when power_update fails in add_interface"
mac80211: drop unencrypted frames in mesh fwding
mac80211: disable u-APSD queues by default
nl80211: ignore HT/VHT capabilities without QoS/WMM
tcm_qla2xxx: Fix incorrect use of __transport_register_session
tcm_fc: missing curly braces in ft_invl_hw_context()
ASoC: wm8955: Fix wrong value references for boolean kctl
ASoC: adav80x: Fix wrong value references for boolean kctl
ASoC: ak4641: Fix wrong value references for boolean kctl
ASoC: wm8904: Fix wrong value references for boolean kctl
ASoC: wm8903: Fix wrong value references for boolean kctl
ASoC: wm2000: Fix wrong value references for boolean kctl
ASoC: wm8731: Fix wrong value references for boolean kctl
ASoC: tas5086: Fix wrong value references for boolean kctl
ASoC: wm8960: Fix wrong value references for boolean kctl
ASoC: cs4271: Fix wrong value references for boolean kctl
ASoC: sgtl5000: remove useless register write clearing CHRGPUMP_POWERUP
Change-Id: Ib7976ee2c7224e39074157e28db4158db40b00db
Signed-off-by: Kaushal Kumar <kaushalk@codeaurora.org>
commit 351fc4a99d49fde63fe5ab7412beb35c40d27269 upstream.
Intel IA32 SDM Table 15-14 defines channel 0xf as 'not specified', but
EDAC doesn't know about this and returns and INTERNAL ERROR when the
channel is greater than NUM_CHANNELS:
kernel: [ 1538.886456] CPU 0: Machine Check Exception: 0 Bank 1: 940000000000009f
kernel: [ 1538.886669] TSC 2bc68b22e7e812 ADDR 46dae7000 MISC 0 PROCESSOR 0:306e4 TIME 1390414572 SOCKET 0 APIC 0
kernel: [ 1538.971948] EDAC MC1: INTERNAL ERROR: channel value is out of range (15 >= 4)
kernel: [ 1538.972203] EDAC MC1: 0 CE memory read error on unknown memory (slot:0 page:0x46dae7 offset:0x0 grain:0 syndrome:0x0 - area:DRAM err_code:0000:009f socket:1 channel_mask:1 rank:0)
This commit changes sb_edac to forward a channel of -1 to EDAC if the
channel is not specified. edac_mc_handle_error() sets the channel to -1
internally after the error message anyway, so this commit should have no
effect other than avoiding the INTERNAL ERROR message when the channel
is not specified.
Signed-off-by: Seth Jennings <sjenning@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Cc: Vinson Lee <vlee@twopensource.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
GENMASK is used to create a contiguous bitmask([hi:lo]). It is
implemented twice in current kernel. One is in EDAC driver, the other
is in SiS/XGI FB driver. Move it to a more generic place for other
usage.
Change-Id: Ia8d2d7c9f6e143fee7338f5bb991658fffef52ec
Signed-off-by: Chen, Gong <gong.chen@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Thomas Winischhofer <thomas@winischhofer.net>
Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Borislav Petkov <bp@suse.de>
Acked-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
[dramasub@codeaurora.org: resolved trivial merge conflicts]
Signed-off-by: Deva Ramasubramanian <dramasub@codeaurora.org>
Git-commit: 10ef6b0dffe404bcc54e94cb2ca1a5b18445a66b
Git-repo: https://github.com/torvalds/linux.git
The Sandy Bridge EDAC driver uses a register in the IMC_DDRIO CSR
space to determine the type of DIMMs (registered or unregistered).
But this device does not exist on some single socket Sandy Bridge
servers. While the type of DIMMs is nice to know, it is not essential
for this driver's other functions. So it seems harsh to have it
refuse to load at all when it cannot find this device.
Make the check for this device be optional. If it isn't present
just report the memory type as "MEM_UNKNOWN".
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.13 (GNU/Linux)
iQEcBAABAgAGBQJRFWw4AAoJEHm+PkMAQRiGnTAH/jBHA2umNc3lc7VkUpusve4q
GGIlNzYh6iuvIGwKQVj9YPsl37qtQnkDUmY8f8WxZjfxiIDw3TkRKDgNLJaM3Jy5
E426/FGlRx/Iia5+4tuBeoVYMoIPnndgW5lEAMRK1SvhTByhIYAXsaM0UwPBetb+
Z5NMdH1f1HVF7RCCmHAkzEk9z78UpdeCzI0t0XuasP2hp2ARAcE1okdO7fNaLiyo
EmenGhRvy9bAsbRwV0rCdl0rQiZXEYM353DWS7n6q4fyVm8MXFwloUxnWCJTzOIL
ZLJaz18adFj7Ip/X6ksnMQiQU2Q3B7aThs5ycv0QGxxL2rDFveYRRQ5ICrXOy3M=
=jjBc
-----END PGP SIGNATURE-----
Merge tag 'v3.8-rc7' into next
Linux 3.8-rc7
* tag 'v3.8-rc7': (12052 commits)
Linux 3.8-rc7
net: sctp: sctp_endpoint_free: zero out secret key data
net: sctp: sctp_setsockopt_auth_key: use kzfree instead of kfree
atm/iphase: rename fregt_t -> ffreg_t
ARM: 7641/1: memory: fix broken mmap by ensuring TASK_UNMAPPED_BASE is aligned
ARM: DMA mapping: fix bad atomic test
ARM: realview: ensure that we have sufficient IRQs available
ARM: GIC: fix GIC cpumask initialization
net: usb: fix regression from FLAG_NOARP code
l2tp: dont play with skb->truesize
net: sctp: sctp_auth_key_put: use kzfree instead of kfree
netback: correct netbk_tx_err to handle wrap around.
xen/netback: free already allocated memory on failure in xen_netbk_get_requests
xen/netback: don't leak pages on failure in xen_netbk_tx_check_gop.
xen/netback: shutdown the ring if it contains garbage.
drm/ttm: fix fence locking in ttm_buffer_object_transfer, 2nd try
virtio_console: Don't access uninitialized data.
net: qmi_wwan: add more Huawei devices, including E320
net: cdc_ncm: add another Huawei vendor specific device
ipv6/ip6_gre: fix error case handling in ip6gre_tunnel_xmit()
...
CONFIG_HOTPLUG is going away as an option. As a result, the __dev*
markings need to be removed.
This change removes the use of __devinit, __devexit_p, and __devexit
from these drivers.
Based on patches originally written by Bill Pemberton, but redone by me
in order to handle some of the coding style issues better, by hand.
Cc: Bill Pemberton <wfp5p@virginia.edu>
Cc: Doug Thompson <dougthompson@xmission.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Mark Gross <mark.gross@intel.com>
Cc: Jason Uhlenkott <juhlenko@akamai.com>
Cc: Mauro Carvalho Chehab <mchehab@redhat.com>
Cc: Tim Small <tim@buttersideup.com>
Cc: Ranganathan Desikan <ravi@jetztechnologies.com>
Cc: "Arvind R." <arvino55@gmail.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: David Daney <david.daney@cavium.com>
Cc: Egor Martovetsky <egor@pasemi.com>
Cc: Olof Johansson <olof@lixom.net>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sandy bridge EDAC is calculating the memory size with overflow.
Basically, the size field and the integer calculation is using 32 bits.
More bits are needed, when the DIMM memories have high density.
The net result is that memories are improperly reported there, when
high-density DIMMs are used:
EDAC DEBUG: in drivers/edac/sb_edac.c, line at 591: mc#0: channel 0, dimm 0, -16384 Mb (-4194304 pages) bank: 8, rank: 2, row: 0x10000, col: 0x800
EDAC DEBUG: in drivers/edac/sb_edac.c, line at 591: mc#0: channel 1, dimm 0, -16384 Mb (-4194304 pages) bank: 8, rank: 2, row: 0x10000, col: 0x800
As the number of pages value is handled at the EDAC core as unsigned
ints, the driver shows the 16 GB memories at sysfs interface as 16760832
MB! The fix is simple: calculate the number of pages as unsigned 64-bits
integer.
After the patch, the memory size (16 GB) is properly detected:
EDAC DEBUG: in drivers/edac/sb_edac.c, line at 592: mc#0: channel 0, dimm 0, 16384 Mb (4194304 pages) bank: 8, rank: 2, row: 0x10000, col: 0x800
EDAC DEBUG: in drivers/edac/sb_edac.c, line at 592: mc#0: channel 1, dimm 0, 16384 Mb (4194304 pages) bank: 8, rank: 2, row: 0x10000, col: 0x800
Cc: stable@kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* devel: (33 commits)
edac i5000, i5400: fix pointer math in i5000_get_mc_regs()
edac: allow specifying the error count with fake_inject
edac: add support for Calxeda highbank L2 cache ecc
edac: add support for Calxeda highbank memory controller
edac: create top-level debugfs directory
sb_edac: properly handle error count
i7core_edac: properly handle error count
edac: edac_mc_handle_error(): add an error_count parameter
edac: remove arch-specific parameter for the error handler
amd64_edac: Don't pass driver name as an error parameter
edac_mc: check for allocation failure in edac_mc_alloc()
edac: Increase version to 3.0.0
edac_mc: Cleanup per-dimm_info debug messages
edac: Convert debugfX to edac_dbg(X,
edac: Use more normal debugging macro style
edac: Don't add __func__ or __FILE__ for debugf[0-9] msgs
Edac: Add ABI Documentation for the new device nodes
edac: move documentation ABI to ABI/testing/sysfs-devices-edac
i7core_edac: change the mem allocation scheme to make Documentation/kobject.txt happy
edac: change the mem allocation scheme to make Documentation/kobject.txt happy
...
Instead of reporting the error count via driver-specific details,
use the new way provided by edac_mc_handle_error.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
In order to avoid loosing error events, it is desirable to group
error events together and generate a single trace for several identical
errors.
The trace API already allows reporting multiple errors. Change the
handle_error function to also allow that.
The changes at the drivers were made by this small script:
$file .=$_ while (<>);
$file =~ s/(edac_mc_handle_error)\s*\(([^\,]+)\,([^\,]+)\,/$1($2,$3, 1,/g;
print $file;
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Remove the arch-dependent parameter, as it were not used,
as the MCE tracepoint weren't implemented. It probably doesn't
make sense to have an MCE-specific tracepoint, as this will
cost more bytes at the tracepoint, and tracepoint is not free.
The changes at the EDAC drivers were done by this small perl script:
$file .=$_ while (<>);
$file =~ s/(edac_mc_handle_error)\s*\(([^\;]+)\,([^\,\)]+)\s*\)/$1($2)/g;
print $file;
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Use a more common debugging style.
Remove __FILE__ uses, add missing newlines,
coalesce formats and align arguments.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The debug macro already adds that. Most of the work here was
made by this small script:
$f .=$_ while (<>);
$f =~ s/(debugf[0-9]\s*\(\s*)__FILE__\s*": /\1"/g;
$f =~ s/(debugf[0-9]\s*\(\s*)__FILE__\s*/\1/g;
$f =~ s/(debugf[0-9]\s*\(\s*)__FILE__\s*"MC: /\1"/g;
$f =~ s/(debugf[0-9]\s*\(\")\%s[\:\,\(\)]*\s*([^\"]*\s*[^\)]+)__func__\s*\,\s*/\1\2/g;
$f =~ s/(debugf[0-9]\s*\(\")\%s[\:\,\(\)]*\s*([^\"]*\s*[^\)]+),\s*__func__\s*\)/\1\2)/g;
$f =~ s/(debugf[0-9]\s*\(\"MC\:\s*)\%s[\:\,\(\)]*\s*([^\"]*\s*[^\)]+)__func__\s*\,\s*/\1\2/g;
$f =~ s/(debugf[0-9]\s*\(\"MC\:\s*)\%s[\:\,\(\)]*\s*([^\"]*\s*[^\)]+),\s*__func__\s*\)/\1\2)/g;
$f =~ s/\"MC\: \\n\"/"MC:\\n"/g;
print $f;
After running the script, manual cleanups were done to fix it the remaining
places.
While here, removed the __LINE__ on most places, as it doesn't actually give
useful info on most places.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
As EDAC doesn't use struct device itself, it created a parent dev
pointer called as "pdev". Now that we'll be converting it to use
struct device, instead of struct devsys, this needs to be fixed.
No functional changes.
Reviewed-by: Aristeu Rozanski <arozansk@redhat.com>
Acked-by: Chris Metcalf <cmetcalf@tilera.com>
Cc: Doug Thompson <norsk5@yahoo.com>
Cc: Borislav Petkov <borislav.petkov@amd.com>
Cc: Mark Gross <mark.gross@intel.com>
Cc: Jason Uhlenkott <juhlenko@akamai.com>
Cc: Tim Small <tim@buttersideup.com>
Cc: Ranganathan Desikan <ravi@jetztechnologies.com>
Cc: "Arvind R." <arvino55@gmail.com>
Cc: Olof Johansson <olof@lixom.net>
Cc: Egor Martovetsky <egor@pasemi.com>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Joe Perches <joe@perches.com>
Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Hitoshi Mitake <h.mitake@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: "Niklas Söderlund" <niklas.soderlund@ericsson.com>
Cc: Shaohui Xie <Shaohui.Xie@freescale.com>
Cc: Josh Boyer <jwboyer@gmail.com>
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
On SandyBridge, DDRIOA(Dev: 17 Func: 0 Offset: 328) is used
to detect whether DIMM is RDIMM/LRDIMM, not TA(Dev: 15 Func: 0).
Signed-off-by: Chen Gong <gong.chen@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Some edac drivers register themselves as mce decoders via
notifier_chain. But in current notifier_chain implementation logic,
it doesn't accept same notifier registered twice. If so, it will be
wrong when adding/removing the element from the list. For example,
on one SandyBridge platform, remove module sb_edac and then trigger
one error, it will hit oops because it has no mce decoder registered
but related notifier_chain still points to an invalid callback
function. Here is an example:
Call Trace:
[<ffffffff8150ef6a>] atomic_notifier_call_chain+0x1a/0x20
[<ffffffff8102b936>] mce_log+0x46/0x180
[<ffffffff8102eaea>] apei_mce_report_mem_error+0x4a/0x60
[<ffffffff812e19d2>] ghes_do_proc+0x192/0x210
[<ffffffff812e2066>] ghes_proc+0x46/0x70
[<ffffffff812e20d8>] ghes_notify_sci+0x48/0x80
[<ffffffff8150ef05>] notifier_call_chain+0x55/0x80
[<ffffffff81076f1a>] __blocking_notifier_call_chain+0x5a/0x80
[<ffffffff812aea11>] ? acpi_os_wait_events_complete+0x23/0x23
[<ffffffff81076f56>] blocking_notifier_call_chain+0x16/0x20
[<ffffffff812ddc4d>] acpi_hed_notify+0x19/0x1b
[<ffffffff812b16bd>] acpi_device_notify+0x19/0x1b
[<ffffffff812beb38>] acpi_ev_notify_dispatch+0x67/0x7f
[<ffffffff812aea3a>] acpi_os_execute_deferred+0x29/0x36
[<ffffffff81069dc2>] process_one_work+0x132/0x450
[<ffffffff8106bbcb>] worker_thread+0x17b/0x3c0
[<ffffffff8106ba50>] ? manage_workers+0x120/0x120
[<ffffffff81070aee>] kthread+0x9e/0xb0
[<ffffffff81514724>] kernel_thread_helper+0x4/0x10
[<ffffffff81070a50>] ? kthread_freezable_should_stop+0x70/0x70
[<ffffffff81514720>] ? gs_change+0x13/0x13
Code: f3 49 89 d4 45 85 ed 4d 89 c6 48 8b 0f 74 48 48 85 c9 75 17 eb 41
0f 1f 80 00 00 00 00 41 83 ed 01 4c 89 f9 74 22 4d 85 ff 74 1d <4c> 8b
79 08 4c 89 e2 48 89 de 48 89 cf ff 11 4d 85 f6 74 04 41
RIP [<ffffffff8150eef6>] notifier_call_chain+0x46/0x80
RSP <ffff88042868fb20>
CR2: ffffffffa01af838
---[ end trace 0100930068e73e6f ]---
BUG: unable to handle kernel paging request at fffffffffffffff8
IP: [<ffffffff810705b0>] kthread_data+0x10/0x20
PGD 1a0d067 PUD 1a0e067 PMD 0
Oops: 0000 [#2] SMP
Only i7core_edac and sb_edac have such issues because they have more
than one memory controller which means they have to register mce
decoder many times.
Cc: <stable@vger.kernel.org> # 3.2 and upper
Signed-off-by: Chen Gong <gong.chen@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Pull EDAC internal API changes from Mauro Carvalho Chehab:
"This changeset is the first part of a series of patches that fixes the
EDAC sybsystem. On this set, it changes the Kernel EDAC API in order
to properly represent the Intel i3/i5/i7, Xeon 3xxx/5xxx/7xxx, and
Intel E5-xxxx memory controllers.
The EDAC core used to assume that:
- the DRAM chip select pin is directly accessed by the memory
controller
- when multiple channels are used, they're all filled with the
same type of memory.
None of the above premises is true on Intel memory controllers since
2002, when RAMBUS and FB-DIMMs were introduced, and Advanced Memory
Buffer or by some similar technologies hides the direct access to the
DRAM pins.
So, the existing drivers for those chipsets had to lie to the EDAC
core, in general telling that just one channel is filled. That
produces some hard to understand error messages like:
EDAC MC0: CE row 3, channel 0, label "DIMM1": 1 Unknown error(s): memory read error on FATAL area : cpu=0 Err=0008:00c2 (ch=2), addr = 0xad1f73480 => socket=0, Channel=0(mask=2), rank=1
The location information there (row3 channel 0) is completely bogus:
it has no physical meaning, and are just some random values that the
driver uses to talk with the EDAC core. The error actually happened
at CPU socket 0, channel 0, slot 1, but this is not reported anywhere,
as the EDAC core doesn't know anything about the memory layout. So,
only advanced users that know how the EDAC driver works and that tests
their systems to see how DIMMs are mapped can actually benefit for
such error logs.
This patch series fixes the error report logic, in order to allow the
EDAC to expose the memory architecture used by them to the EDAC core.
So, as the EDAC core now understands how the memory is organized, it
can provide an useful report:
EDAC MC0: CE memory read error on DIMM1 (channel:0 slot:1 page:0x364b1b offset:0x600 grain:32 syndrome:0x0 - count:1 area:DRAM err_code:0001:0090 socket:0 channel_mask:1 rank:4)
The location of the DIMM where the error happened is reported by "MC0"
(cpu socket #0), at "channel:0 slot:1" location, and matches the
physical location of the DIMM.
There are two remaining issues not covered by this patch series:
- The EDAC sysfs API will still report bogus values. So,
userspace tools like edac-utils will still use the bogus data;
- Add a new tracepoint-based way to get the binary information
about the errors.
Those are on a second series of patches (also at -next), but will
probably miss the train for 3.5, due to the slow review process."
Fix up trivial conflict (due to spelling correction of removed code) in
drivers/edac/edac_device.c
* git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-edac: (42 commits)
i7core: fix ranks information at the per-channel struct
i5000: Fix the fatal error handling
i5100_edac: Fix a warning when compiled with 32 bits
i82975x_edac: Test nr_pages earlier to save a few CPU cycles
e752x_edac: provide more info about how DIMMS/ranks are mapped
i5000_edac: Fix the logic that retrieves memory information
i5400_edac: improve debug messages to better represent the filled memory
edac: Cleanup the logs for i7core and sb edac drivers
edac: Initialize the dimm label with the known information
edac: Remove the legacy EDAC ABI
x38_edac: convert driver to use the new edac ABI
tile_edac: convert driver to use the new edac ABI
sb_edac: convert driver to use the new edac ABI
r82600_edac: convert driver to use the new edac ABI
ppc4xx_edac: convert driver to use the new edac ABI
pasemi_edac: convert driver to use the new edac ABI
mv64x60_edac: convert driver to use the new edac ABI
mpc85xx_edac: convert driver to use the new edac ABI
i82975x_edac: convert driver to use the new edac ABI
i82875p_edac: convert driver to use the new edac ABI
...
Remove some information that it is duplicated at the MCE log,
and don't have much usage for the error. Those data will be
added again, when creating a trace function that outputs both
memory errors and MCE fields.
Cc: Aristeu Rozanski <arozansk@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Now that all drivers got converted to use the new ABI, we can
drop the old one.
Acked-by: Chris Metcalf <cmetcalf@tilera.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The legacy edac ABI is going to be removed. Port the driver to use
and benefit from the new API functionality.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The number of pages is a dimm property. Move it to the dimm struct.
After this change, it is possible to add sysfs nodes for the DIMM's that
will properly represent the DIMM stick properties, including its size.
A TODO fix here is to properly represent dual-rank/quad-rank DIMMs when
the memory controller represents the memory via chip select rows.
Reviewed-by: Aristeu Rozanski <arozansk@redhat.com>
Acked-by: Borislav Petkov <borislav.petkov@amd.com>
Acked-by: Chris Metcalf <cmetcalf@tilera.com>
Cc: Doug Thompson <norsk5@yahoo.com>
Cc: Mark Gross <mark.gross@intel.com>
Cc: Jason Uhlenkott <juhlenko@akamai.com>
Cc: Tim Small <tim@buttersideup.com>
Cc: Ranganathan Desikan <ravi@jetztechnologies.com>
Cc: "Arvind R." <arvino55@gmail.com>
Cc: Olof Johansson <olof@lixom.net>
Cc: Egor Martovetsky <egor@pasemi.com>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Joe Perches <joe@perches.com>
Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Hitoshi Mitake <h.mitake@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: "Niklas Söderlund" <niklas.soderlund@ericsson.com>
Cc: Shaohui Xie <Shaohui.Xie@freescale.com>
Cc: Josh Boyer <jwboyer@gmail.com>
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Almost all edac drivers initialize csrow_info->first_page,
csrow_info->last_page and csrow_info->page_mask. Those vars are
used inside the EDAC core, in order to calculate the csrow affected
by an error, by using the routine edac_mc_find_csrow_by_page().
However, very few drivers actually use it:
e752x_edac.c
e7xxx_edac.c
i3000_edac.c
i82443bxgx_edac.c
i82860_edac.c
i82875p_edac.c
i82975x_edac.c
r82600_edac.c
There also a few other drivers that have their own calculus
formula internally using those vars.
All the others are just wasting time by initializing those
data.
While initializing data without using them won't cause any troubles, as
those information is stored at the wrong place (at csrows structure), it
is better to remove what is unused, in order to simplify the next patch.
Reviewed-by: Aristeu Rozanski <arozansk@redhat.com>
Acked-by: Borislav Petkov <borislav.petkov@amd.com>
Acked-by: Chris Metcalf <cmetcalf@tilera.com>
Cc: Doug Thompson <norsk5@yahoo.com>
Cc: Hitoshi Mitake <h.mitake@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: "Niklas Söderlund" <niklas.soderlund@ericsson.com>
Cc: Josh Boyer <jwboyer@gmail.com>
Cc: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
On systems based on chip select rows, all channels need to use memories
with the same properties, otherwise the memories on channels A and B
won't be recognized.
However, such assumption is not true for all types of memory
controllers.
Controllers for FB-DIMM's don't have such requirements.
Also, modern Intel controllers seem to be capable of handling such
differences.
So, we need to get rid of storing the DIMM information into a per-csrow
data, storing it, instead at the right place.
The first step is to move grain, mtype, dtype and edac_mode to the
per-dimm struct.
Reviewed-by: Aristeu Rozanski <arozansk@redhat.com>
Reviewed-by: Borislav Petkov <borislav.petkov@amd.com>
Acked-by: Chris Metcalf <cmetcalf@tilera.com>
Cc: Doug Thompson <norsk5@yahoo.com>
Cc: Borislav Petkov <borislav.petkov@amd.com>
Cc: Mark Gross <mark.gross@intel.com>
Cc: Jason Uhlenkott <juhlenko@akamai.com>
Cc: Tim Small <tim@buttersideup.com>
Cc: Ranganathan Desikan <ravi@jetztechnologies.com>
Cc: "Arvind R." <arvino55@gmail.com>
Cc: Olof Johansson <olof@lixom.net>
Cc: Egor Martovetsky <egor@pasemi.com>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Joe Perches <joe@perches.com>
Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Hitoshi Mitake <h.mitake@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: James Bottomley <James.Bottomley@parallels.com>
Cc: "Niklas Söderlund" <niklas.soderlund@ericsson.com>
Cc: Shaohui Xie <Shaohui.Xie@freescale.com>
Cc: Josh Boyer <jwboyer@gmail.com>
Cc: Mike Williams <mike@mikebwilliams.com>
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The way a DIMM is currently represented implies that they're
linked into a per-csrow struct. However, some drivers don't see
csrows, as they're ridden behind some chip like the AMB's
on FBDIMM's, for example.
This forced drivers to fake^Wvirtualize a csrow struct, and to create
a mess under csrow/channel original's concept.
Move the DIMM labels into a per-DIMM struct, and add there
the real location of the socket, in terms of csrow/channel.
Latter patches will modify the location to properly represent the
memory architecture.
All other drivers will use a per-csrow type of location.
Some of those drivers will require a latter conversion, as
they also fake the csrows internally.
TODO: While this patch doesn't change the existing behavior, on
csrows-based memory controllers, a csrow/channel pair points to a memory
rank. There's a known bug at the EDAC core that allows having different
labels for the same DIMM, if it has more than one rank. A latter patch
is need to merge the several ranks for a DIMM into the same dimm_info
struct, in order to avoid having different labels for the same DIMM.
The edac_mc_alloc() will now contain a per-dimm initialization loop that
will be changed by latter patches in order to match other types of
memory architectures.
Reviewed-by: Aristeu Rozanski <arozansk@redhat.com>
Reviewed-by: Borislav Petkov <borislav.petkov@amd.com>
Cc: Doug Thompson <norsk5@yahoo.com>
Cc: Ranganathan Desikan <ravi@jetztechnologies.com>
Cc: "Arvind R." <arvino55@gmail.com>
Cc: "Niklas Söderlund" <niklas.soderlund@ericsson.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Pull EDAC fixes from Mauro Carvalho Chehab:
"A series of EDAC driver fixes. It also has one core fix at the
documentation, and a rename patch, fixing the name of the struct that
contains the rank information."
* 'linux_next' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-edac:
edac: rename channel_info to rank_info
i5400_edac: Avoid calling pci_put_device() twice
edac: i5100 ack error detection register after each read
edac: i5100 fix erroneous define for M1Err
edac: sb_edac: Fix a wrong value setting for the previous value
edac: sb_edac: Fix a INTERLEAVE_MODE() misuse
edac: sb_edac: Let the driver depend on PCI_MMCONFIG
edac: Improve the comments to better describe the memory concepts
edac/ppc4xx_edac: Fix compilation
Fix sb_edac compilation with 32 bits kernels
>From the driver design, the variable limit wants to compare with its
previous value, we should set the value of limit instead of the value
of tmp_mb to the variable prev.
Signed-off-by: Hui Wang <jason77.wang@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
We can identify dram interleave mode from the Dram Rule register
rather than Dram Interleave list register.
In this context, the reg of INTERLEAVE_MODE(reg) contains the Dram
Interleave list register, we can't get interleave mode from the reg,
while the variable interleave_mode saves the the mode got from the
Dram Rule register, so we use the variable to replace
INTERLEAVE_MDDE(reg) here.
Signed-off-by: Hui Wang <jason77.wang@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
These const tables are currently marked __devinitdata, but
Documentation/PCI/pci.txt says:
"o The ID table array should be marked __devinitconst; this is done
automatically if the table is declared with DEFINE_PCI_DEVICE_TABLE()."
So use DEFINE_PCI_DEVICE_TABLE(x).
Based on PaX and earlier work by Andi Kleen.
Signed-off-by: Lionel Debroux <lionel_debroux@yahoo.fr>
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
Several fields in struct cpuinfo_x86 were not defined for the
!SMP case, likely to save space. However, those fields still
have some meaning for UP, and keeping them allows some #ifdef
removal from other files. The additional size of the UP kernel
from this change is not significant enough to worry about
keeping up the distinction:
text data bss dec hex filename
4737168 506459 972040 6215667 5ed7f3 vmlinux.o.before
4737444 506459 972040 6215943 5ed907 vmlinux.o.after
for a difference of 276 bytes for an example UP config.
If someone wants those 276 bytes back badly then it should
be implemented in a cleaner way.
Signed-off-by: Kevin Winchester <kjwinchester@gmail.com>
Cc: Steffen Persvold <sp@numascale.com>
Link: http://lkml.kernel.org/r/1324428742-12498-1-git-send-email-kjwinchester@gmail.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
No functionality change, this is done so that in a follow-on patch all
queued-up MCEs can be decoded after registering on the chain.
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
The edac driver for Sandy Bridge was found to be reporting "FPM"
for edac_mode, which clearly doesn't make sense. It was found that
sb_edac.c:get_dimm_config was reusing a variable for both mem_type
and edac_type, and thus was overwriting the value after setting
it correctly. This patch fixes that issue.
Before the patch:
/sys/devices/system/edac/mc/mc0/csrow0/edac_mode:FPM
/sys/devices/system/edac/mc/mc0/csrow1/edac_mode:FPM
/sys/devices/system/edac/mc/mc0/csrow2/edac_mode:FPM
/sys/devices/system/edac/mc/mc0/csrow3/edac_mode:FPM
After:
/sys/devices/system/edac/mc/mc0/csrow0/edac_mode:S4ECD4ED
/sys/devices/system/edac/mc/mc0/csrow1/edac_mode:S4ECD4ED
/sys/devices/system/edac/mc/mc0/csrow2/edac_mode:S4ECD4ED
/sys/devices/system/edac/mc/mc0/csrow3/edac_mode:S4ECD4ED
Signed-off-by: Mark A. Grondona <mgrondona@llnl.gov>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Some changes on it were required due to changeset cd90cc84c6bf0, that
changed the glue with the MCE logic.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
This driver is known to work on mine and Tony's test environments,
using software error injection, and a partial hardware/software
error injection tool.
There's no broader range test yet to double check if the error decoding
logic will actually point to the right DIMM, so use it with care.
More tests are required to be sure that the driver will work on all
different types of memory configurations.
If you're willing to risk using it, I suggest you to enable EDAC debugs
for your test machines, as the debug logs helps to track what's going
inside the driver.
Please feed me with bug reports, if you notice that the driver
is miss-behaving.
Tested-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Luca Stefani
Tony Luck
Kaushal Kumar
Jim Snow
Seth Jennings
Chen, Gong
Mauro Carvalho Chehab
Greg Kroah-Hartman
Joe Perches
Linus Torvalds
David Mackey
Hui Wang
Lionel Debroux
Kevin Winchester
Borislav Petkov
Mark A. Grondona