Commit 8520f38099 ("USB: change hub initialization sleeps to
delayed_work") changed the hub_activate() routine to make part of it
run in a workqueue. However, the commit failed to take a reference to
the usb_hub structure or to lock the hub interface while doing so. As
a result, if a hub is plugged in and quickly unplugged before the work
routine can run, the routine will try to access memory that has been
deallocated. Or, if the hub is unplugged while the routine is
running, the memory may be deallocated while it is in active use.
This patch fixes the problem by taking a reference to the usb_hub at
the start of hub_activate() and releasing it at the end (when the work
is finished), and by locking the hub interface while the work routine
is running. It also adds a check at the start of the routine to see
if the hub has already been disconnected, in which nothing should be
done.
Change-Id: I1e5a67d22a5b61898e5a2aab8ea87b0c08e1130c
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reported-by: Alexandru Cornea <alexandru.cornea@intel.com>
Tested-by: Alexandru Cornea <alexandru.cornea@intel.com>
Fixes: 8520f38099 ("USB: change hub initialization sleeps to delayed_work")
CC: <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Git-commit: e50293ef9775c5f1cf3fcc093037dd6a8c5684ea
Git-repo: https://git.kernel.org/cgit/linux/kernel/git/stable/linux-stable.git
Signed-off-by: Ravi Kumar Siddojigari <rsiddoji@codeaurora.org>
commit 264904ccc33c604d4b3141bbd33808152dfac45b upstream.
Some devices I got show an inability to operate right after
power on if they are already connected. They are beyond recovery
if the descriptors are requested multiple times. So in case of
a timeout we rather bail early and reset again. But it must be
done only on the first loop lest we get into a reset/time out
spiral that can be overcome with a retry.
This patch is a rework of a patch that fell through the cracks.
http://www.spinics.net/lists/linux-usb/msg103263.html
Signed-off-by: Oliver Neukum <oneukum@suse.com>
CC: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
commit ad87e03213b552a5c33d5e1e7a19a73768397010 upstream.
Some USB device / host controller combinations seem to have problems
with Link Power Management. For example, Steinar found that his xHCI
controller wouldn't handle bandwidth calculations correctly for two
video cards simultaneously when LPM was enabled, even though the bus
had plenty of bandwidth available.
This patch introduces a new quirk flag for devices that should remain
disabled for LPM, and creates quirk entries for Steinar's devices.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reported-by: Steinar H. Gunderson <sgunderson@bigfoot.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=8AB3
-----END PGP SIGNATURE-----
Merge upstream tag 'v3.10.84' into LA.BR.1.3.3
This merge brings us up-to-date as of upstream tag v3.10.84
* tag 'v3.10.84' (317 commits):
Linux 3.10.84
fs: Fix S_NOSEC handling
KVM: x86: make vapics_in_nmi_mode atomic
MIPS: Fix KVM guest fixmap address
x86/PCI: Use host bridge _CRS info on Foxconn K8M890-8237A
powerpc/perf: Fix book3s kernel to userspace backtraces
arm: KVM: force execution of HCPTR access on VM exit
Revert "crypto: talitos - convert to use be16_add_cpu()"
crypto: talitos - avoid memleak in talitos_alg_alloc()
sctp: Fix race between OOTB responce and route removal
packet: avoid out of bounds read in round robin fanout
packet: read num_members once in packet_rcv_fanout()
bridge: fix br_stp_set_bridge_priority race conditions
bridge: fix multicast router rlist endless loop
sparc: Use GFP_ATOMIC in ldc_alloc_exp_dring() as it can be called in softirq context
Linux 3.10.83
bus: mvebu: pass the coherency availability information at init time
KVM: nSVM: Check for NRIPS support before updating control field
ARM: clk-imx6q: refine sata's parent
d_walk() might skip too much
ipv6: update ip6_rt_last_gc every time GC is run
ipv6: prevent fib6_run_gc() contention
xfrm: Increase the garbage collector threshold
Btrfs: make xattr replace operations atomic
x86/microcode/intel: Guard against stack overflow in the loader
fs: take i_mutex during prepare_binprm for set[ug]id executables
hpsa: add missing pci_set_master in kdump path
hpsa: refine the pci enable/disable handling
sb_edac: Fix erroneous bytes->gigabytes conversion
ACPICA: Utilities: Cleanup to remove useless ACPI_PRINTF/FORMAT_xxx helpers.
ACPICA: Utilities: Cleanup to convert physical address printing formats.
__ptrace_may_access() should not deny sub-threads
include/linux/sched.h: don't use task->pid/tgid in same_thread_group/has_group_leader_pid
netfilter: Zero the tuple in nfnl_cthelper_parse_tuple()
netfilter: nfnetlink_cthelper: Remove 'const' and '&' to avoid warnings
config: Enable NEED_DMA_MAP_STATE by default when SWIOTLB is selected
get rid of s_files and files_lock
fput: turn "list_head delayed_fput_list" into llist_head
Linux 3.10.82
lpfc: Add iotag memory barrier
pipe: iovec: Fix memory corruption when retrying atomic copy as non-atomic
drm/mgag200: Reject non-character-cell-aligned mode widths
tracing: Have filter check for balanced ops
crypto: caam - fix RNG buffer cache alignment
Linux 3.10.81
btrfs: cleanup orphans while looking up default subvolume
btrfs: incorrect handling for fiemap_fill_next_extent return
cfg80211: wext: clear sinfo struct before calling driver
mm/memory_hotplug.c: set zone->wait_table to null after freeing it
drm/i915: Fix DDC probe for passive adapters
pata_octeon_cf: fix broken build
ozwpan: unchecked signed subtraction leads to DoS
ozwpan: divide-by-zero leading to panic
ozwpan: Use proper check to prevent heap overflow
MIPS: Fix enabling of DEBUG_STACKOVERFLOW
ring-buffer-benchmark: Fix the wrong sched_priority of producer
USB: serial: ftdi_sio: Add support for a Motion Tracker Development Board
USB: cp210x: add ID for HubZ dual ZigBee and Z-Wave dongle
block: fix ext_dev_lock lockdep report
Input: elantech - fix detection of touchpads where the revision matches a known rate
ALSA: usb-audio: add MAYA44 USB+ mixer control names
ALSA: usb-audio: Add mic volume fix quirk for Logitech Quickcam Fusion
ALSA: hda/realtek - Add a fixup for another Acer Aspire 9420
iio: adis16400: Compute the scan mask from channel indices
iio: adis16400: Use != channel indices for the two voltage channels
iio: adis16400: Report pressure channel scale
xen: netback: read hotplug script once at start of day.
udp: fix behavior of wrong checksums
net_sched: invoke ->attach() after setting dev->qdisc
unix/caif: sk_socket can disappear when state is unlocked
net: dp83640: fix broken calibration routine.
bridge: fix parsing of MLDv2 reports
ipv4: Avoid crashing in ip_error
net: phy: Allow EEE for all RGMII variants
Linux 3.10.80
fs/binfmt_elf.c:load_elf_binary(): return -EINVAL on zero-length mappings
vfs: read file_handle only once in handle_to_path
ACPI / init: Fix the ordering of acpi_reserve_resources()
Input: elantech - fix semi-mt protocol for v3 HW
rtlwifi: rtl8192cu: Fix kernel deadlock
md/raid5: don't record new size if resize_stripes fails.
svcrpc: fix potential GSSX_ACCEPT_SEC_CONTEXT decoding failures
ARM: fix missing syscall trace exit
ARM: dts: imx27: only map 4 Kbyte for fec registers
crypto: s390/ghash - Fix incorrect ghash icv buffer handling.
rt2x00: add new rt2800usb device DWA 130
libata: Ignore spurious PHY event on LPM policy change
libata: Add helper to determine when PHY events should be ignored
ext4: check for zero length extent explicitly
ext4: convert write_begin methods to stable_page_writes semantics
mmc: atmel-mci: fix bad variable type for clkdiv
powerpc: Align TOC to 256 bytes
usb: gadget: configfs: Fix interfaces array NULL-termination
usb-storage: Add NO_WP_DETECT quirk for Lacie 059f:0651 devices
USB: cp210x: add ID for KCF Technologies PRN device
USB: pl2303: Remove support for Samsung I330
USB: visor: Match I330 phone more precisely
xhci: gracefully handle xhci_irq dead device
xhci: Solve full event ring by increasing TRBS_PER_SEGMENT to 256
xhci: fix isoc endpoint dequeue from advancing too far on transaction error
target/pscsi: Don't leak scsi_host if hba is VIRTUAL_HOST
ASoC: wm8994: correct BCLK DIV 348 to 384
ASoC: wm8960: fix "RINPUT3" audio route error
ASoC: mc13783: Fix wrong mask value used in mc13xxx_reg_rmw() calls
ALSA: hda - Add headphone quirk for Lifebook E752
ALSA: hda - Add Conexant codecs CX20721, CX20722, CX20723 and CX20724
d_walk() might skip too much
lib: Fix strnlen_user() to not touch memory after specified maximum
hwmon: (ntc_thermistor) Ensure iio channel is of type IIO_VOLTAGE
libceph: request a new osdmap if lingering request maps to no osd
lguest: fix out-by-one error in address checking.
fs, omfs: add NULL terminator in the end up the token list
KVM: MMU: fix CR4.SMEP=1, CR0.WP=0 with shadow pages
net: socket: Fix the wrong returns for recvmsg and sendmsg
kernel: use the gnu89 standard explicitly
staging, rtl8192e, LLVMLinux: Remove unused inline prototype
staging: rtl8712, rtl8712: avoid lots of build warnings
staging, rtl8192e, LLVMLinux: Change extern inline to static inline
drm/i915: Fix declaration of intel_gmbus_{is_forced_bit/is_port_falid}
staging: wlags49_h2: fix extern inline functions
Linux 3.10.79
ACPICA: Utilities: Cleanup to enforce ACPI_PHYSADDR_TO_PTR()/ACPI_PTR_TO_PHYSADDR().
ACPICA: Tables: Change acpi_find_root_pointer() to use acpi_physical_address.
revert "softirq: Add support for triggering softirq work on softirqs"
sound/oss: fix deadlock in sequencer_ioctl(SNDCTL_SEQ_OUTOFBAND)
mmc: card: Don't access RPMB partitions for normal read/write
pinctrl: Don't just pretend to protect pinctrl_maps, do it for real
drm/i915: Add missing MacBook Pro models with dual channel LVDS
ARM: mvebu: armada-xp-openblocks-ax3-4: Disable internal RTC
ARM: dts: imx23-olinuxino: Fix dr_mode of usb0
ARM: dts: imx28: Fix AUART4 TX-DMA interrupt name
ARM: dts: imx25: Add #pwm-cells to pwm4
gpio: sysfs: fix memory leaks and device hotplug
gpio: unregister gpiochip device before removing it
xen/console: Update console event channel on resume
mm/memory-failure: call shake_page() when error hits thp tail page
nilfs2: fix sanity check of btree level in nilfs_btree_root_broken()
ocfs2: dlm: fix race between purge and get lock resource
Linux 3.10.78
ARC: signal handling robustify
UBI: fix soft lockup in ubi_check_volume()
Drivers: hv: vmbus: Don't wait after requesting offers
ARM: dts: dove: Fix uart[23] reg property
staging: panel: fix lcd type
usb: gadget: printer: enqueue printer's response for setup request
usb: host: oxu210hp: use new USB_RESUME_TIMEOUT
3w-sas: fix command completion race
3w-9xxx: fix command completion race
3w-xxxx: fix command completion race
ext4: fix data corruption caused by unwritten and delayed extents
rbd: end I/O the entire obj_request on error
serial: of-serial: Remove device_type = "serial" registration
ALSA: hda - Fix mute-LED fixed mode
ALSA: emu10k1: Emu10k2 32 bit DMA mode
ALSA: emu10k1: Fix card shortname string buffer overflow
ALSA: emux: Fix mutex deadlock in OSS emulation
ALSA: emux: Fix mutex deadlock at unloading
ipv4: Missing sk_nulls_node_init() in ping_unhash().
Linux 3.10.77
s390: Fix build error
nosave: consolidate __nosave_{begin,end} in <asm/sections.h>
memstick: mspro_block: add missing curly braces
C6x: time: Ensure consistency in __init
wl18xx: show rx_frames_per_rates as an array as it really is
lib: memzero_explicit: use barrier instead of OPTIMIZER_HIDE_VAR
e1000: add dummy allocator to fix race condition between mtu change and netpoll
ksoftirqd: Enable IRQs and call cond_resched() before poking RCU
RCU pathwalk breakage when running into a symlink overmounting something
drm/i915: cope with large i2c transfers
drm/radeon: fix doublescan modes (v2)
i2c: core: Export bus recovery functions
IB/mlx4: Fix WQE LSO segment calculation
IB/core: don't disallow registering region starting at 0x0
IB/core: disallow registering 0-sized memory region
stk1160: Make sure current buffer is released
mvsas: fix panic on expander attached SATA devices
Drivers: hv: vmbus: Fix a bug in the error path in vmbus_open()
xtensa: provide __NR_sync_file_range2 instead of __NR_sync_file_range
xtensa: xtfpga: fix hardware lockup caused by LCD driver
ACPICA: Utilities: split IO address types from data type models.
drivers: parport: Kconfig: exclude arm64 for PARPORT_PC
scsi: storvsc: Fix a bug in copy_from_bounce_buffer()
UBI: fix check for "too many bytes"
UBI: initialize LEB number variable
UBI: fix out of bounds write
UBI: account for bitflips in both the VID header and data
tools/power turbostat: Use $(CURDIR) instead of $(PWD) and add support for O= option in Makefile
powerpc/perf: Cap 64bit userspace backtraces to PERF_MAX_STACK_DEPTH
ext4: make fsync to sync parent dir in no-journal for real this time
arm64: kernel: compiling issue, need delete read_current_timer()
video: vgacon: Don't build on arm64
console: Disable VGA text console support on cris
drivers: parport: Kconfig: exclude h8300 for PARPORT_PC
parport: disable PC-style parallel port support on cris
rtlwifi: rtl8192cu: Add new device ID
rtlwifi: rtl8192cu: Add new USB ID
ptrace: fix race between ptrace_resume() and wait_task_stopped()
fs/binfmt_elf.c: fix bug in loading of PIE binaries
Input: elantech - fix absolute mode setting on some ASUS laptops
ALSA: emu10k1: don't deadlock in proc-functions
usb: core: hub: use new USB_RESUME_TIMEOUT
usb: host: sl811: use new USB_RESUME_TIMEOUT
usb: host: xhci: use new USB_RESUME_TIMEOUT
usb: host: isp116x: use new USB_RESUME_TIMEOUT
usb: host: r8a66597: use new USB_RESUME_TIMEOUT
usb: define a generic USB_RESUME_TIMEOUT macro
usb: phy: Find the right match in devm_usb_phy_match
ARM: S3C64XX: Use fixed IRQ bases to avoid conflicts on Cragganmore
ARM: 8320/1: fix integer overflow in ELF_ET_DYN_BASE
power_supply: lp8788-charger: Fix leaked power supply on probe fail
ring-buffer: Replace this_cpu_*() with __this_cpu_*()
spi: spidev: fix possible arithmetic overflow for multi-transfer message
cdc-wdm: fix endianness bug in debug statements
MIPS: Hibernate: flush TLB entries earlier
KVM: use slowpath for cross page cached accesses
s390/hibernate: fix save and restore of kernel text section
KVM: s390: Zero out current VMDB of STSI before including level3 data.
usb: gadget: composite: enable BESL support
Btrfs: fix inode eviction infinite loop after cloning into it
Btrfs: fix log tree corruption when fs mounted with -o discard
tcp: avoid looping in tcp_send_fin()
tcp: fix possible deadlock in tcp_send_fin()
ip_forward: Drop frames with attached skb->sk
Linux 3.10.76
dcache: Fix locking bugs in backported "deal with deadlock in d_walk()"
arc: mm: Fix build failure
sb_edac: avoid INTERNAL ERROR message in EDAC with unspecified channel
x86: mm: move mmap_sem unlock from mm_fault_error() to caller
vm: make stack guard page errors return VM_FAULT_SIGSEGV rather than SIGBUS
vm: add VM_FAULT_SIGSEGV handling support
deal with deadlock in d_walk()
move d_rcu from overlapping d_child to overlapping d_alias
kconfig: Fix warning "‘jump’ may be used uninitialized"
KVM: x86: SYSENTER emulation is broken
netfilter: conntrack: disable generic tracking for known protocols
Bluetooth: Ignore isochronous endpoints for Intel USB bootloader
Bluetooth: Add support for Intel bootloader devices
Bluetooth: btusb: Add IMC Networks (Broadcom based)
Bluetooth: Add firmware update for Atheros 0cf3:311f
Bluetooth: Enable Atheros 0cf3:311e for firmware upload
mm: Fix NULL pointer dereference in madvise(MADV_WILLNEED) support
splice: Apply generic position and size checks to each write
jfs: fix readdir regression
serial: 8250_dw: Fix deadlock in LCR workaround
benet: Call dev_kfree_skby_any instead of kfree_skb.
ixgb: Call dev_kfree_skby_any instead of dev_kfree_skb.
tg3: Call dev_kfree_skby_any instead of dev_kfree_skb.
bnx2: Call dev_kfree_skby_any instead of dev_kfree_skb.
r8169: Call dev_kfree_skby_any instead of dev_kfree_skb.
8139too: Call dev_kfree_skby_any instead of dev_kfree_skb.
8139cp: Call dev_kfree_skby_any instead of kfree_skb.
tcp: tcp_make_synack() should clear skb->tstamp
tcp: fix FRTO undo on cumulative ACK of SACKed range
ipv6: Don't reduce hop limit for an interface
tcp: prevent fetching dst twice in early demux code
remove extra definitions of U32_MAX
conditionally define U32_MAX
Linux 3.10.75
pagemap: do not leak physical addresses to non-privileged userspace
console: Fix console name size mismatch
IB/mlx4: Saturate RoCE port PMA counters in case of overflow
kernel.h: define u8, s8, u32, etc. limits
net: llc: use correct size for sysctl timeout entries
net: rds: use correct size for max unacked packets and bytes
ipc: fix compat msgrcv with negative msgtyp
core, nfqueue, openvswitch: fix compilation warning
media: s5p-mfc: fix mmap support for 64bit arch
iscsi target: fix oops when adding reject pdu
ocfs2: _really_ sync the right range
be2iscsi: Fix kernel panic when device initialization fails
cifs: fix use-after-free bug in find_writable_file
usb: xhci: apply XHCI_AVOID_BEI quirk to all Intel xHCI controllers
cpuidle: ACPI: do not overwrite name and description of C0
dmaengine: omap-dma: Fix memory leak when terminating running transfer
iio: imu: Use iio_trigger_get for indio_dev->trig assignment
iio: inv_mpu6050: Clear timestamps fifo while resetting hardware fifo
Defer processing of REQ_PREEMPT requests for blocked devices
USB: ftdi_sio: Use jtag quirk for SNAP Connect E10
USB: ftdi_sio: Added custom PID for Synapse Wireless product
radeon: Do not directly dereference pointers to BIOS area.
writeback: fix possible underflow in write bandwidth calculation
writeback: add missing INITIAL_JIFFIES init in global_update_bandwidth()
mm/memory hotplug: postpone the reset of obsolete pgdat
nbd: fix possible memory leak
iwlwifi: dvm: run INIT firmware again upon .start()
IB/uverbs: Prevent integer overflow in ib_umem_get address arithmetic
IB/core: Avoid leakage from kernel to user space
tcp: Fix crash in TCP Fast Open
selinux: fix sel_write_enforce broken return value
ALSA: hda - Fix headphone pin config for Lifebook T731
ALSA: usb - Creative USB X-Fi Pro SB1095 volume knob support
ALSA: hda - Add one more node in the EAPD supporting candidate list
Linux 3.10.74
net: ethernet: pcnet32: Setup the SRAM and NOUFLO on Am79C97{3, 5}
powerpc/mpc85xx: Add ranges to etsec2 nodes
hfsplus: fix B-tree corruption after insertion at position 0
dm: hold suspend_lock while suspending device during device deletion
vt6655: RFbSetPower fix missing rate RATE_12M
perf: Fix irq_work 'tail' recursion
Revert "iwlwifi: mvm: fix failure path when power_update fails in add_interface"
mac80211: drop unencrypted frames in mesh fwding
mac80211: disable u-APSD queues by default
nl80211: ignore HT/VHT capabilities without QoS/WMM
tcm_qla2xxx: Fix incorrect use of __transport_register_session
tcm_fc: missing curly braces in ft_invl_hw_context()
ASoC: wm8955: Fix wrong value references for boolean kctl
ASoC: adav80x: Fix wrong value references for boolean kctl
ASoC: ak4641: Fix wrong value references for boolean kctl
ASoC: wm8904: Fix wrong value references for boolean kctl
ASoC: wm8903: Fix wrong value references for boolean kctl
ASoC: wm2000: Fix wrong value references for boolean kctl
ASoC: wm8731: Fix wrong value references for boolean kctl
ASoC: tas5086: Fix wrong value references for boolean kctl
ASoC: wm8960: Fix wrong value references for boolean kctl
ASoC: cs4271: Fix wrong value references for boolean kctl
ASoC: sgtl5000: remove useless register write clearing CHRGPUMP_POWERUP
Change-Id: Ib7976ee2c7224e39074157e28db4158db40b00db
Signed-off-by: Kaushal Kumar <kaushalk@codeaurora.org>
commit bbc78c07a51f6fd29c227b1220a9016e585358ba upstream.
Make sure we're using the new macro, so our
resume signaling will always pass certification.
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQIcBAABCAAGBQJUyuGRAAoJEDjbvchgkmk+7EwQALYPOeh+AManQFB1MQvFuOgZ
/4ulpjhGXw/RPTKHMeyHo8vRfUhMOx8UPF62uql+g1l9b/Zt2bs6qXu4QcxRRsQc
trSTUpi+U14y1hkgqOVOcFYP2ZaTjNEBQgLJ4eGn46CliLqme+rfoyRYm2GXzcR4
6cbSAr3mufdFIpi9/8Dn62Gv0aws5lIv3qkHJXznyuux3tisPT5y6Ux2KJoivPn/
SqADtRpwo+7lTjl15fE++9AqNsGMorV6toT2OO/7nXP+824psInKLmREAT2qC99b
BG61vcYdxOuHtzmwrvCf1jSRjxhvZT0j2xhBr/vCKcxy08AT0vDv68zrV1r6TIuu
U7/CKXtFBY95cjfnkTLJuswBSuIA/+sQHV6DaddH0V8fcZ6rQMLrblQ9ZcFFFkmT
2SG6lmlXqZvcEKYGMnL/Dcow1rkRhB5stiGgTkYxjiRSRpzAHISRJ/GGpsT+rRqK
HpBs5p9JshvRl7RWKwAu+DNGaEK1X/WYxc4/jw6dZFWX7lEWSMIPlr9zXgZCZ39y
V6lV1VVlT9/CSs1swKHUyhHHehlFsnIlQ6Fkiycr/KkuqBLs92Hyb7WhpVa819yX
osXdxSm6J54skiOLKYpBWHpnY09Tc+p28VEfMpErTExgp2oE8F34K7kdhoQPQb97
2mHiXNa+J4CLUNQ+sRmw
=HDBo
-----END PGP SIGNATURE-----
Merge commit 'v3.10.67' into msm-3.10
This merge brings us up to date with upstream kernel.org tag v3.10.67.
It also contains changes to allow forbidden warnings introduced in
the commit 'core, nfqueue, openvswitch: Orphan frags in skb_zerocopy
and handle errors'. Once upstream has corrected these warnings, the
changes to scripts/gcc-wrapper.py, in this commit, can be reverted.
* commit 'v3.10.67' (915 commits)
Linux 3.10.67
md/raid5: fetch_block must fetch all the blocks handle_stripe_dirtying wants.
ext4: fix warning in ext4_da_update_reserve_space()
quota: provide interface for readding allocated space into reserved space
crypto: add missing crypto module aliases
crypto: include crypto- module prefix in template
crypto: prefix module autoloading with "crypto-"
drbd: merge_bvec_fn: properly remap bvm->bi_bdev
Revert "swiotlb-xen: pass dev_addr to swiotlb_tbl_unmap_single"
ipvs: uninitialized data with IP_VS_IPV6
KEYS: close race between key lookup and freeing
sata_dwc_460ex: fix resource leak on error path
x86/asm/traps: Disable tracing and kprobes in fixup_bad_iret and sync_regs
x86, tls: Interpret an all-zero struct user_desc as "no segment"
x86, tls, ldt: Stop checking lm in LDT_empty
x86/tsc: Change Fast TSC calibration failed from error to info
x86, hyperv: Mark the Hyper-V clocksource as being continuous
clocksource: exynos_mct: Fix bitmask regression for exynos4_mct_write
can: dev: fix crtlmode_supported check
bus: mvebu-mbus: fix support of MBus window 13
ARM: dts: imx25: Fix PWM "per" clocks
time: adjtimex: Validate the ADJ_FREQUENCY values
time: settimeofday: Validate the values of tv from user
dm cache: share cache-metadata object across inactive and active DM tables
ipr: wait for aborted command responses
drm/i915: Fix mutex->owner inspection race under DEBUG_MUTEXES
scripts/recordmcount.pl: There is no -m32 gcc option on Super-H anymore
ALSA: usb-audio: Add mic volume fix quirk for Logitech Webcam C210
libata: prevent HSM state change race between ISR and PIO
pinctrl: Fix two deadlocks
gpio: sysfs: fix gpio device-attribute leak
gpio: sysfs: fix gpio-chip device-attribute leak
Linux 3.10.66
s390/3215: fix tty output containing tabs
s390/3215: fix hanging console issue
fsnotify: next_i is freed during fsnotify_unmount_inodes.
netfilter: ipset: small potential read beyond the end of buffer
mmc: sdhci: Fix sleep in atomic after inserting SD card
LOCKD: Fix a race when initialising nlmsvc_timeout
x86, um: actually mark system call tables readonly
um: Skip futex_atomic_cmpxchg_inatomic() test
decompress_bunzip2: off by one in get_next_block()
ARM: shmobile: sh73a0 legacy: Set .control_parent for all irqpin instances
ARM: omap5/dra7xx: Fix frequency typos
ARM: clk-imx6q: fix video divider for rev T0 1.0
ARM: imx6q: drop unnecessary semicolon
ARM: dts: imx25: Fix the SPI1 clocks
Input: I8042 - add Acer Aspire 7738 to the nomux list
Input: i8042 - reset keyboard to fix Elantech touchpad detection
can: kvaser_usb: Don't send a RESET_CHIP for non-existing channels
can: kvaser_usb: Reset all URB tx contexts upon channel close
can: kvaser_usb: Don't free packets when tight on URBs
USB: keyspan: fix null-deref at probe
USB: cp210x: add IDs for CEL USB sticks and MeshWorks devices
USB: cp210x: fix ID for production CEL MeshConnect USB Stick
usb: dwc3: gadget: Stop TRB preparation after limit is reached
usb: dwc3: gadget: Fix TRB preparation during SG
OHCI: add a quirk for ULi M5237 blocking on reset
gpiolib: of: Correct error handling in of_get_named_gpiod_flags
NFSv4.1: Fix client id trunking on Linux
ftrace/jprobes/x86: Fix conflict between jprobes and function graph tracing
vfio-pci: Fix the check on pci device type in vfio_pci_probe()
uvcvideo: Fix destruction order in uvc_delete()
smiapp: Take mutex during PLL update in sensor initialisation
af9005: fix kernel panic on init if compiled without IR
smiapp-pll: Correct clock debug prints
video/logo: prevent use of logos after they have been freed
storvsc: ring buffer failures may result in I/O freeze
iscsi-target: Fail connection on short sendmsg writes
hp_accel: Add support for HP ZBook 15
cfg80211: Fix 160 MHz channels with 80+80 and 160 MHz drivers
ARC: [nsimosci] move peripherals to match model to FPGA
drm/i915: Force the CS stall for invalidate flushes
drm/i915: Invalidate media caches on gen7
drm/radeon: properly filter DP1.2 4k modes on non-DP1.2 hw
drm/radeon: check the right ring in radeon_evict_flags()
drm/vmwgfx: Fix fence event code
enic: fix rx skb checksum
alx: fix alx_poll()
tcp: Do not apply TSO segment limit to non-TSO packets
tg3: tg3_disable_ints using uninitialized mailbox value to disable interrupts
netlink: Don't reorder loads/stores before marking mmap netlink frame as available
netlink: Always copy on mmap TX.
Linux 3.10.65
mm: Don't count the stack guard page towards RLIMIT_STACK
mm: propagate error from stack expansion even for guard page
mm, vmscan: prevent kswapd livelock due to pfmemalloc-throttled process being killed
perf session: Do not fail on processing out of order event
perf: Fix events installation during moving group
perf/x86/intel/uncore: Make sure only uncore events are collected
Btrfs: don't delay inode ref updates during log replay
ARM: mvebu: disable I/O coherency on non-SMP situations on Armada 370/375/38x/XP
scripts/kernel-doc: don't eat struct members with __aligned
nilfs2: fix the nilfs_iget() vs. nilfs_new_inode() races
nfsd4: fix xdr4 inclusion of escaped char
fs: nfsd: Fix signedness bug in compare_blob
serial: samsung: wait for transfer completion before clock disable
writeback: fix a subtle race condition in I_DIRTY clearing
cdc-acm: memory leak in error case
genhd: check for int overflow in disk_expand_part_tbl()
USB: cdc-acm: check for valid interfaces
ALSA: hda - Fix wrong gpio_dir & gpio_mask hint setups for IDT/STAC codecs
ALSA: hda - using uninitialized data
ALSA: usb-audio: extend KEF X300A FU 10 tweak to Arcam rPAC
driver core: Fix unbalanced device reference in drivers_probe
x86, vdso: Use asm volatile in __getcpu
x86_64, vdso: Fix the vdso address randomization algorithm
HID: Add a new id 0x501a for Genius MousePen i608X
HID: add battery quirk for USB_DEVICE_ID_APPLE_ALU_WIRELESS_2011_ISO keyboard
HID: roccat: potential out of bounds in pyra_sysfs_write_settings()
HID: i2c-hid: prevent buffer overflow in early IRQ
HID: i2c-hid: fix race condition reading reports
iommu/vt-d: Fix an off-by-one bug in __domain_mapping()
UBI: Fix double free after do_sync_erase()
UBI: Fix invalid vfree()
pstore-ram: Allow optional mapping with pgprot_noncached
pstore-ram: Fix hangs by using write-combine mappings
PCI: Restore detection of read-only BARs
ASoC: dwc: Ensure FIFOs are flushed to prevent channel swap
ASoC: max98090: Fix ill-defined sidetone route
ASoC: sigmadsp: Refuse to load firmware files with a non-supported version
ath5k: fix hardware queue index assignment
swiotlb-xen: pass dev_addr to swiotlb_tbl_unmap_single
can: peak_usb: fix memset() usage
can: peak_usb: fix cleanup sequence order in case of error during init
ath9k: fix BE/BK queue order
ath9k_hw: fix hardware queue allocation
ocfs2: fix journal commit deadlock
Linux 3.10.64
Btrfs: fix fs corruption on transaction abort if device supports discard
Btrfs: do not move em to modified list when unpinning
eCryptfs: Remove buggy and unnecessary write in file name decode routine
eCryptfs: Force RO mount when encrypted view is enabled
udf: Verify symlink size before loading it
exit: pidns: alloc_pid() leaks pid_namespace if child_reaper is exiting
ncpfs: return proper error from NCP_IOC_SETROOT ioctl
crypto: af_alg - fix backlog handling
userns: Unbreak the unprivileged remount tests
userns: Allow setting gid_maps without privilege when setgroups is disabled
userns: Add a knob to disable setgroups on a per user namespace basis
userns: Rename id_map_mutex to userns_state_mutex
userns: Only allow the creator of the userns unprivileged mappings
userns: Check euid no fsuid when establishing an unprivileged uid mapping
userns: Don't allow unprivileged creation of gid mappings
userns: Don't allow setgroups until a gid mapping has been setablished
userns: Document what the invariant required for safe unprivileged mappings.
groups: Consolidate the setgroups permission checks
umount: Disallow unprivileged mount force
mnt: Update unprivileged remount test
mnt: Implicitly add MNT_NODEV on remount when it was implicitly added by mount
mac80211: free management frame keys when removing station
mac80211: fix multicast LED blinking and counter
KEYS: Fix stale key registration at error path
isofs: Fix unchecked printing of ER records
x86/tls: Don't validate lm in set_thread_area() after all
dm space map metadata: fix sm_bootstrap_get_nr_blocks()
dm bufio: fix memleak when using a dm_buffer's inline bio
nfs41: fix nfs4_proc_layoutget error handling
megaraid_sas: corrected return of wait_event from abort frame path
mmc: block: add newline to sysfs display of force_ro
mfd: tc6393xb: Fail ohci suspend if full state restore is required
md/bitmap: always wait for writes on unplug.
x86, kvm: Clear paravirt_enabled on KVM guests for espfix32's benefit
x86_64, switch_to(): Load TLS descriptors before switching DS and ES
x86/tls: Disallow unusual TLS segments
x86/tls: Validate TLS entries to protect espfix
isofs: Fix infinite looping over CE entries
Linux 3.10.63
ALSA: usb-audio: Don't resubmit pending URBs at MIDI error recovery
powerpc: 32 bit getcpu VDSO function uses 64 bit instructions
ARM: sched_clock: Load cycle count after epoch stabilizes
igb: bring link up when PHY is powered up
ext2: Fix oops in ext2_get_block() called from ext2_quota_write()
nEPT: Nested INVEPT
net: sctp: use MAX_HEADER for headroom reserve in output path
net: mvneta: fix Tx interrupt delay
rtnetlink: release net refcnt on error in do_setlink()
net/mlx4_core: Limit count field to 24 bits in qp_alloc_res
tg3: fix ring init when there are more TX than RX channels
ipv6: gre: fix wrong skb->protocol in WCCP
sata_fsl: fix error handling of irq_of_parse_and_map
ahci: disable MSI on SAMSUNG 0xa800 SSD
AHCI: Add DeviceIDs for Sunrise Point-LP SATA controller
media: smiapp: Only some selection targets are settable
drm/i915: Unlock panel even when LVDS is disabled
drm/radeon: kernel panic in drm_calc_vbltimestamp_from_scanoutpos with 3.18.0-rc6
i2c: davinci: generate STP always when NACK is received
i2c: omap: fix i207 errata handling
i2c: omap: fix NACK and Arbitration Lost irq handling
xen-netfront: Remove BUGs on paged skb data which crosses a page boundary
mm: fix swapoff hang after page migration and fork
mm: frontswap: invalidate expired data on a dup-store failure
Linux 3.10.62
nfsd: Fix ACL null pointer deref
powerpc/powernv: Honor the generic "no_64bit_msi" flag
bnx2fc: do not add shared skbs to the fcoe_rx_list
nfsd4: fix leak of inode reference on delegation failure
nfsd: Fix slot wake up race in the nfsv4.1 callback code
rt2x00: do not align payload on modern H/W
can: dev: avoid calling kfree_skb() from interrupt context
spi: dw: Fix dynamic speed change.
iser-target: Handle DEVICE_REMOVAL event on network portal listener correctly
target: Don't call TFO->write_pending if data_length == 0
srp-target: Retry when QP creation fails with ENOMEM
Input: xpad - use proper endpoint type
ARM: 8222/1: mvebu: enable strex backoff delay
ARM: 8216/1: xscale: correct auxiliary register in suspend/resume
ALSA: usb-audio: Add ctrl message delay quirk for Marantz/Denon devices
can: esd_usb2: fix memory leak on disconnect
USB: xhci: don't start a halted endpoint before its new dequeue is set
usb-quirks: Add reset-resume quirk for MS Wireless Laser Mouse 6000
usb: serial: ftdi_sio: add PIDs for Matrix Orbital products
USB: serial: cp210x: add IDs for CEL MeshConnect USB Stick
USB: keyspan: fix tty line-status reporting
USB: keyspan: fix overrun-error reporting
USB: ssu100: fix overrun-error reporting
iio: Fix IIO_EVENT_CODE_EXTRACT_DIR bit mask
powerpc/pseries: Fix endiannes issue in RTAS call from xmon
powerpc/pseries: Honor the generic "no_64bit_msi" flag
of/base: Fix PowerPC address parsing hack
ASoC: wm_adsp: Avoid attempt to free buffers that might still be in use
ASoC: sgtl5000: Fix SMALL_POP bit definition
PCI/MSI: Add device flag indicating that 64-bit MSIs don't work
ipx: fix locking regression in ipx_sendmsg and ipx_recvmsg
pptp: fix stack info leak in pptp_getname()
qmi_wwan: Add support for HP lt4112 LTE/HSPA+ Gobi 4G Modem
ieee802154: fix error handling in ieee802154fake_probe()
ipv4: Fix incorrect error code when adding an unreachable route
inetdevice: fixed signed integer overflow
sparc64: Fix constraints on swab helpers.
uprobes, x86: Fix _TIF_UPROBE vs _TIF_NOTIFY_RESUME
x86, mm: Set NX across entire PMD at boot
x86: Require exact match for 'noxsave' command line option
x86_64, traps: Rework bad_iret
x86_64, traps: Stop using IST for #SS
x86_64, traps: Fix the espfix64 #DF fixup and rewrite it in C
MIPS: Loongson: Make platform serial setup always built-in.
MIPS: oprofile: Fix backtrace on 64-bit kernel
Linux 3.10.61
mm: memcg: handle non-error OOM situations more gracefully
mm: memcg: do not trap chargers with full callstack on OOM
mm: memcg: rework and document OOM waiting and wakeup
mm: memcg: enable memcg OOM killer only for user faults
x86: finish user fault error path with fatal signal
arch: mm: pass userspace fault flag to generic fault handler
arch: mm: do not invoke OOM killer on kernel fault OOM
arch: mm: remove obsolete init OOM protection
mm: invoke oom-killer from remaining unconverted page fault handlers
net: sctp: fix skb_over_panic when receiving malformed ASCONF chunks
net: sctp: fix panic on duplicate ASCONF chunks
net: sctp: fix remote memory pressure from excessive queueing
KVM: x86: Don't report guest userspace emulation error to userspace
SCSI: hpsa: fix a race in cmd_free/scsi_done
net/mlx4_en: Fix BlueFlame race
ARM: Correct BUG() assembly to ensure it is endian-agnostic
perf/x86/intel: Use proper dTLB-load-misses event on IvyBridge
mei: bus: fix possible boundaries violation
perf: Handle compat ioctl
MIPS: Fix forgotten preempt_enable() when CPU has inclusive pcaches
dell-wmi: Fix access out of memory
ARM: probes: fix instruction fetch order with <asm/opcodes.h>
br: fix use of ->rx_handler_data in code executed on non-rx_handler path
netfilter: nf_nat: fix oops on netns removal
netfilter: xt_bpf: add mising opaque struct sk_filter definition
netfilter: nf_log: release skbuff on nlmsg put failure
netfilter: nfnetlink_log: fix maximum packet length logged to userspace
netfilter: nf_log: account for size of NLMSG_DONE attribute
ipc: always handle a new value of auto_msgmni
clocksource: Remove "weak" from clocksource_default_clock() declaration
kgdb: Remove "weak" from kgdb_arch_pc() declaration
media: ttusb-dec: buffer overflow in ioctl
NFSv4: Fix races between nfs_remove_bad_delegation() and delegation return
nfs: Fix use of uninitialized variable in nfs_getattr()
NFS: Don't try to reclaim delegation open state if recovery failed
NFSv4: Ensure that we remove NFSv4.0 delegations when state has expired
Input: alps - allow up to 2 invalid packets without resetting device
Input: alps - ignore potential bare packets when device is out of sync
dm raid: ensure superblock's size matches device's logical block size
dm btree: fix a recursion depth bug in btree walking code
block: Fix computation of merged request priority
parisc: Use compat layer for msgctl, shmat, shmctl and semtimedop syscalls
scsi: only re-lock door after EH on devices that were reset
nfs: fix pnfs direct write memory leak
firewire: cdev: prevent kernel stack leaking into ioctl arguments
arm64: __clear_user: handle exceptions on strb
ARM: 8198/1: make kuser helpers depend on MMU
drm/radeon: add missing crtc unlock when setting up the MC
mac80211: fix use-after-free in defragmentation
macvtap: Fix csum_start when VLAN tags are present
iwlwifi: configure the LTR
libceph: do not crash on large auth tickets
xtensa: re-wire umount syscall to sys_oldumount
ALSA: usb-audio: Fix memory leak in FTU quirk
ahci: disable MSI instead of NCQ on Samsung pci-e SSDs on macbooks
ahci: Add Device IDs for Intel Sunrise Point PCH
audit: keep inode pinned
x86, x32, audit: Fix x32's AUDIT_ARCH wrt audit
sparc32: Implement xchg and atomic_xchg using ATOMIC_HASH locks
sparc64: Do irq_{enter,exit}() around generic_smp_call_function*().
sparc64: Fix crashes in schizo_pcierr_intr_other().
sunvdc: don't call VD_OP_GET_VTOC
vio: fix reuse of vio_dring slot
sunvdc: limit each sg segment to a page
sunvdc: compute vdisk geometry from capacity
sunvdc: add cdrom and v1.1 protocol support
net: sctp: fix memory leak in auth key management
net: sctp: fix NULL pointer dereference in af->from_addr_param on malformed packet
gre6: Move the setting of dev->iflink into the ndo_init functions.
ip6_tunnel: Use ip6_tnl_dev_init as the ndo_init function.
Linux 3.10.60
libceph: ceph-msgr workqueue needs a resque worker
Btrfs: fix kfree on list_head in btrfs_lookup_csums_range error cleanup
of: Fix overflow bug in string property parsing functions
sysfs: driver core: Fix glue dir race condition by gdp_mutex
i2c: at91: don't account as iowait
acer-wmi: Add acpi_backlight=video quirk for the Acer KAV80
rbd: Fix error recovery in rbd_obj_read_sync()
drm/radeon: remove invalid pci id
usb: gadget: udc: core: fix kernel oops with soft-connect
usb: gadget: function: acm: make f_acm pass USB20CV Chapter9
usb: dwc3: gadget: fix set_halt() bug with pending transfers
crypto: algif - avoid excessive use of socket buffer in skcipher
mm: Remove false WARN_ON from pagecache_isize_extended()
x86, apic: Handle a bad TSC more gracefully
posix-timers: Fix stack info leak in timer_create()
mac80211: fix typo in starting baserate for rts_cts_rate_idx
PM / Sleep: fix recovery during resuming from hibernation
tty: Fix high cpu load if tty is unreleaseable
quota: Properly return errors from dquot_writeback_dquots()
ext3: Don't check quota format when there are no quota files
nfsd4: fix crash on unknown operation number
cpc925_edac: Report UE events properly
e7xxx_edac: Report CE events properly
i3200_edac: Report CE events properly
i82860_edac: Report CE events properly
scsi: Fix error handling in SCSI_IOCTL_SEND_COMMAND
lib/bitmap.c: fix undefined shift in __bitmap_shift_{left|right}()
cgroup/kmemleak: add kmemleak_free() for cgroup deallocations.
usb: Do not allow usb_alloc_streams on unconfigured devices
USB: opticon: fix non-atomic allocation in write path
usb-storage: handle a skipped data phase
spi: pxa2xx: toggle clocks on suspend if not disabled by runtime PM
spi: pl022: Fix incorrect dma_unmap_sg
usb: dwc3: gadget: Properly initialize LINK TRB
wireless: rt2x00: add new rt2800usb device
USB: option: add Haier CE81B CDMA modem
usb: option: add support for Telit LE910
USB: cdc-acm: only raise DTR on transitions from B0
USB: cdc-acm: add device id for GW Instek AFG-2225
usb: serial: ftdi_sio: add "bricked" FTDI device PID
usb: serial: ftdi_sio: add Awinda Station and Dongle products
USB: serial: cp210x: add Silicon Labs 358x VID and PID
serial: Fix divide-by-zero fault in uart_get_divisor()
staging:iio:ade7758: Remove "raw" from channel name
staging:iio:ade7758: Fix check if channels are enabled in prenable
staging:iio:ade7758: Fix NULL pointer deref when enabling buffer
staging:iio:ad5933: Drop "raw" from channel names
staging:iio:ad5933: Fix NULL pointer deref when enabling buffer
OOM, PM: OOM killed task shouldn't escape PM suspend
freezer: Do not freeze tasks killed by OOM killer
ext4: fix oops when loading block bitmap failed
cpufreq: intel_pstate: Fix setting max_perf_pct in performance policy
ext4: fix overflow when updating superblock backups after resize
ext4: check s_chksum_driver when looking for bg csum presence
ext4: fix reservation overflow in ext4_da_write_begin
ext4: add ext4_iget_normal() which is to be used for dir tree lookups
ext4: grab missed write_count for EXT4_IOC_SWAP_BOOT
ext4: don't check quota format when there are no quota files
ext4: check EA value offset when loading
jbd2: free bh when descriptor block checksum fails
MIPS: tlbex: Properly fix HUGE TLB Refill exception handler
target: Fix APTPL metadata handling for dynamic MappedLUNs
target: Fix queue full status NULL pointer for SCF_TRANSPORT_TASK_SENSE
qla_target: don't delete changed nacls
ARC: Update order of registers in KGDB to match GDB 7.5
ARC: [nsimosci] Allow "headless" models to boot
KVM: x86: Emulator fixes for eip canonical checks on near branches
KVM: x86: Fix wrong masking on relative jump/call
kvm: x86: don't kill guest on unknown exit reason
KVM: x86: Check non-canonical addresses upon WRMSR
KVM: x86: Improve thread safety in pit
KVM: x86: Prevent host from panicking on shared MSR writes.
kvm: fix excessive pages un-pinning in kvm_iommu_map error path.
media: tda7432: Fix setting TDA7432_MUTE bit for TDA7432_RF register
media: ds3000: fix LNB supply voltage on Tevii S480 on initialization
media: em28xx-v4l: give back all active video buffers to the vb2 core properly on streaming stop
media: v4l2-common: fix overflow in v4l_bound_align_image()
drm/nouveau/bios: memset dcb struct to zero before parsing
drm/tilcdc: Fix the error path in tilcdc_load()
drm/ast: Fix HW cursor image
Input: i8042 - quirks for Fujitsu Lifebook A544 and Lifebook AH544
Input: i8042 - add noloop quirk for Asus X750LN
framebuffer: fix border color
modules, lock around setting of MODULE_STATE_UNFORMED
dm log userspace: fix memory leak in dm_ulog_tfr_init failure path
block: fix alignment_offset math that assumes io_min is a power-of-2
drbd: compute the end before rb_insert_augmented()
dm bufio: update last_accessed when relinking a buffer
virtio_pci: fix virtio spec compliance on restore
selinux: fix inode security list corruption
pstore: Fix duplicate {console,ftrace}-efi entries
mfd: rtsx_pcr: Fix MSI enable error handling
mnt: Prevent pivot_root from creating a loop in the mount tree
UBI: add missing kmem_cache_free() in process_pool_aeb error path
random: add and use memzero_explicit() for clearing data
crypto: more robust crypto_memneq
fix misuses of f_count() in ppp and netlink
kill wbuf_queued/wbuf_dwork_lock
ALSA: pcm: Zero-clear reserved fields of PCM status ioctl in compat mode
evm: check xattr value length and type in evm_inode_setxattr()
x86, pageattr: Prevent overflow in slow_virt_to_phys() for X86_PAE
x86_64, entry: Fix out of bounds read on sysenter
x86_64, entry: Filter RFLAGS.NT on entry from userspace
x86, flags: Rename X86_EFLAGS_BIT1 to X86_EFLAGS_FIXED
x86, fpu: shift drop_init_fpu() from save_xstate_sig() to handle_signal()
x86, fpu: __restore_xstate_sig()->math_state_restore() needs preempt_disable()
x86: Reject x32 executables if x32 ABI not supported
vfs: fix data corruption when blocksize < pagesize for mmaped data
UBIFS: fix free log space calculation
UBIFS: fix a race condition
UBIFS: remove mst_mutex
fs: Fix theoretical division by 0 in super_cache_scan().
fs: make cont_expand_zero interruptible
mmc: rtsx_pci_sdmmc: fix incorrect last byte in R2 response
libata-sff: Fix controllers with no ctl port
pata_serverworks: disable 64-KB DMA transfers on Broadcom OSB4 IDE Controller
Revert "percpu: free percpu allocation info for uniprocessor system"
lockd: Try to reconnect if statd has moved
drivers/net: macvtap and tun depend on INET
ipv4: dst_entry leak in ip_send_unicast_reply()
ax88179_178a: fix bonding failure
ipv4: fix nexthop attlen check in fib_nh_match
tracing/syscalls: Ignore numbers outside NR_syscalls' range
Linux 3.10.59
ecryptfs: avoid to access NULL pointer when write metadata in xattr
ARM: at91/PMC: don't forget to write PMC_PCDR register to disable clocks
ALSA: usb-audio: Add support for Steinberg UR22 USB interface
ALSA: emu10k1: Fix deadlock in synth voice lookup
ALSA: pcm: use the same dma mmap codepath both for arm and arm64
arm64: compat: fix compat types affecting struct compat_elf_prpsinfo
spi: dw-mid: terminate ongoing transfers at exit
kernel: add support for gcc 5
fanotify: enable close-on-exec on events' fd when requested in fanotify_init()
mm: clear __GFP_FS when PF_MEMALLOC_NOIO is set
Bluetooth: Fix issue with USB suspend in btusb driver
Bluetooth: Fix HCI H5 corrupted ack value
rt2800: correct BBP1_TX_POWER_CTRL mask
PCI: Generate uppercase hex for modalias interface class
PCI: Increase IBM ipr SAS Crocodile BARs to at least system page size
iwlwifi: Add missing PCI IDs for the 7260 series
NFSv4.1: Fix an NFSv4.1 state renewal regression
NFSv4: fix open/lock state recovery error handling
NFSv4: Fix lock recovery when CREATE_SESSION/SETCLIENTID_CONFIRM fails
lzo: check for length overrun in variable length encoding.
Revert "lzo: properly check for overruns"
Documentation: lzo: document part of the encoding
m68k: Disable/restore interrupts in hwreg_present()/hwreg_write()
Drivers: hv: vmbus: Fix a bug in vmbus_open()
Drivers: hv: vmbus: Cleanup vmbus_establish_gpadl()
Drivers: hv: vmbus: Cleanup vmbus_teardown_gpadl()
Drivers: hv: vmbus: Cleanup vmbus_post_msg()
firmware_class: make sure fw requests contain a name
qla2xxx: Use correct offset to req-q-out for reserve calculation
mptfusion: enable no_write_same for vmware scsi disks
be2iscsi: check ip buffer before copying
regmap: fix NULL pointer dereference in _regmap_write/read
regmap: debugfs: fix possbile NULL pointer dereference
spi: dw-mid: check that DMA was inited before exit
spi: dw-mid: respect 8 bit mode
x86/intel/quark: Switch off CR4.PGE so TLB flush uses CR3 instead
kvm: don't take vcpu mutex for obviously invalid vcpu ioctls
KVM: s390: unintended fallthrough for external call
kvm: x86: fix stale mmio cache bug
fs: Add a missing permission check to do_umount
Btrfs: fix race in WAIT_SYNC ioctl
Btrfs: fix build_backref_tree issue with multiple shared blocks
Btrfs: try not to ENOSPC on log replay
Linux 3.10.58
USB: cp210x: add support for Seluxit USB dongle
USB: serial: cp210x: added Ketra N1 wireless interface support
USB: Add device quirk for ASUS T100 Base Station keyboard
ipv6: reallocate addrconf router for ipv6 address when lo device up
tcp: fixing TLP's FIN recovery
sctp: handle association restarts when the socket is closed.
ip6_gre: fix flowi6_proto value in xmit path
hyperv: Fix a bug in netvsc_start_xmit()
tg3: Allow for recieve of full-size 8021AD frames
tg3: Work around HW/FW limitations with vlan encapsulated frames
l2tp: fix race while getting PMTU on PPP pseudo-wire
openvswitch: fix panic with multiple vlan headers
packet: handle too big packets for PACKET_V3
tcp: fix tcp_release_cb() to dispatch via address family for mtu_reduced()
sit: Fix ipip6_tunnel_lookup device matching criteria
myri10ge: check for DMA mapping errors
Linux 3.10.57
cpufreq: ondemand: Change the calculation of target frequency
cpufreq: Fix wrong time unit conversion
nl80211: clear skb cb before passing to netlink
drbd: fix regression 'out of mem, failed to invoke fence-peer helper'
jiffies: Fix timeval conversion to jiffies
md/raid5: disable 'DISCARD' by default due to safety concerns.
media: vb2: fix VBI/poll regression
mm: numa: Do not mark PTEs pte_numa when splitting huge pages
mm, thp: move invariant bug check out of loop in __split_huge_page_map
ring-buffer: Fix infinite spin in reading buffer
init/Kconfig: Fix HAVE_FUTEX_CMPXCHG to not break up the EXPERT menu
perf: fix perf bug in fork()
udf: Avoid infinite loop when processing indirect ICBs
Linux 3.10.56
vm_is_stack: use for_each_thread() rather then buggy while_each_thread()
oom_kill: add rcu_read_lock() into find_lock_task_mm()
oom_kill: has_intersects_mems_allowed() needs rcu_read_lock()
oom_kill: change oom_kill.c to use for_each_thread()
introduce for_each_thread() to replace the buggy while_each_thread()
kernel/fork.c:copy_process(): unify CLONE_THREAD-or-thread_group_leader code
arm: multi_v7_defconfig: Enable Zynq UART driver
ext2: Fix fs corruption in ext2_get_xip_mem()
serial: 8250_dma: check the result of TX buffer mapping
ARM: 7748/1: oabi: handle faults when loading swi instruction from userspace
netfilter: nf_conntrack: avoid large timeout for mid-stream pickup
PM / sleep: Use valid_state() for platform-dependent sleep states only
PM / sleep: Add state field to pm_states[] entries
ipvs: fix ipv6 hook registration for local replies
ipvs: Maintain all DSCP and ECN bits for ipv6 tun forwarding
ipvs: avoid netns exit crash on ip_vs_conn_drop_conntrack
md/raid1: fix_read_error should act on all non-faulty devices.
media: cx18: fix kernel oops with tda8290 tuner
Fix nasty 32-bit overflow bug in buffer i/o code.
perf kmem: Make it work again on non NUMA machines
perf: Fix a race condition in perf_remove_from_context()
alarmtimer: Lock k_itimer during timer callback
alarmtimer: Do not signal SIGEV_NONE timers
parisc: Only use -mfast-indirect-calls option for 32-bit kernel builds
powerpc/perf: Fix ABIv2 kernel backtraces
sched: Fix unreleased llc_shared_mask bit during CPU hotplug
ocfs2/dlm: do not get resource spinlock if lockres is new
nilfs2: fix data loss with mmap()
fs/notify: don't show f_handle if exportfs_encode_inode_fh failed
fsnotify/fdinfo: use named constants instead of hardcoded values
kcmp: fix standard comparison bug
Revert "mac80211: disable uAPSD if all ACs are under ACM"
usb: dwc3: core: fix ordering for PHY suspend
usb: dwc3: core: fix order of PM runtime calls
usb: host: xhci: fix compliance mode workaround
genhd: fix leftover might_sleep() in blk_free_devt()
lockd: fix rpcbind crash on lockd startup failure
rtlwifi: rtl8192cu: Add new ID
percpu: perform tlb flush after pcpu_map_pages() failure
percpu: fix pcpu_alloc_pages() failure path
percpu: free percpu allocation info for uniprocessor system
ata_piix: Add Device IDs for Intel 9 Series PCH
Input: i8042 - add nomux quirk for Avatar AVIU-145A6
Input: i8042 - add Fujitsu U574 to no_timeout dmi table
Input: atkbd - do not try 'deactivate' keyboard on any LG laptops
Input: elantech - fix detection of touchpad on ASUS s301l
Input: synaptics - add support for ForcePads
Input: serport - add compat handling for SPIOCSTYPE ioctl
dm crypt: fix access beyond the end of allocated space
block: Fix dev_t minor allocation lifetime
workqueue: apply __WQ_ORDERED to create_singlethread_workqueue()
Revert "iwlwifi: dvm: don't enable CTS to self"
SCSI: libiscsi: fix potential buffer overrun in __iscsi_conn_send_pdu
NFC: microread: Potential overflows in microread_target_discovered()
iscsi-target: Fix memory corruption in iscsit_logout_post_handler_diffcid
iscsi-target: avoid NULL pointer in iscsi_copy_param_list failure
Target/iser: Don't put isert_conn inside disconnected handler
Target/iser: Get isert_conn reference once got to connected_handler
iio:inkern: fix overwritten -EPROBE_DEFER in of_iio_channel_get_by_name
iio:magnetometer: bugfix magnetometers gain values
iio: adc: ad_sigma_delta: Fix indio_dev->trig assignment
iio: st_sensors: Fix indio_dev->trig assignment
iio: meter: ade7758: Fix indio_dev->trig assignment
iio: inv_mpu6050: Fix indio_dev->trig assignment
iio: gyro: itg3200: Fix indio_dev->trig assignment
iio:trigger: modify return value for iio_trigger_get
CIFS: Fix SMB2 readdir error handling
CIFS: Fix directory rename error
ASoC: davinci-mcasp: Correct rx format unit configuration
shmem: fix nlink for rename overwrite directory
x86 early_ioremap: Increase FIX_BTMAPS_SLOTS to 8
KVM: x86: handle idiv overflow at kvm_write_tsc
regmap: Fix handling of volatile registers for format_write() chips
ACPICA: Update to GPIO region handler interface.
MIPS: mcount: Adjust stack pointer for static trace in MIPS32
MIPS: ZBOOT: add missing <linux/string.h> include
ARM: 8165/1: alignment: don't break misaligned NEON load/store
ARM: 7897/1: kexec: Use the right ISA for relocate_new_kernel
ARM: 8133/1: use irq_set_affinity with force=false when migrating irqs
ARM: 8128/1: abort: don't clear the exclusive monitors
NFSv4: Fix another bug in the close/open_downgrade code
NFSv4: nfs4_state_manager() vs. nfs_server_remove_lists()
usb:hub set hub->change_bits when over-current happens
usb: dwc3: omap: fix ordering for runtime pm calls
USB: EHCI: unlink QHs even after the controller has stopped
USB: storage: Add quirks for Entrega/Xircom USB to SCSI converters
USB: storage: Add quirk for Ariston Technologies iConnect USB to SCSI adapter
USB: storage: Add quirk for Adaptec USBConnect 2000 USB-to-SCSI Adapter
storage: Add single-LUN quirk for Jaz USB Adapter
usb: hub: take hub->hdev reference when processing from eventlist
xhci: fix oops when xhci resumes from hibernate with hw lpm capable devices
xhci: Fix null pointer dereference if xhci initialization fails
USB: zte_ev: fix removed PIDs
USB: ftdi_sio: add support for NOVITUS Bono E thermal printer
USB: sierra: add 1199:68AA device ID
USB: sierra: avoid CDC class functions on "68A3" devices
USB: zte_ev: remove duplicate Qualcom PID
USB: zte_ev: remove duplicate Gobi PID
Revert "USB: option,zte_ev: move most ZTE CDMA devices to zte_ev"
USB: option: add VIA Telecom CDS7 chipset device id
USB: option: reduce interrupt-urb logging verbosity
USB: serial: fix potential heap buffer overflow
USB: sisusb: add device id for Magic Control USB video
USB: serial: fix potential stack buffer overflow
USB: serial: pl2303: add device id for ztek device
xtensa: fix a6 and a7 handling in fast_syscall_xtensa
xtensa: fix TLBTEMP_BASE_2 region handling in fast_second_level_miss
xtensa: fix access to THREAD_RA/THREAD_SP/THREAD_DS
xtensa: fix address checks in dma_{alloc,free}_coherent
xtensa: replace IOCTL code definitions with constants
drm/radeon: add connector quirk for fujitsu board
drm/vmwgfx: Fix a potential infinite spin waiting for fifo idle
drm/ast: AST2000 cannot be detected correctly
drm/i915: Wait for vblank before enabling the TV encoder
drm/i915: Remove bogus __init annotation from DMI callbacks
HID: logitech-dj: prevent false errors to be shown
HID: magicmouse: sanity check report size in raw_event() callback
HID: picolcd: sanity check report size in raw_event() callback
cfq-iosched: Fix wrong children_weight calculation
ALSA: pcm: fix fifo_size frame calculation
ALSA: hda - Fix invalid pin powermap without jack detection
ALSA: hda - Fix COEF setups for ALC1150 codec
ALSA: core: fix buffer overflow in snd_info_get_line()
arm64: ptrace: fix compat hardware watchpoint reporting
trace: Fix epoll hang when we race with new entries
i2c: at91: Fix a race condition during signal handling in at91_do_twi_xfer.
i2c: at91: add bound checking on SMBus block length bytes
arm64: flush TLS registers during exec
ibmveth: Fix endian issues with rx_no_buffer statistic
ahci: add pcid for Marvel 0x9182 controller
ahci: Add Device IDs for Intel 9 Series PCH
pata_scc: propagate return value of scc_wait_after_reset
drm/i915: read HEAD register back in init_ring_common() to enforce ordering
drm/radeon: load the lm63 driver for an lm64 thermal chip.
drm/ttm: Choose a pool to shrink correctly in ttm_dma_pool_shrink_scan().
drm/ttm: Fix possible division by 0 in ttm_dma_pool_shrink_scan().
drm/tilcdc: fix double kfree
drm/tilcdc: fix release order on exit
drm/tilcdc: panel: fix leak when unloading the module
drm/tilcdc: tfp410: fix dangling sysfs connector node
drm/tilcdc: slave: fix dangling sysfs connector node
drm/tilcdc: panel: fix dangling sysfs connector node
carl9170: fix sending URBs with wrong type when using full-speed
Linux 3.10.55
libceph: gracefully handle large reply messages from the mon
libceph: rename ceph_msg::front_max to front_alloc_len
tpm: Provide a generic means to override the chip returned timeouts
vfs: fix bad hashing of dentries
dcache.c: get rid of pointless macros
IB/srp: Fix deadlock between host removal and multipathd
blkcg: don't call into policy draining if root_blkg is already gone
mtd: nand: omap: Fix 1-bit Hamming code scheme, omap_calculate_ecc()
mtd/ftl: fix the double free of the buffers allocated in build_maps()
CIFS: Fix wrong restart readdir for SMB1
CIFS: Fix wrong filename length for SMB2
CIFS: Fix wrong directory attributes after rename
CIFS: Possible null ptr deref in SMB2_tcon
CIFS: Fix async reading on reconnects
CIFS: Fix STATUS_CANNOT_DELETE error mapping for SMB2
libceph: do not hard code max auth ticket len
libceph: add process_one_ticket() helper
libceph: set last_piece in ceph_msg_data_pages_cursor_init() correctly
md/raid1,raid10: always abort recover on write error.
xfs: don't zero partial page cache pages during O_DIRECT writes
xfs: don't zero partial page cache pages during O_DIRECT writes
xfs: don't dirty buffers beyond EOF
xfs: quotacheck leaves dquot buffers without verifiers
RDMA/iwcm: Use a default listen backlog if needed
md/raid10: Fix memory leak when raid10 reshape completes.
md/raid10: fix memory leak when reshaping a RAID10.
md/raid6: avoid data corruption during recovery of double-degraded RAID6
Bluetooth: Avoid use of session socket after the session gets freed
Bluetooth: never linger on process exit
mnt: Add tests for unprivileged remount cases that have found to be faulty
mnt: Change the default remount atime from relatime to the existing value
mnt: Correct permission checks in do_remount
mnt: Move the test for MNT_LOCK_READONLY from change_mount_flags into do_remount
mnt: Only change user settable mount flags in remount
ring-buffer: Up rb_iter_peek() loop count to 3
ring-buffer: Always reset iterator to reader page
ACPI / cpuidle: fix deadlock between cpuidle_lock and cpu_hotplug.lock
ACPI: Run fixed event device notifications in process context
ACPICA: Utilities: Fix memory leak in acpi_ut_copy_iobject_to_iobject
bfa: Fix undefined bit shift on big-endian architectures with 32-bit DMA address
ASoC: pxa-ssp: drop SNDRV_PCM_FMTBIT_S24_LE
ASoC: max98090: Fix missing free_irq
ASoC: samsung: Correct I2S DAI suspend/resume ops
ASoC: wm_adsp: Add missing MODULE_LICENSE
ASoC: pcm: fix dpcm_path_put in dpcm runtime update
openrisc: Rework signal handling
MIPS: Fix accessing to per-cpu data when flushing the cache
MIPS: OCTEON: make get_system_type() thread-safe
MIPS: asm: thread_info: Add _TIF_SECCOMP flag
MIPS: Cleanup flags in syscall flags handlers.
MIPS: asm/reg.h: Make 32- and 64-bit definitions available at the same time
MIPS: Remove BUG_ON(!is_fpu_owner()) in do_ade()
MIPS: tlbex: Fix a missing statement for HUGETLB
MIPS: Prevent user from setting FCSR cause bits
MIPS: GIC: Prevent array overrun
drivers: scsi: storvsc: Correctly handle TEST_UNIT_READY failure
Drivers: scsi: storvsc: Implement a eh_timed_out handler
powerpc/pseries: Failure on removing device node
powerpc/mm: Use read barrier when creating real_pte
powerpc/mm/numa: Fix break placement
regulator: arizona-ldo1: remove bypass functionality
mfd: omap-usb-host: Fix improper mask use.
kernel/smp.c:on_each_cpu_cond(): fix warning in fallback path
CAPABILITIES: remove undefined caps from all processes
tpm: missing tpm_chip_put in tpm_get_random()
firmware: Do not use WARN_ON(!spin_is_locked())
spi: omap2-mcspi: Configure hardware when slave driver changes mode
spi: orion: fix incorrect handling of cell-index DT property
iommu/amd: Fix cleanup_domain for mass device removal
media: media-device: Remove duplicated memset() in media_enum_entities()
media: au0828: Only alt setting logic when needed
media: xc4000: Fix get_frequency()
media: xc5000: Fix get_frequency()
Linux 3.10.54
USB: fix build error with CONFIG_PM_RUNTIME disabled
NFSv4: Fix problems with close in the presence of a delegation
NFSv3: Fix another acl regression
svcrdma: Select NFSv4.1 backchannel transport based on forward channel
NFSD: Decrease nfsd_users in nfsd_startup_generic fail
usb: hub: Prevent hub autosuspend if usbcore.autosuspend is -1
USB: whiteheat: Added bounds checking for bulk command response
USB: ftdi_sio: Added PID for new ekey device
USB: ftdi_sio: add Basic Micro ATOM Nano USB2Serial PID
ARM: OMAP2+: hwmod: Rearm wake-up interrupts for DT when MUSB is idled
usb: xhci: amd chipset also needs short TX quirk
xhci: Treat not finding the event_seg on COMP_STOP the same as COMP_STOP_INVAL
Staging: speakup: Update __speakup_paste_selection() tty (ab)usage to match vt
jbd2: fix infinite loop when recovering corrupt journal blocks
mei: nfc: fix memory leak in error path
mei: reset client state on queued connect request
Btrfs: fix csum tree corruption, duplicate and outdated checksums
hpsa: fix bad -ENOMEM return value in hpsa_big_passthru_ioctl
x86/efi: Enforce CONFIG_RELOCATABLE for EFI boot stub
x86_64/vsyscall: Fix warn_bad_vsyscall log output
x86: don't exclude low BIOS area when allocating address space for non-PCI cards
drm/radeon: add additional SI pci ids
ext4: fix BUG_ON in mb_free_blocks()
kvm: iommu: fix the third parameter of kvm_iommu_put_pages (CVE-2014-3601)
Revert "KVM: x86: Increase the number of fixed MTRR regs to 10"
KVM: nVMX: fix "acknowledge interrupt on exit" when APICv is in use
KVM: x86: always exit on EOIs for interrupts listed in the IOAPIC redir table
KVM: x86: Inter-privilege level ret emulation is not implemeneted
crypto: ux500 - make interrupt mode plausible
serial: core: Preserve termios c_cflag for console resume
ext4: fix ext4_discard_allocated_blocks() if we can't allocate the pa struct
drivers/i2c/busses: use correct type for dma_map/unmap
hwmon: (dme1737) Prevent overflow problem when writing large limits
hwmon: (ads1015) Fix out-of-bounds array access
hwmon: (lm85) Fix various errors on attribute writes
hwmon: (ads1015) Fix off-by-one for valid channel index checking
hwmon: (gpio-fan) Prevent overflow problem when writing large limits
hwmon: (lm78) Fix overflow problems seen when writing large temperature limits
hwmon: (sis5595) Prevent overflow problem when writing large limits
drm: omapdrm: fix compiler errors
ARM: OMAP3: Fix choice of omap3_restore_es function in OMAP34XX rev3.1.2 case.
mei: start disconnect request timer consistently
ALSA: hda/realtek - Avoid setting wrong COEF on ALC269 & co
ALSA: hda/ca0132 - Don't try loading firmware at resume when already failed
ALSA: virtuoso: add Xonar Essence STX II support
ALSA: hda - fix an external mic jack problem on a HP machine
USB: Fix persist resume of some SS USB devices
USB: ehci-pci: USB host controller support for Intel Quark X1000
USB: serial: ftdi_sio: Add support for new Xsens devices
USB: serial: ftdi_sio: Annotate the current Xsens PID assignments
USB: OHCI: don't lose track of EDs when a controller dies
isofs: Fix unbounded recursion when processing relocated directories
HID: fix a couple of off-by-ones
HID: logitech: perform bounds checking on device_id early enough
stable_kernel_rules: Add pointer to netdev-FAQ for network patches
Linux 3.10.53
arch/sparc/math-emu/math_32.c: drop stray break operator
sparc64: ldc_connect() should not return EINVAL when handshake is in progress.
sunsab: Fix detection of BREAK on sunsab serial console
bbc-i2c: Fix BBC I2C envctrl on SunBlade 2000
sparc64: Guard against flushing openfirmware mappings.
sparc64: Do not insert non-valid PTEs into the TSB hash table.
sparc64: Add membar to Niagara2 memcpy code.
sparc64: Fix huge TSB mapping on pre-UltraSPARC-III cpus.
sparc64: Don't bark so loudly about 32-bit tasks generating 64-bit fault addresses.
sparc64: Fix top-level fault handling bugs.
sparc64: Handle 32-bit tasks properly in compute_effective_address().
sparc64: Make itc_sync_lock raw
sparc64: Fix argument sign extension for compat_sys_futex().
sctp: fix possible seqlock seadlock in sctp_packet_transmit()
iovec: make sure the caller actually wants anything in memcpy_fromiovecend
net: Correctly set segment mac_len in skb_segment().
macvlan: Initialize vlan_features to turn on offload support.
net: sctp: inherit auth_capable on INIT collisions
tcp: Fix integer-overflow in TCP vegas
tcp: Fix integer-overflows in TCP veno
net: sendmsg: fix NULL pointer dereference
ip: make IP identifiers less predictable
inetpeer: get rid of ip_id_count
bnx2x: fix crash during TSO tunneling
Linux 3.10.52
x86/espfix/xen: Fix allocation of pages for paravirt page tables
lib/btree.c: fix leak of whole btree nodes
net/l2tp: don't fall back on UDP [get|set]sockopt
net: mvneta: replace Tx timer with a real interrupt
net: mvneta: add missing bit descriptions for interrupt masks and causes
net: mvneta: do not schedule in mvneta_tx_timeout
net: mvneta: use per_cpu stats to fix an SMP lock up
net: mvneta: increase the 64-bit rx/tx stats out of the hot path
Revert "mac80211: move "bufferable MMPDU" check to fix AP mode scan"
staging: vt6655: Fix Warning on boot handle_irq_event_percpu.
x86_64/entry/xen: Do not invoke espfix64 on Xen
x86, espfix: Make it possible to disable 16-bit support
x86, espfix: Make espfix64 a Kconfig option, fix UML
x86, espfix: Fix broken header guard
x86, espfix: Move espfix definitions into a separate header file
x86-64, espfix: Don't leak bits 31:16 of %esp returning to 16-bit stack
Revert "x86-64, modify_ldt: Make support for 16-bit segments a runtime option"
timer: Fix lock inversion between hrtimer_bases.lock and scheduler locks
printk: rename printk_sched to printk_deferred
iio: buffer: Fix demux table creation
staging: vt6655: Fix disassociated messages every 10 seconds
mm, thp: do not allow thp faults to avoid cpuset restrictions
scsi: handle flush errors properly
rapidio/tsi721_dma: fix failure to obtain transaction descriptor
cfg80211: fix mic_failure tracing
ARM: 8115/1: LPAE: reduce damage caused by idmap to virtual memory layout
crypto: af_alg - properly label AF_ALG socket
Linux 3.10.51
core, nfqueue, openvswitch: Orphan frags in skb_zerocopy and handle errors
x86/efi: Include a .bss section within the PE/COFF headers
s390/ptrace: fix PSW mask check
Fix gcc-4.9.0 miscompilation of load_balance() in scheduler
mm: hugetlb: fix copy_hugetlb_page_range()
x86_32, entry: Store badsys error code in %eax
hwmon: (smsc47m192) Fix temperature limit and vrm write operations
parisc: Remove SA_RESTORER define
coredump: fix the setting of PF_DUMPCORE
Input: fix defuzzing logic
slab_common: fix the check for duplicate slab names
slab_common: Do not check for duplicate slab names
tracing: Fix wraparound problems in "uptime" trace clock
blkcg: don't call into policy draining if root_blkg is already gone
ahci: add support for the Promise FastTrak TX8660 SATA HBA (ahci mode)
libata: introduce ata_host->n_tags to avoid oops on SAS controllers
libata: support the ata host which implements a queue depth less than 32
block: don't assume last put of shared tags is for the host
block: provide compat ioctl for BLKZEROOUT
media: tda10071: force modulation to QPSK on DVB-S
media: hdpvr: fix two audio bugs
Linux 3.10.50
ARC: Implement ptrace(PTRACE_GET_THREAD_AREA)
sched: Fix possible divide by zero in avg_atom() calculation
locking/mutex: Disable optimistic spinning on some architectures
PM / sleep: Fix request_firmware() error at resume
dm cache metadata: do not allow the data block size to change
dm thin metadata: do not allow the data block size to change
alarmtimer: Fix bug where relative alarm timers were treated as absolute
drm/radeon: avoid leaking edid data
drm/qxl: return IRQ_NONE if it was not our irq
drm/radeon: set default bl level to something reasonable
irqchip: gic: Fix core ID calculation when topology is read from DT
irqchip: gic: Add support for cortex a7 compatible string
ring-buffer: Fix polling on trace_pipe
mwifiex: fix Tx timeout issue
perf/x86/intel: ignore CondChgd bit to avoid false NMI handling
ipv4: fix buffer overflow in ip_options_compile()
dns_resolver: Null-terminate the right string
dns_resolver: assure that dns_query() result is null-terminated
sunvnet: clean up objects created in vnet_new() on vnet_exit()
net: pppoe: use correct channel MTU when using Multilink PPP
net: sctp: fix information leaks in ulpevent layer
tipc: clear 'next'-pointer of message fragments before reassembly
be2net: set EQ DB clear-intr bit in be_open()
netlink: Fix handling of error from netlink_dump().
net: mvneta: Fix big endian issue in mvneta_txq_desc_csum()
net: mvneta: fix operation in 10 Mbit/s mode
appletalk: Fix socket referencing in skb
tcp: fix false undo corner cases
igmp: fix the problem when mc leave group
net: qmi_wwan: add two Sierra Wireless/Netgear devices
net: qmi_wwan: Add ID for Telewell TW-LTE 4G v2
ipv4: icmp: Fix pMTU handling for rare case
tcp: Fix divide by zero when pushing during tcp-repair
bnx2x: fix possible panic under memory stress
net: fix sparse warning in sk_dst_set()
ipv4: irq safe sk_dst_[re]set() and ipv4_sk_update_pmtu() fix
ipv4: fix dst race in sk_dst_get()
8021q: fix a potential memory leak
net: sctp: check proc_dointvec result in proc_sctp_do_auth
tcp: fix tcp_match_skb_to_sack() for unaligned SACK at end of an skb
ip_tunnel: fix ip_tunnel_lookup
shmem: fix splicing from a hole while it's punched
shmem: fix faulting into a hole, not taking i_mutex
shmem: fix faulting into a hole while it's punched
iwlwifi: dvm: don't enable CTS to self
igb: do a reset on SR-IOV re-init if device is down
hwmon: (adt7470) Fix writes to temperature limit registers
hwmon: (da9052) Don't use dash in the name attribute
hwmon: (da9055) Don't use dash in the name attribute
tracing: Add ftrace_trace_stack into __trace_puts/__trace_bputs
tracing: Fix graph tracer with stack tracer on other archs
fuse: handle large user and group ID
Bluetooth: Ignore H5 non-link packets in non-active state
Drivers: hv: util: Fix a bug in the KVP code
media: gspca_pac7302: Add new usb-id for Genius i-Look 317
usb: Check if port status is equal to RxDetect
Signed-off-by: Ian Maund <imaund@codeaurora.org>
commit ddbe1fca0bcb87ca8c199ea873a456ca8a948567 upstream.
This full-speed USB device generates spurious remote wakeup event
as soon as USB_DEVICE_REMOTE_WAKEUP feature is set. As the result,
Linux can't enter system suspend and S0ix power saving modes once
this keyboard is used.
This patch tries to introduce USB_QUIRK_IGNORE_REMOTE_WAKEUP quirk.
With this quirk set, wakeup capability will be ignored during
device configure.
This patch could be back-ported to kernels as old as 2.6.39.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 08d1dec6f4054e3613f32051d9b149d4203ce0d2 upstream.
When we are doing compliance test with xHCI, we found that if we
enable CONFIG_USB_SUSPEND and plug in a bad device which causes
over-current condition to the root port, software will not be noticed.
The reason is that current code don't set hub->change_bits in
hub_activate() when over-current happens, and then hub_events() will
not check the port status because it thinks nothing changed.
If CONFIG_USB_SUSPEND is disabled, the interrupt pipe of the hub will
report the change and set hub->event_bits, and then hub_events() will
check what events happened.In this case over-current can be detected.
Signed-off-by: Shen Guang <shenguang10@gmail.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Acked-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Cc: Frans Klaver <fransklaver@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c605f3cdff53a743f6d875b76956b239deca1272 upstream.
During surprise device hotplug removal tests, it was observed that
hub_events may try to call usb_lock_device on a device that has already
been freed. Protect the usb_device by taking out a reference (under the
hub_event_lock) when hub_events pulls it off the list, returning the
reference after hub_events is finished using it.
Signed-off-by: Joe Lawrence <joe.lawrence@stratus.com>
Suggested-by: David Bulkow <david.bulkow@stratus.com> for using kref
Suggested-by: Alan Stern <stern@rowland.harvard.edu> for placement
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a9ef803d740bfadf5e505fbc57efa57692e27025 upstream.
commit bdd405d2a528 ("usb: hub: Prevent hub autosuspend if
usbcore.autosuspend is -1") causes a build error if CONFIG_PM_RUNTIME is
disabled. Fix that by doing a simple #ifdef guard around it.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Cc: Roger Quadros <rogerq@ti.com>
Cc: Michael Welling <mwelling@emacinc.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bdd405d2a5287bdb9b04670ea255e1f122138e66 upstream.
If user specifies that USB autosuspend must be disabled by module
parameter "usbcore.autosuspend=-1" then we must prevent
autosuspend of USB hub devices as well.
commit 596d789a21 introduced in v3.8 changed the original behaivour
and stopped respecting the usbcore.autosuspend parameter for hubs.
Fixes: 596d789a21 "USB: set hub's default autosuspend delay as 0"
Signed-off-by: Roger Quadros <rogerq@ti.com>
Tested-by: Michael Welling <mwelling@emacinc.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a40178b2fa6ad87670fb1e5fa4024db00c149629 upstream.
Problem Summary: Problem has been observed generally with PM states
where VBUS goes off during suspend. There are some SS USB devices which
take longer time for link training compared to many others. Such
devices fail to reconnect with same old address which was associated
with it before suspend.
When system resumes, at some point of time (dpm_run_callback->
usb_dev_resume->usb_resume->usb_resume_both->usb_resume_device->
usb_port_resume) SW reads hub status. If device is present,
then it finishes port resume and re-enumerates device with same
address. If device is not present then, SW thinks that device was
removed during suspend and therefore does logical disconnection
and removes all the resource allocated for this device.
Now, if I put sufficient delay just before root hub status read in
usb_resume_device then, SW sees always that device is present. In normal
course(without any delay) SW sees that no device is present and then SW
removes all resource associated with the device at this port. In the
latter case, after sometime, device says that hey I am here, now host
enumerates it, but with new address.
Problem had been reproduced when I connect verbatim USB3.0 hard disc
with my STiH407 XHCI host running with 3.10 kernel.
I see that similar problem has been reported here.
https://bugzilla.kernel.org/show_bug.cgi?id=53211
Reading above it seems that bug was not in 3.6.6 and was present in 3.8
and again it was not present for some in 3.12.6, while it was present
for few others. I tested with 3.13-FC19 running at i686 desktop, problem
was still there. However, I was failed to reproduce it with 3.16-RC4
running at same i686 machine. I would say it is just a random
observation. Problem for few devices is always there, as I am unable to
find a proper fix for the issue.
So, now question is what should be the amount of delay so that host is
always able to recognize suspended device after resume.
XHCI specs 4.19.4 says that when Link training is successful, port sets
CSC bit to 1. So if SW reads port status before successful link
training, then it will not find device to be present. USB Analyzer log
with such buggy devices show that in some cases device switch on the
RX termination after long delay of host enabling the VBUS. In few other
cases it has been seen that device fails to negotiate link training in
first attempt. It has been reported till now that few devices take as
long as 2000 ms to train the link after host enabling its VBUS and
RX termination. This patch implements a 2000 ms timeout for CSC bit to set
ie for link training. If in a case link trains before timeout, loop will
exit earlier.
This patch implements above delay, but only for SS device and when
persist is enabled.
So, for the good device overhead is almost none. While for the bad
devices penalty could be the time which it take for link training.
But, If a device was connected before suspend, and was removed
while system was asleep, then the penalty would be the timeout ie
2000 ms.
Results:
Verbatim USB SS hard disk connected with STiH407 USB host running 3.10
Kernel resumes in 461 msecs without this patch, but hard disk is
assigned a new device address. Same system resumes in 790 msecs with
this patch, but with old device address.
Signed-off-by: Pratyush Anand <pratyush.anand@st.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* commit 'v3.10.49': (529 commits)
Linux 3.10.49
ACPI / battery: Retry to get battery information if failed during probing
x86, ioremap: Speed up check for RAM pages
Score: Modify the Makefile of Score, remove -mlong-calls for compiling
Score: The commit is for compiling successfully.
Score: Implement the function csum_ipv6_magic
score: normalize global variables exported by vmlinux.lds
rtmutex: Plug slow unlock race
rtmutex: Handle deadlock detection smarter
rtmutex: Detect changes in the pi lock chain
rtmutex: Fix deadlock detector for real
ring-buffer: Check if buffer exists before polling
drm/radeon: stop poisoning the GART TLB
drm/radeon: fix typo in golden register setup on evergreen
ext4: disable synchronous transaction batching if max_batch_time==0
ext4: clarify error count warning messages
ext4: fix unjournalled bg descriptor while initializing inode bitmap
dm io: fix a race condition in the wake up code for sync_io
Drivers: hv: vmbus: Fix a bug in the channel callback dispatch code
clk: spear3xx: Use proper control register offset
...
In addition to bringing in upstream commits, this merge also makes minor
changes to mainitain compatibility with upstream:
The definition of list_next_entry in qcrypto.c and ipa_dp.c has been
removed, as upstream has moved the definition to list.h. The implementation
of list_next_entry was identical between the two.
irq.c, for both arm and arm64 architecture, has had its calls to
__irq_set_affinity_locked updated to reflect changes to the API upstream.
Finally, as we have removed the sleep_length member variable of the
tick_sched struct, all changes made by upstream commit ec804bd do not
apply to our tree and have been removed from this merge. Only
kernel/time/tick-sched.c is impacted.
Change-Id: I63b7e0c1354812921c94804e1f3b33d1ad6ee3f1
Signed-off-by: Ian Maund <imaund@codeaurora.org>
commit bb86cf569bbd7ad4dce581a37c7fbd748057e9dc upstream.
When using USB 3.0 pen drive with the [AMD] FCH USB XHCI Controller
[1022:7814], the second hotplugging will experience the USB 3.0 pen
drive is recognized as high-speed device. After bisecting the kernel,
I found the commit number 41e7e056cd
(USB: Allow USB 3.0 ports to be disabled.) causes the bug. After doing
some experiments, the bug can be fixed by avoiding executing the function
hub_usb3_port_disable(). Because the port status with [AMD] FCH USB
XHCI Controlleris [1022:7814] is already in RxDetect
(I tried printing out the port status before setting to Disabled state),
it's reasonable to check the port status before really executing
hub_usb3_port_disable().
Fixes: 41e7e056cd (USB: Allow USB 3.0 ports to be disabled.)
Signed-off-by: Gavin Guo <gavin.guo@canonical.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* commit 'v3.10.40': (203 commits)
Linux 3.10.40
ARC: !PREEMPT: Ensure Return to kernel mode is IRQ safe
drm: cirrus: add power management support
Input: synaptics - add min/max quirk for ThinkPad Edge E431
Input: synaptics - add min/max quirk for ThinkPad T431s, L440, L540, S1 Yoga and X1
lockd: ensure we tear down any live sockets when socket creation fails during lockd_up
dm thin: fix dangling bio in process_deferred_bios error path
dm transaction manager: fix corruption due to non-atomic transaction commit
Skip intel_crt_init for Dell XPS 8700
mtd: sm_ftl: heap corruption in sm_create_sysfs_attributes()
mtd: nuc900_nand: NULL dereference in nuc900_nand_enable()
mtd: atmel_nand: Disable subpage NAND write when using Atmel PMECC
tgafb: fix data copying
gpio: mxs: Allow for recursive enable_irq_wake() call
rtlwifi: rtl8188ee: initialize packet_beacon
rtlwifi: rtl8192se: Fix regression due to commit 1bf4bbb
rtlwifi: rtl8192se: Fix too long disable of IRQs
rtlwifi: rtl8192cu: Fix too long disable of IRQs
rtlwifi: rtl8188ee: Fix too long disable of IRQs
rtlwifi: rtl8723ae: Fix too long disable of IRQs
...
Change-Id: If5388cf980cb123e35e1b29275ba288c89c5aa18
Signed-off-by: Ian Maund <imaund@codeaurora.org>
commit 8ef42ddd9a53b73e6fc3934278710c27f80f324f upstream.
Not all host controller drivers have bus-suspend and bus-resume
methods. When one doesn't, it will cause problems if runtime PM is
enabled in the kernel. The PM core will attempt to suspend the
controller's root hub, the suspend will fail because there is no
bus-suspend routine, and a -EBUSY error code will be returned to the
PM core. This will cause the suspend attempt to be repeated shortly
thereafter, in a never-ending loop.
Part of the problem is that the original error code -ENOENT gets
changed to -EBUSY in usb_runtime_suspend(), on the grounds that the PM
core will interpret -ENOENT as meaning that the root hub has gotten
into a runtime-PM error state. While this change is appropriate for
real USB devices, it's not such a good idea for a root hub. In fact,
considering the root hub to be in a runtime-PM error state would not
be far from the truth. Therefore this patch updates
usb_runtime_suspend() so that it adjusts error codes only for
non-root-hub devices.
Furthermore, the patch attempts to prevent the problem from occurring
in the first place by not enabling runtime PM by default for root hubs
whose host controller driver doesn't have bus_suspend and bus_resume
methods.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reported-by: Will Deacon <will.deacon@arm.com>
Tested-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is a possibility of root hub usb device being
freed as part of controller driver unbind and hub
thread trying to access root hub usb device. Hence
increment the usb device reference count before
accessing it by hub thread.
CRs-Fixed: 671581
Change-Id: Icf1297452e55a4ca0acd67075320f7a32929a1b3
Signed-off-by: Hemant Kumar <hemantk@codeaurora.org>
commit 6aec044cc2f5670cf3b143c151c8be846499bd15 upstream.
When a driver doesn't have pre_reset, post_reset, or reset_resume
methods, the USB core unbinds that driver when its device undergoes a
reset or a reset-resume, and then rebinds it afterward.
The existing straightforward implementation can lead to problems,
because each interface gets unbound and rebound before the next
interface is handled. If a driver claims additional interfaces, the
claim may fail because the old binding instance may still own the
additional interface when the new instance tries to claim it.
This patch fixes the problem by first unbinding all the interfaces
that are marked (i.e., their needs_binding flag is set) and then
rebinding all of them.
The patch also makes the helper functions in driver.c a little more
uniform and adjusts some out-of-date comments.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reported-and-tested-by: "Poulain, Loic" <loic.poulain@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The following commits have been reverted from this merge, as they are
known to introduce new bugs and are currently incompatible with our
audio implementation. Investigation of these commits is ongoing, and
they are expected to be brought in at a later time:
86e6de7 ALSA: compress: fix drain calls blocking other compress functions (v6)
16442d4 ALSA: compress: fix drain calls blocking other compress functions
This merge commit also includes a change in block, necessary for
compilation. Upstream has modified elevator_init_fn to prevent race
conditions, requring updates to row_init_queue and test_init_queue.
* commit 'v3.10.28': (1964 commits)
Linux 3.10.28
ARM: 7938/1: OMAP4/highbank: Flush L2 cache before disabling
drm/i915: Don't grab crtc mutexes in intel_modeset_gem_init()
serial: amba-pl011: use port lock to guard control register access
mm: Make {,set}page_address() static inline if WANT_PAGE_VIRTUAL
md/raid5: Fix possible confusion when multiple write errors occur.
md/raid10: fix two bugs in handling of known-bad-blocks.
md/raid10: fix bug when raid10 recovery fails to recover a block.
md: fix problem when adding device to read-only array with bitmap.
drm/i915: fix DDI PLLs HW state readout code
nilfs2: fix segctor bug that causes file system corruption
thp: fix copy_page_rep GPF by testing is_huge_zero_pmd once only
ftrace/x86: Load ftrace_ops in parameter not the variable holding it
SELinux: Fix possible NULL pointer dereference in selinux_inode_permission()
writeback: Fix data corruption on NFS
hwmon: (coretemp) Fix truncated name of alarm attributes
vfs: In d_path don't call d_dname on a mount point
staging: comedi: adl_pci9111: fix incorrect irq passed to request_irq()
staging: comedi: addi_apci_1032: fix subdevice type/flags bug
mm/memory-failure.c: recheck PageHuge() after hugetlb page migrate successfully
GFS2: Increase i_writecount during gfs2_setattr_chown
perf/x86/amd/ibs: Fix waking up from S3 for AMD family 10h
perf scripting perl: Fix build error on Fedora 12
ARM: 7815/1: kexec: offline non panic CPUs on Kdump panic
Linux 3.10.27
sched: Guarantee new group-entities always have weight
sched: Fix hrtimer_cancel()/rq->lock deadlock
sched: Fix cfs_bandwidth misuse of hrtimer_expires_remaining
sched: Fix race on toggling cfs_bandwidth_used
x86, fpu, amd: Clear exceptions in AMD FXSAVE workaround
netfilter: nf_nat: fix access to uninitialized buffer in IRC NAT helper
SCSI: sd: Reduce buffer size for vpd request
intel_pstate: Add X86_FEATURE_APERFMPERF to cpu match parameters.
mac80211: move "bufferable MMPDU" check to fix AP mode scan
ACPI / Battery: Add a _BIX quirk for NEC LZ750/LS
ACPI / TPM: fix memory leak when walking ACPI namespace
mfd: rtsx_pcr: Disable interrupts before cancelling delayed works
clk: exynos5250: fix sysmmu_mfc{l,r} gate clocks
clk: samsung: exynos5250: Add CLK_IGNORE_UNUSED flag for the sysreg clock
clk: samsung: exynos4: Correct SRC_MFC register
clk: clk-divider: fix divisor > 255 bug
ahci: add PCI ID for Marvell 88SE9170 SATA controller
parisc: Ensure full cache coherency for kmap/kunmap
drm/nouveau/bios: make jump conditional
ARM: shmobile: mackerel: Fix coherent DMA mask
ARM: shmobile: armadillo: Fix coherent DMA mask
ARM: shmobile: kzm9g: Fix coherent DMA mask
ARM: dts: exynos5250: Fix MDMA0 clock number
ARM: fix "bad mode in ... handler" message for undefined instructions
ARM: fix footbridge clockevent device
net: Loosen constraints for recalculating checksum in skb_segment()
bridge: use spin_lock_bh() in br_multicast_set_hash_max
netpoll: Fix missing TXQ unlock and and OOPS.
net: llc: fix use after free in llc_ui_recvmsg
virtio-net: fix refill races during restore
virtio_net: don't leak memory or block when too many frags
virtio-net: make all RX paths handle errors consistently
virtio_net: fix error handling for mergeable buffers
vlan: Fix header ops passthru when doing TX VLAN offload.
net: rose: restore old recvmsg behavior
rds: prevent dereference of a NULL device
ipv6: always set the new created dst's from in ip6_rt_copy
net: fec: fix potential use after free
hamradio/yam: fix info leak in ioctl
drivers/net/hamradio: Integer overflow in hdlcdrv_ioctl()
net: inet_diag: zero out uninitialized idiag_{src,dst} fields
ip_gre: fix msg_name parsing for recvfrom/recvmsg
net: unix: allow bind to fail on mutex lock
ipv6: fix illegal mac_header comparison on 32bit
netvsc: don't flush peers notifying work during setting mtu
tg3: Initialize REG_BASE_ADDR at PCI config offset 120 to 0
net: unix: allow set_peek_off to fail
net: drop_monitor: fix the value of maxattr
ipv6: don't count addrconf generated routes against gc limit
packet: fix send path when running with proto == 0
virtio: delete napi structures from netdev before releasing memory
macvtap: signal truncated packets
tun: update file current position
macvtap: update file current position
macvtap: Do not double-count received packets
rds: prevent BUG_ON triggered on congestion update to loopback
net: do not pretend FRAGLIST support
IPv6: Fixed support for blackhole and prohibit routes
HID: Revert "Revert "HID: Fix logitech-dj: missing Unifying device issue""
gpio-rcar: R-Car GPIO IRQ share interrupt
clocksource: em_sti: Set cpu_possible_mask to fix SMP broadcast
irqchip: renesas-irqc: Fix irqc_probe error handling
Linux 3.10.26
sh: add EXPORT_SYMBOL(min_low_pfn) and EXPORT_SYMBOL(max_low_pfn) to sh_ksyms_32.c
ext4: fix bigalloc regression
arm64: Use Normal NonCacheable memory for writecombine
arm64: Do not flush the D-cache for anonymous pages
arm64: Avoid cache flushing in flush_dcache_page()
ARM: KVM: arch_timers: zero CNTVOFF upon return to host
ARM: hyp: initialize CNTVOFF to zero
clocksource: arch_timer: use virtual counters
arm64: Remove unused cpu_name ascii in arch/arm64/mm/proc.S
arm64: dts: Reserve the memory used for secondary CPU release address
arm64: check for number of arguments in syscall_get/set_arguments()
arm64: fix possible invalid FPSIMD initialization state
...
Change-Id: Ia0e5d71b536ab49ec3a1179d59238c05bdd03106
Signed-off-by: Ian Maund <imaund@codeaurora.org>
commit 140e3026a57ab7d830dab2f2c57796c222db0ea9 upstream.
Commit 9df89d85b407690afa46ddfbccc80bec6869971d "usbcore: set
lpm_capable field for LPM capable root hubs" was created under the
assumption that all USB host controllers should have USB 3.0 Link PM
enabled for all devices under the hosts.
Unfortunately, that's not the case. The xHCI driver relies on knowledge
of the host hardware scheduler to calculate the LPM U1/U2 timeout
values, and it only sets lpm_capable to one for Intel host controllers
(that have the XHCI_LPM_SUPPORT quirk set).
When LPM is enabled for some Fresco Logic hosts, it causes failures with
a AgeStar 3UBT USB 3.0 hard drive dock:
Jan 11 13:59:03 sg-laptop kernel: usb 3-1: new SuperSpeed USB device number 2 using xhci_hcd
Jan 11 13:59:03 sg-laptop kernel: usb 3-1: Set SEL for device-initiated U1 failed.
Jan 11 13:59:08 sg-laptop kernel: usb 3-1: Set SEL for device-initiated U2 failed.
Jan 11 13:59:08 sg-laptop kernel: usb-storage 3-1:1.0: USB Mass Storage device detected
Jan 11 13:59:08 sg-laptop mtp-probe[613]: checking bus 3, device 2: "/sys/devices/pci0000:00/0000:00:1c.3/0000:04:00.0/usb3/3-1"
Jan 11 13:59:08 sg-laptop mtp-probe[613]: bus: 3, device: 2 was not an MTP device
Jan 11 13:59:08 sg-laptop kernel: scsi6 : usb-storage 3-1:1.0
Jan 11 13:59:13 sg-laptop kernel: usb 3-1: Set SEL for device-initiated U1 failed.
Jan 11 13:59:18 sg-laptop kernel: usb 3-1: Set SEL for device-initiated U2 failed.
Jan 11 13:59:18 sg-laptop kernel: usbcore: registered new interface driver usb-storage
Jan 11 13:59:40 sg-laptop kernel: usb 3-1: reset SuperSpeed USB device number 2 using xhci_hcd
Jan 11 13:59:41 sg-laptop kernel: usb 3-1: device descriptor read/8, error -71
Jan 11 13:59:41 sg-laptop kernel: usb 3-1: reset SuperSpeed USB device number 2 using xhci_hcd
Jan 11 13:59:46 sg-laptop kernel: usb 3-1: device descriptor read/8, error -110
Jan 11 13:59:46 sg-laptop kernel: scsi 6:0:0:0: Device offlined - not ready after error recovery
Jan 11 13:59:46 sg-laptop kernel: usb 3-1: USB disconnect, device number 2
lspci for the affected host:
04:00.0 0c03: 1b73:1000 (rev 04) (prog-if 30 [XHCI])
Subsystem: 1043:1039
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at dd200000 (32-bit, non-prefetchable) [size=64K]
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [80] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <2us, L1 <32us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 unlimited, L1 unlimited
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
Kernel driver in use: xhci_hcd
Kernel modules: xhci_hcd
The commit was backported to stable kernels, and will need to be
reverted there as well.
Signed-off-by: Sarah Sharp <sarah.a.sharp@intel.com>
Reported-by: Sergey Galanov <sergey.e.galanov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 83e83ecb79a8225e79bc8e54e9aff3e0e27658a2 upstream.
There is no need to skip querying the config and string descriptors for
unauthorized WUSB devices when usb_new_device is called. It is allowed
by WUSB spec. The only action that needs to be delayed until
authorization time is the set config. This change allows user mode
tools to see the config and string descriptors earlier in enumeration
which is needed for some WUSB devices to function properly on Android
systems. It also reduces the amount of divergent code paths needed
for WUSB devices.
Signed-off-by: Thomas Pugliese <thomas.pugliese@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 543d7784b07ffd16cc82a9cb4e1e0323fd0040f1 upstream.
There is a race in the hub driver between hub_disconnect() and
recursively_mark_NOTATTACHED(). This race can be triggered if the
driver is unbound from a device at the same time as the bus's root hub
is removed. When the race occurs, it can cause an oops:
BUG: unable to handle kernel NULL pointer dereference at 0000015c
IP: [<c16d5fb0>] recursively_mark_NOTATTACHED+0x20/0x60
Call Trace:
[<c16d5fc4>] recursively_mark_NOTATTACHED+0x34/0x60
[<c16d5fc4>] recursively_mark_NOTATTACHED+0x34/0x60
[<c16d5fc4>] recursively_mark_NOTATTACHED+0x34/0x60
[<c16d5fc4>] recursively_mark_NOTATTACHED+0x34/0x60
[<c16d6082>] usb_set_device_state+0x92/0x120
[<c16d862b>] usb_disconnect+0x2b/0x1a0
[<c16dd4c0>] usb_remove_hcd+0xb0/0x160
[<c19ca846>] ? _raw_spin_unlock_irqrestore+0x26/0x50
[<c1704efc>] ehci_mid_remove+0x1c/0x30
[<c1704f26>] ehci_mid_stop_host+0x16/0x30
[<c16f7698>] penwell_otg_work+0xd28/0x3520
[<c19c945b>] ? __schedule+0x39b/0x7f0
[<c19cdb9d>] ? sub_preempt_count+0x3d/0x50
[<c125e97d>] process_one_work+0x11d/0x3d0
[<c19c7f4d>] ? mutex_unlock+0xd/0x10
[<c125e0e5>] ? manage_workers.isra.24+0x1b5/0x270
[<c125f009>] worker_thread+0xf9/0x320
[<c19ca846>] ? _raw_spin_unlock_irqrestore+0x26/0x50
[<c125ef10>] ? rescuer_thread+0x2b0/0x2b0
[<c1264ac4>] kthread+0x94/0xa0
[<c19d0f77>] ret_from_kernel_thread+0x1b/0x28
[<c1264a30>] ? kthread_create_on_node+0xc0/0xc0
One problem is that recursively_mark_NOTATTACHED() uses the intfdata
value and hub->hdev->maxchild while hub_disconnect() is clearing them.
Another problem is that it uses hub->ports[i] while the port device is
being released.
To fix this race, we need to hold the device_state_lock while
hub_disconnect() changes the values. (Note that usb_disconnect()
and hub_port_connect_change() already acquire this lock at similar
critical times during a USB device's life cycle.) We also need to
remove the port devices after maxchild has been set to 0, instead of
before.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reported-by: "Du, Changbin" <changbinx.du@intel.com>
Tested-by: "Du, Changbin" <changbinx.du@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
HCD_OLD_ENUM HCD flag is introduced to use old (or short) enumeration
scheme for the devices attached on the corresponding USB bus. The old
enumeration scheme is used by the MSM HSIC controller to avoid multiple
reset during enumeration. This is useful when a known device is attached
to the USB bus, which is the case with MSM HSIC. When a HSIC HUB is
connected, any device can be connected on the HSIC USB bus. The new
enumeration scheme supports wide variety of USB devices. Hence limit
the old enumeration scheme request of a HCD to only root ports.
Change-Id: I6035c2a766787819eb8d0e1fa774e0c79d6e958b
Signed-off-by: Pavankumar Kondeti <pkondeti@codeaurora.org>
commit 2d51f3cd11f414c56a87dc018196b85fd50b04a4 upstream.
This patch adds a check for USB_STATE_NOTATTACHED to the
hub_port_warm_reset_required() workaround for ports that end up in
Compliance Mode in hub_events() when trying to decide which reset
function to use. Trying to call usb_reset_device() with a NOTATTACHED
device will just fail and leave the port broken.
Signed-off-by: Julius Werner <jwerner@chromium.org>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e92aee330837e4911553761490a8fb843f2053a6 upstream.
This patch adds the Port Reset Change flag to the set of bits that are
preemptively cleared on init/resume of a hub. In theory this bit should
never be set unexpectedly... in practice it can still happen if BIOS,
SMM or ACPI code plays around with USB devices without cleaning up
correctly. This is especially dangerous for XHCI root hubs, which don't
generate any more Port Status Change Events until all change bits are
cleared, so this is a good precaution to have (similar to how it's
already done for the Warm Port Reset Change flag).
Signed-off-by: Julius Werner <jwerner@chromium.org>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb_hub_to_struct_hub() can return NULL in some unlikely cases.
Add checks where appropriate and handle error case properly.
CRs-Fixed: 562361
Change-Id: I09a11a08a8fa71ca6ecdb3a42ba0e6c2503ee0c0
Signed-off-by: Mayank Rana <mrana@codeaurora.org>
commit 9df89d85b407690afa46ddfbccc80bec6869971d upstream.
This patch sets the lpm_capable field for root hubs with LPM capabilities.
Signed-off-by: Xenia Ragiadakou <burzalodowa@gmail.com>
Reported-by: Martin MOKREJS <mmokrejs@gmail.com>
Suggested-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e58547eb9561a8a72d46e2d411090a614d33ac0e upstream.
Ignoring usb_hub_create_port_device() errors cause later NULL pointer
deference when uninitialized hub->ports[i] entries are dereferenced
after port memory allocation error.
Signed-off-by: Krzysztof Mazur <krzysiek@podlesie.net>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d0308d4b6b02597f39fc31a9bddf7bb3faad5622 upstream.
If the hub_configure() fails after setting the hdev->maxchild
the hub->ports might be NULL or point to uninitialized kzallocated
memory causing NULL pointer dereference in hub_quiesce() during cleanup.
Now after such error the hdev->maxchild is set to 0 to avoid cleanup
of uninitialized ports.
Signed-off-by: Krzysztof Mazur <krzysiek@podlesie.net>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb_hub_to_struct_hub() can return NULL in some unlikely cases.
Add checks where appropriate, or pass the hub pointer as an additional
argument if it's known to be valid.
The places it makes sense to check usb_hub_to_struct_hub()
are picked based on feedback from Alan Stern.
Change-Id: I10103d23876934c7783e241f5a4a07587860822d
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Git-commit: 41341261aa1707b49f937ba2c20d1a0daa5afac3
Git-repo: git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
[mrana@codeaurora.org: resolve trivial merge conflicts]
CRs-Fixed: 562361
Signed-off-by: Mayank Rana <mrana@codeaurora.org>
Current driver is accessing the buffer memory after it is freed.
This could result in getting wrong value and might could cause
memory corruption. Hence fix this issue by taking idvendor value
into a variable before freeing it.
CRs-Fixed: 550211
Change-Id: I271dbf3518e7b6e0d30c684bd05c835945de0950
Signed-off-by: Vijayavardhan Vennapusa <vvreddy@codeaurora.org>
commit 98a4f1ff7bea8002ab79d6776e30d27932e88244 upstream.
The pm qos NO_POWER_OFF flag is checked twice during usb device suspend
to see if the usb port power off condition is met. This is redundant and
also will prevent the port from being powered off if the NO_POWER_OFF
flag is changed to 1 from 0 after the device was already suspended.
More detail in the following link.
http://marc.info/?l=linux-usb&m=136543949130865&w=2
This patch should be backported to kernels as old as 3.7, that
contain the commit f7ac7787ad "usb/acpi:
Use ACPI methods to power off ports."
Signed-off-by: Lan Tianyu <tianyu.lan@intel.com>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit aa5ceae24bf8dff1d6fe87c6c4b08e69c6d33550 upstream.
The hub driver's usb_port_suspend() routine doesn't handle errors
related to Link Power Management properly. It always returns failure,
it doesn't try to clean up the wakeup setting, (in the case of system
sleep) it doesn't try to go ahead with the port suspend regardless,
and it doesn't try to apply the new power-off mechanism.
This patch fixes these problems.
Note: Sarah fixed this patch to apply against 3.11, since the original
commit (4fae6f0fa86f92e6bc7429371b1e177ad0aaac66 "USB: handle LPM errors
during device suspend correctly") called usb_disable_remote_wakeup,
which won't be added until 3.12.
This patch should be backported to kernels as old as 3.5, that
contain the commit 8306095fd2 "USB:
Disable USB 3.0 LPM in critical sections.". There will be merge
conflicts, since LTM wasn't added until 3.6.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit b56602118a72e7cdf1d1083af99a912b3fd23f62.
ISP1763A is dropped.
Change-Id: Ia100a380afd64ae9cf0d211761ae3d11f78107a5
Signed-off-by: Manu Gautam <mgautam@codeaurora.org>
This reverts commit cc1e338bd2819dc52e6e5ec2e576517bc9089662.
PEHCI no longer supported on MSMs.
Change-Id: I6974fb747138f1ad1936d8468486f00e60e377a2
Signed-off-by: Manu Gautam <mgautam@codeaurora.org>
There could be race condition between h/w initiating sof
(start of frames) and finishing port reset. This can
cause hsic phy lockup, which results in enumeration failure.
Avoid this race condition by:
1. Moving to the old enumeration sequence where set_address is
initiated before get_device descriptor. This results in one
port reset instead of two port resets.
2. Halt usb controller before initiating port reset and start it after
port reset is complete. This is tricky because PORT_RESET bit
automatically clears when h/w completes the reset and failure to
start the controller within 3ms causes the peripheral device to
suspend resulting in enumeration failure. Hence, after setting
port reset bit forcefully drive strobe/data lines to reset using
ulpi interface and once port reset is complete, disable forceful
reset and start the controller in atomic context.
CRs-fixed: 364458, 359930
Change-Id: I49a2eac8043eb3001956c7ee9ead2c3a901524db
Signed-off-by: Vamsi Krishna <vskrishn@codeaurora.org>
1. Add OTG PET device to TPL. OTG device shall support this
device for allowing compliance automated testing.
2. Add otg_srp_reqd filed to gadget. OTG B-device shall enable
this flag when OTG PET (Protocol and Electrical Tester) that
acts as A-device sends Set Feature TEST_MODE with wIndex high
byte value = 0x06. OTG PET expects B-device to initiate SRP
after the end of current session.
3. Add otg_vbus_off to usb_bus. USB core enables this flag
when OTG PET enumerates with bcdDevice[0] field in its Device
Descriptor is equal to 1. OTG PET expects A-device to turn off
the VBUS with in 5 sec of its disconnection which allows it to
initiate SRP.
3. Add support to identify OTG PET and start HNP quickly.
Change-Id: Ib1f4d835d00ca29ff8f980c94d75a3890507dedc
Signed-off-by: Pavankumar Kondeti <pkondeti@codeaurora.org>
Signed-off-by: Vijayavardhan Vennapusa <vvreddy@codeaurora.org>
During enumeration of a device, USB core first resets parent
HUB's port then issues a GetDescriptor request. After this USB
core again issues a RESET followed by SetAddress and
GetDescriptor requests.
Some HSET Test devices, needed for USB-IF host compliance tests,
fail to enumerate due to change in speed after second reset.
Hence, avoid issuing a second RESET while dealing with a HSET
Test device.
Change-Id: I4084da5381677050c785b7d11763db9b3f5635a8
CRs-Fixed: 269265
Signed-off-by: Manu Gautam <mgautam@codeaurora.org>
hnp_supported flag is set for a USB bus when a HNP supported device
is connected on OTG port. This flag is used to schedule and cancel
HNP polling work. Clear this flag upon device disconnect. Otherwise
HNP polling work is scheduled when another device is connected on OTG
port though the device is not a OTG device.
Change-Id: Ib0cdb165a0a8e4f59464a9cf8a433377172588e1
Signed-off-by: Pavankumar Kondeti <pkondeti@codeaurora.org>
OTG specification mandates an explicit message like "HUB device
not supported" to be displayed to user if host does not support
HUB class peripherals. Distinguish HUB class peripheral from
other unsupported peripherals and send the corresponding event.
Change-Id: I2b5cfa0b19d2172b21c2a4036dd57bbf1356adef
Signed-off-by: Pavankumar Kondeti <pkondeti@codeaurora.org>
Host controller driver may register root hub during HNP while
becoming B-Host. Remove delays involved in debouncing and
applying port power. This helps B-device to meet TB_ACON_BSE0
timing parameter and A-device will not find bus idle for longer
than TA_BIDL_ADIS.
Change-Id: Ib5df6417b10c6bde5bf5b9fd688c13a305ce7a4d
Signed-off-by: Pavankumar Kondeti <pkondeti@codeaurora.org>
ADP (Attach Detection Protocol) is introduced to detect remote
device presence with out applying power on VBUS. A-device
performs ADP probing and applies power on VBUS when remote device
is attached. B-device perform ADP sensing and request session
via SRP when remote device is attached. B-device can claim their
ADP capability in OTG descriptor.
HNP polling is introduced for peripheral device to notify its wish
to become host. Host device polls (i.e execute GetStatus())
peripheral and suspend the bus when peripheral returns host_request
True.
a_alt_hnp_support feature is obsoleted and a_hnp_support feature is
limited to legacy B-devices i.e compliant to older than Rev 2.0 spec.
Change-Id: I1a3c9d35b5e77282da8a47bafd8bc0cc4e5ae1fa
Signed-off-by: Pavankumar Kondeti <pkondeti@qualcomm.com>
Internal HUB present in ISP1763A sometimes returns 2 bytes of
data in response to GetPortStatus request. This is observed during
mutiple iterations of suspend/resume with ISP1763A.
As part of workaround retry GetPortStatus request if HUB
returns 2 bytes.
Change-Id: Iae28abe0d9e082e4741e585e085d9fb9e6e7594a
Signed-off-by: Manu Gautam <mgautam@codeaurora.org>
A user can initiate host compliance tests or suspend/resume
requests over the ISP1763A USB Host controller by issuing
IOCTLs on the pehci device.
Add necessary changes in USB core to support these requests.
These changes are taken from the 1.0.6.0 version of ST-E pehci
driver present at: http://www.box.net/shared/static/o5esh7r14q.zip
along with the fixes for checkpatch errors and removal of unused
variables.
Change-Id: Ic6b175bcd3104730bac90278456e3bfbcd507801
Signed-off-by: Manu Gautam <mgautam@codeaurora.org>
commit 481f2d4f89f87a0baa26147f323380e31cfa7c44 upstream.
The USB hub driver's event handler contains a check to catch SuperSpeed
devices that transitioned into the SS.Inactive state and tries to fix
them with a reset. It decides whether to do a plain hub port reset or
call the usb_reset_device() function based on whether there was a device
attached to the port.
However, there are device/hub combinations (found with a JetFlash
Transcend mass storage stick (8564:1000) on the root hub of an Intel
LynxPoint PCH) which can transition to the SS.Inactive state on
disconnect (and stay there long enough for the host to notice). In this
case, above-mentioned reset check will call usb_reset_device() on the
stale device data structure. The kernel will send pointless LPM control
messages to the no longer connected device address and can even cause
several 5 second khubd stalls on some (buggy?) host controllers, before
finally accepting the device's fate amongst a flurry of error messages.
This patch makes the choice of reset dependent on the port status that
has just been read from the hub in addition to the existence of an
in-kernel data structure for the device, and only proceeds with the more
extensive reset if both are valid.
Signed-off-by: Julius Werner <jwerner@chromium.org>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e583d9db9960cf40e0bc8afee4946baa9d71596e upstream.
The hub driver was recently changed to use "global" suspend for system
suspend transitions on non-SuperSpeed buses. This means that we don't
suspend devices individually by setting the suspend feature on the
upstream hub port; instead devices all go into suspend automatically
when the root hub stops transmitting packets. The idea was to save
time and to avoid certain kinds of wakeup races.
Now it turns out that many hubs are buggy; they don't relay wakeup
requests from a downstream port to their upstream port if the
downstream port's suspend feature is not set (depending on the speed
of the downstream port, whether or not the hub is enabled for remote
wakeup, and possibly other factors).
We can't have hubs dropping wakeup requests. Therefore this patch
goes partway back to the old policy: It sets the suspend feature for a
port if the device attached to that port or any of its descendants is
enabled for wakeup. People will still be able to benefit from the
time savings if they don't care about wakeup and leave it disabled on
all their devices.
In order to accomplish this, the patch adds a new field to the usb_hub
structure: wakeup_enabled_descendants is a count of how many devices
below a suspended hub are enabled for remote wakeup. A corresponding
new subroutine determines the number of wakeup-enabled devices at or
below an arbitrary suspended USB device.
This should be applied to the 3.10 stable kernel.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reported-and-tested-by: Toralf Förster <toralf.foerster@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2c7b871b9102c497ba8f972aa5d38532f05b654d upstream.
Control transfers have both IN and OUT (or SETUP) packets, so when
clearing TT buffers for a control transfer it's necessary to send
two HUB_CLEAR_TT_BUFFER requests to the hub.
Signed-off-by: William Gulland <wgulland@google.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Luca Stefani
Alan Stern
Oliver Neukum
Kaushal Kumar
Felipe Balbi
Ian Maund
Lu Baolu
Shen Guang
Joe Lawrence
Greg Kroah-Hartman
Roger Quadros
Pratyush Anand
Gavin Guo
Hemant Kumar
Sarah Sharp
Thomas Pugliese
Pavankumar Kondeti
Julius Werner
Mayank Rana
Xenia Ragiadakou
Krzysztof Mazur
Mathias Nyman
Vijayavardhan Vennapusa
Lan Tianyu
Manu Gautam
Vamsi Krishna
Pavankumar Kondeti
William Gulland