/* Copyright (c) 2011-2015, The Linux Foundation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 and * only version 2 as published by the Free Software Foundation. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. */ /* Smart-Peripheral-Switch (SPS) API. */ #ifndef _SPS_H_ #define _SPS_H_ #include /* u32 */ #if defined(CONFIG_PHYS_ADDR_T_64BIT) || defined(CONFIG_ARM_LPAE) /* Returns upper 4bits of 36bits physical address */ #define SPS_GET_UPPER_ADDR(addr) ((addr & 0xF00000000ULL) >> 32) /* Returns 36bits physical address from 32bit address & * flags word */ #define DESC_FULL_ADDR(flags, addr) ((((phys_addr_t)flags & 0xF) << 32) | addr) /* Returns flags word with flags and 4bit upper address * from flags and 36bit physical address */ #define DESC_FLAG_WORD(flags, addr) (((addr & 0xF00000000ULL) >> 32) | flags) #else #define SPS_GET_UPPER_ADDR(addr) (0) #define DESC_FULL_ADDR(flags, addr) (addr) #define DESC_FLAG_WORD(flags, addr) (flags) #endif /* Returns upper 4bits of 36bits physical address from * flags word */ #define DESC_UPPER_ADDR(flags) ((flags & 0xF)) /* Returns lower 32bits of 36bits physical address */ #define SPS_GET_LOWER_ADDR(addr) ((u32)(addr & 0xFFFFFFFF)) /* SPS device handle indicating use of system memory */ #define SPS_DEV_HANDLE_MEM (~0x0ul>>1) /* SPS device handle indicating use of BAM-DMA */ /* SPS device handle invalid value */ #define SPS_DEV_HANDLE_INVALID ((unsigned long)0) /* BAM invalid IRQ value */ #define SPS_IRQ_INVALID 0 /* Invalid address value */ #define SPS_ADDR_INVALID ((unsigned long)0) /* Invalid peripheral device enumeration class */ #define SPS_CLASS_INVALID ((unsigned long)-1) /* * This value specifies different configurations for an SPS connection. * A non-default value instructs the SPS driver to search for the configuration * in the fixed connection mapping table. */ #define SPS_CONFIG_DEFAULT 0 /* * This value instructs the SPS driver to use the default BAM-DMA channel * threshold */ #define SPS_DMA_THRESHOLD_DEFAULT 0 /* Flag bits supported by SPS hardware for struct sps_iovec */ #define SPS_IOVEC_FLAG_INT 0x8000 /* Generate interrupt */ #define SPS_IOVEC_FLAG_EOT 0x4000 /* Generate end-of-transfer indication */ #define SPS_IOVEC_FLAG_EOB 0x2000 /* Generate end-of-block indication */ #define SPS_IOVEC_FLAG_NWD 0x1000 /* notify when done */ #define SPS_IOVEC_FLAG_CMD 0x0800 /* command descriptor */ #define SPS_IOVEC_FLAG_LOCK 0x0400 /* pipe lock */ #define SPS_IOVEC_FLAG_UNLOCK 0x0200 /* pipe unlock */ #define SPS_IOVEC_FLAG_IMME 0x0100 /* immediate command descriptor */ #define SPS_IOVEC_FLAG_NO_SUBMIT 0x0020 /* Do not submit descriptor to HW */ #define SPS_IOVEC_FLAG_DEFAULT 0x0010 /* Use driver default */ /* Maximum descriptor/iovec size */ #define SPS_IOVEC_MAX_SIZE (32 * 1024 - 1) /* 32K-1 bytes due to HW limit */ /* BAM device options flags */ /* * BAM will be configured and enabled at boot. Otherwise, BAM will be * configured and enabled when first pipe connect occurs. */ #define SPS_BAM_OPT_ENABLE_AT_BOOT 1UL /* BAM IRQ is disabled */ #define SPS_BAM_OPT_IRQ_DISABLED (1UL << 1) /* BAM peripheral is a BAM-DMA */ #define SPS_BAM_OPT_BAMDMA (1UL << 2) /* BAM IRQ is registered for apps wakeup */ #define SPS_BAM_OPT_IRQ_WAKEUP (1UL << 3) /* Ignore external block pipe reset */ #define SPS_BAM_NO_EXT_P_RST (1UL << 4) /* Don't enable local clock gating */ #define SPS_BAM_NO_LOCAL_CLK_GATING (1UL << 5) /* Don't enable writeback cancel*/ #define SPS_BAM_CANCEL_WB (1UL << 6) /* Confirm resource status before access BAM*/ #define SPS_BAM_RES_CONFIRM (1UL << 7) /* Verify Low Memory status */ #define SPS_BAM_ATMC_MEM (1UL << 8) /* BAM device management flags */ /* BAM global device control is managed remotely */ #define SPS_BAM_MGR_DEVICE_REMOTE 1UL /* BAM device supports multiple execution environments */ #define SPS_BAM_MGR_MULTI_EE (1UL << 1) /* BAM pipes are *not* allocated locally */ #define SPS_BAM_MGR_PIPE_NO_ALLOC (1UL << 2) /* BAM pipes are *not* configured locally */ #define SPS_BAM_MGR_PIPE_NO_CONFIG (1UL << 3) /* BAM pipes are *not* controlled locally */ #define SPS_BAM_MGR_PIPE_NO_CTRL (1UL << 4) /* "Globbed" management properties */ #define SPS_BAM_MGR_NONE \ (SPS_BAM_MGR_DEVICE_REMOTE | SPS_BAM_MGR_PIPE_NO_ALLOC | \ SPS_BAM_MGR_PIPE_NO_CONFIG | SPS_BAM_MGR_PIPE_NO_CTRL) #define SPS_BAM_MGR_LOCAL 0 #define SPS_BAM_MGR_LOCAL_SHARED SPS_BAM_MGR_MULTI_EE #define SPS_BAM_MGR_REMOTE_SHARED \ (SPS_BAM_MGR_DEVICE_REMOTE | SPS_BAM_MGR_MULTI_EE | \ SPS_BAM_MGR_PIPE_NO_ALLOC) #define SPS_BAM_MGR_ACCESS_MASK SPS_BAM_MGR_NONE /* * BAM security configuration */ #define SPS_BAM_NUM_EES 4 #define SPS_BAM_SEC_DO_NOT_CONFIG 0 #define SPS_BAM_SEC_DO_CONFIG 0x0A434553 /* BAM pipe selection */ #define SPS_BAM_PIPE(n) (1UL << (n)) /* This enum specifies the operational mode for an SPS connection */ enum sps_mode { SPS_MODE_SRC = 0, /* end point is the source (producer) */ SPS_MODE_DEST, /* end point is the destination (consumer) */ }; /* * This enum is a set of bit flag options for SPS connection. * The enums should be OR'd together to create the option set * for the SPS connection. */ enum sps_option { /* * Options to enable specific SPS hardware interrupts. * These bit flags are also used to indicate interrupt source * for the SPS_EVENT_IRQ event. */ SPS_O_DESC_DONE = 0x00000001, /* Descriptor processed */ SPS_O_INACTIVE = 0x00000002, /* Inactivity timeout */ SPS_O_WAKEUP = 0x00000004, /* Peripheral wake up */ SPS_O_OUT_OF_DESC = 0x00000008,/* Out of descriptors */ SPS_O_ERROR = 0x00000010, /* Error */ SPS_O_EOT = 0x00000020, /* End-of-transfer */ SPS_O_RST_ERROR = 0x00000040, /* Pipe reset unsucessful error */ SPS_O_HRESP_ERROR = 0x00000080,/* Errorneous Hresponse by AHB MASTER */ /* Options to enable hardware features */ SPS_O_STREAMING = 0x00010000, /* Enable streaming mode (no EOT) */ /* Use MTI/SETPEND instead of BAM interrupt */ SPS_O_IRQ_MTI = 0x00020000, /* NWD bit written with EOT for BAM2BAM producer pipe */ SPS_O_WRITE_NWD = 0x00040000, /* EOT set after pipe SW offset advanced */ SPS_O_LATE_EOT = 0x00080000, /* Options to enable software features */ /* Do not disable a pipe during disconnection */ SPS_O_NO_DISABLE = 0x00800000, /* Transfer operation should be polled */ SPS_O_POLL = 0x01000000, /* Disable queuing of transfer events for the connection end point */ SPS_O_NO_Q = 0x02000000, SPS_O_FLOWOFF = 0x04000000, /* Graceful halt */ /* SPS_O_WAKEUP will be disabled after triggered */ SPS_O_WAKEUP_IS_ONESHOT = 0x08000000, /** * Client must read each descriptor from the FIFO * using sps_get_iovec() */ SPS_O_ACK_TRANSFERS = 0x10000000, /* Connection is automatically enabled */ SPS_O_AUTO_ENABLE = 0x20000000, /* DISABLE endpoint synchronization for config/enable/disable */ SPS_O_NO_EP_SYNC = 0x40000000, /* Allow partial polling duing IRQ mode */ SPS_O_HYBRID = 0x80000000, }; /** * This enum specifies BAM DMA channel priority. Clients should use * SPS_DMA_PRI_DEFAULT unless a specific priority is required. */ enum sps_dma_priority { SPS_DMA_PRI_DEFAULT = 0, SPS_DMA_PRI_LOW, SPS_DMA_PRI_MED, SPS_DMA_PRI_HIGH, }; /* * This enum specifies the ownership of a connection resource. * Remote or shared ownership is only possible/meaningful on the processor * that controls resource. */ enum sps_owner { SPS_OWNER_LOCAL = 0x1, /* Resource is owned by local processor */ SPS_OWNER_REMOTE = 0x2, /* Resource is owned by a satellite processor */ }; /* This enum indicates the event associated with a client event trigger */ enum sps_event { SPS_EVENT_INVALID = 0, SPS_EVENT_EOT, /* End-of-transfer */ SPS_EVENT_DESC_DONE, /* Descriptor processed */ SPS_EVENT_OUT_OF_DESC, /* Out of descriptors */ SPS_EVENT_WAKEUP, /* Peripheral wake up */ SPS_EVENT_FLOWOFF, /* Graceful halt (idle) */ SPS_EVENT_INACTIVE, /* Inactivity timeout */ SPS_EVENT_ERROR, /* Error */ SPS_EVENT_RST_ERROR, /* Pipe Reset unsuccessful */ SPS_EVENT_HRESP_ERROR, /* Errorneous Hresponse by AHB Master*/ SPS_EVENT_MAX, }; /* * This enum specifies the event trigger mode and is an argument for the * sps_register_event() function. */ enum sps_trigger { /* Trigger with payload for callback */ SPS_TRIGGER_CALLBACK = 0, /* Trigger without payload for wait or poll */ SPS_TRIGGER_WAIT, }; /* * This enum indicates the desired halting mechanism and is an argument for the * sps_flow_off() function */ enum sps_flow_off { SPS_FLOWOFF_FORCED = 0, /* Force hardware into halt state */ /* Allow hardware to empty pipe before halting */ SPS_FLOWOFF_GRACEFUL, }; /* * This enum indicates the target memory heap and is an argument for the * sps_mem_alloc() function. */ enum sps_mem { SPS_MEM_LOCAL = 0, /* SPS subsystem local (pipe) memory */ SPS_MEM_UC, /* Microcontroller (ARM7) local memory */ }; /* * This enum indicates a timer control operation and is an argument for the * sps_timer_ctrl() function. */ enum sps_timer_op { SPS_TIMER_OP_CONFIG = 0, SPS_TIMER_OP_RESET, /* SPS_TIMER_OP_START, Not supported by hardware yet */ /* SPS_TIMER_OP_STOP, Not supported by hardware yet */ SPS_TIMER_OP_READ, }; /* * This enum indicates the inactivity timer operating mode and is an * argument for the sps_timer_ctrl() function. */ enum sps_timer_mode { SPS_TIMER_MODE_ONESHOT = 0, /* SPS_TIMER_MODE_PERIODIC, Not supported by hardware yet */ }; /* This enum indicates the cases when callback the user of BAM */ enum sps_callback_case { SPS_CALLBACK_BAM_ERROR_IRQ = 1, /* BAM ERROR IRQ */ SPS_CALLBACK_BAM_HRESP_ERR_IRQ, /* Erroneous HResponse */ SPS_CALLBACK_BAM_TIMER_IRQ, /* Inactivity timer */ SPS_CALLBACK_BAM_RES_REQ, /* Request resource */ SPS_CALLBACK_BAM_RES_REL, /* Release resource */ }; /* * This enum indicates the command type in a command element */ enum sps_command_type { SPS_WRITE_COMMAND = 0, SPS_READ_COMMAND, }; /** * struct msm_sps_platform_data - SPS Platform specific data. * @bamdma_restricted_pipes - Bitmask of pipes restricted from local use. * */ struct msm_sps_platform_data { u32 bamdma_restricted_pipes; }; /** * This data type corresponds to the native I/O vector (BAM descriptor) * supported by SPS hardware * * @addr - Buffer physical address. * @size - Buffer size in bytes. * @flags -Flag bitmask (see SPS_IOVEC_FLAG_ #defines). * */ struct sps_iovec { u32 addr; u32 size:16; u32 flags:16; }; /** * This data type corresponds to the native Command Element * supported by SPS hardware * * @addr - register address. * @command - command type. * @data - for write command: content to be written into peripheral register. * for read command: dest addr to write peripheral register value to. * @mask - register mask. * @reserved - for future usage. * */ struct sps_command_element { u32 addr:24; u32 command:8; u32 data; u32 mask; u32 reserved; }; /* * BAM device's security configuation */ struct sps_bam_pipe_sec_config_props { u32 pipe_mask; u32 vmid; }; struct sps_bam_sec_config_props { /* Per-EE configuration - This is a pipe bit mask for each EE */ struct sps_bam_pipe_sec_config_props ees[SPS_BAM_NUM_EES]; }; /** * This struct defines a BAM device. The client must memset() this struct to * zero before writing device information. A value of zero for uninitialized * values will instruct the SPS driver to use general defaults or * hardware/BIOS supplied values. * * * @options - See SPS_BAM_OPT_* bit flag. * @phys_addr - BAM base physical address (not peripheral address). * @virt_addr - BAM base virtual address. * @virt_size - For virtual mapping. * @irq - IRQ enum for use in ISR vector install. * @num_pipes - number of pipes. Can be read from hardware. * @summing_threshold - BAM event threshold. * * @periph_class - Peripheral device enumeration class. * @periph_dev_id - Peripheral global device ID. * @periph_phys_addr - Peripheral base physical address, for BAM-DMA only. * @periph_virt_addr - Peripheral base virtual address. * @periph_virt_size - Size for virtual mapping. * * @callback - callback function for BAM user. * @user - pointer to user data. * * @event_threshold - Pipe event threshold. * @desc_size - Size (bytes) of descriptor FIFO. * @data_size - Size (bytes) of data FIFO. * @desc_mem_id - Heap ID for default descriptor FIFO allocations. * @data_mem_id - Heap ID for default data FIFO allocations. * * @manage - BAM device management flags (see SPS_BAM_MGR_*). * @restricted_pipes - Bitmask of pipes restricted from local use. * @ee - Local execution environment index. * * @irq_gen_addr - MTI interrupt generation address. This configuration only * applies to BAM rev 1 and 2 hardware. MTIs are only supported on BAMs when * global config is controlled by a remote processor. * NOTE: This address must correspond to the MTI associated with the "irq" IRQ * enum specified above. * * @sec_config - must be set to SPS_BAM_SEC_DO_CONFIG to perform BAM security * configuration. Only the processor that manages the BAM is allowed to * perform the configuration. The global (top-level) BAM interrupt will be * assigned to the EE of the processor that manages the BAM. * * @p_sec_config_props - BAM device's security configuation * */ struct sps_bam_props { /* BAM device properties. */ u32 options; phys_addr_t phys_addr; void *virt_addr; u32 virt_size; u32 irq; u32 num_pipes; u32 summing_threshold; /* Peripheral device properties */ u32 periph_class; u32 periph_dev_id; phys_addr_t periph_phys_addr; void *periph_virt_addr; u32 periph_virt_size; /* Connection pipe parameter defaults. */ u32 event_threshold; u32 desc_size; u32 data_size; u32 desc_mem_id; u32 data_mem_id; /* Feedback to BAM user */ void (*callback)(enum sps_callback_case, void *); void *user; /* Security properties */ u32 manage; u32 restricted_pipes; u32 ee; /* BAM MTI interrupt generation */ u32 irq_gen_addr; /* Security configuration properties */ u32 sec_config; struct sps_bam_sec_config_props *p_sec_config_props; /* Logging control */ bool constrained_logging; u32 logging_number; }; /** * This struct specifies memory buffer properties. * * @base - Buffer virtual address. * @phys_base - Buffer physical address. * @size - Specifies buffer size (or maximum size). * @min_size - If non-zero, specifies buffer minimum size. * */ struct sps_mem_buffer { void *base; phys_addr_t phys_base; u32 size; u32 min_size; }; /** * This struct defines a connection's end point and is used as the argument * for the sps_connect(), sps_get_config(), and sps_set_config() functions. * For system mode pipe, use SPS_DEV_HANDLE_MEM for the end point that * corresponds to system memory. * * The client can force SPS to reserve a specific pipe on a BAM. * If the pipe is in use, the sps_connect/set_config() will fail. * * @source - Source BAM. * @src_pipe_index - BAM pipe index, 0 to 30. * @destination - Destination BAM. * @dest_pipe_index - BAM pipe index, 0 to 30. * * @mode - specifies which end (source or destination) of the connection will * be controlled/referenced by the client. * * @config - This value is for future use and should be set to * SPS_CONFIG_DEFAULT or left as default from sps_get_config(). * * @options - OR'd connection end point options (see SPS_O defines). * * WARNING: The memory provided should be physically contiguous and non-cached. * The user can use one of the following: * 1. sps_alloc_mem() - allocated from pipe-memory. * 2. dma_alloc_coherent() - allocate coherent DMA memory. * 3. dma_map_single() - for using memory allocated by kmalloc(). * * @desc - Descriptor FIFO. * @data - Data FIFO (BAM-to-BAM mode only). * * @event_thresh - Pipe event threshold or derivative. * @lock_group - The lock group this pipe belongs to. * * @sps_reserved - Reserved word - client must not modify. * */ struct sps_connect { unsigned long source; u32 src_pipe_index; unsigned long destination; u32 dest_pipe_index; enum sps_mode mode; u32 config; enum sps_option options; struct sps_mem_buffer desc; struct sps_mem_buffer data; u32 event_thresh; u32 lock_group; /* SETPEND/MTI interrupt generation parameters */ u32 irq_gen_addr; u32 irq_gen_data; u32 sps_reserved; }; /** * This struct defines a satellite connection's end point. The client of the * SPS driver on the satellite processor must call sps_get_config() to * initialize a struct sps_connect, then copy the values from the struct * sps_satellite to the struct sps_connect before making the sps_connect() * call to the satellite SPS driver. * */ struct sps_satellite { /** * These values must be copied to either the source or destination * corresponding values in the connect struct. */ phys_addr_t dev; u32 pipe_index; /** * These values must be copied to the corresponding values in the * connect struct */ u32 config; enum sps_option options; }; /** * This struct defines parameters for allocation of a BAM DMA channel. The * client must memset() this struct to zero before writing allocation * information. A value of zero for uninitialized values will instruct * the SPS driver to use defaults or "don't care". * * @dev - Associated BAM device handle, or SPS_DEV_HANDLE_DMA. * * @src_owner - Source owner processor ID. * @dest_owner - Destination owner processor ID. * */ struct sps_alloc_dma_chan { unsigned long dev; /* BAM DMA channel configuration parameters */ u32 threshold; enum sps_dma_priority priority; /** * Owner IDs are global host processor identifiers used by the system * SROT when establishing execution environments. */ u32 src_owner; u32 dest_owner; }; /** * This struct defines parameters for an allocated BAM DMA channel. * * @dev - BAM DMA device handle. * @dest_pipe_index - Destination/input/write pipe index. * @src_pipe_index - Source/output/read pipe index. * */ struct sps_dma_chan { unsigned long dev; u32 dest_pipe_index; u32 src_pipe_index; }; /** * This struct is an argument passed payload when triggering a callback event * object registered for an SPS connection end point. * * @user - Pointer registered with sps_register_event(). * * @event_id - Which event. * * @iovec - The associated I/O vector. If the end point is a system-mode * producer, the size will reflect the actual number of bytes written to the * buffer by the pipe. NOTE: If this I/O vector was part of a set submitted to * sps_transfer(), then the vector array itself will be updated with all of * the actual counts. * * @user - Pointer registered with the transfer. * */ struct sps_event_notify { void *user; enum sps_event event_id; /* Data associated with the event */ union { /* Data for SPS_EVENT_IRQ */ struct { u32 mask; } irq; /* Data for SPS_EVENT_EOT or SPS_EVENT_DESC_DONE */ struct { struct sps_iovec iovec; void *user; } transfer; /* Data for SPS_EVENT_ERROR */ struct { u32 status; } err; } data; }; /** * This struct defines a event registration parameters and is used as the * argument for the sps_register_event() function. * * @options - Event options that will trigger the event object. * @mode - Event trigger mode. * * @xfer_done - a pointer to a completion object. NULL if not in use. * * @callback - a callback to call on completion. NULL if not in use. * * @user - User pointer that will be provided in event callback data. * */ struct sps_register_event { enum sps_option options; enum sps_trigger mode; struct completion *xfer_done; void (*callback)(struct sps_event_notify *notify); void *user; }; /** * This struct defines a system memory transfer's parameters and is used as the * argument for the sps_transfer() function. * * @iovec_phys - Physical address of I/O vectors buffer. * @iovec - Pointer to I/O vectors buffer. * @iovec_count - Number of I/O vectors. * @user - User pointer passed in callback event. * */ struct sps_transfer { phys_addr_t iovec_phys; struct sps_iovec *iovec; u32 iovec_count; void *user; }; /** * This struct defines a timer control operation parameters and is used as an * argument for the sps_timer_ctrl() function. * * @op - Timer control operation. * @timeout_msec - Inactivity timeout (msec). * */ struct sps_timer_ctrl { enum sps_timer_op op; /** * The following configuration parameters must be set when the timer * control operation is SPS_TIMER_OP_CONFIG. */ enum sps_timer_mode mode; u32 timeout_msec; }; /** * This struct defines a timer control operation result and is used as an * argument for the sps_timer_ctrl() function. */ struct sps_timer_result { u32 current_timer; }; /*---------------------------------------------------------------------------- * Functions specific to sps interface * -------------------------------------------------------------------------*/ struct sps_pipe; /* Forward declaration */ #ifdef CONFIG_SPS /** * Register a BAM device * * This function registers a BAM device with the SPS driver. For each *peripheral that includes a BAM, the peripheral driver must register * the BAM with the SPS driver. * * A requirement is that the peripheral driver must remain attached * to the SPS driver until the BAM is deregistered. Otherwise, the * system may attempt to unload the SPS driver. BAM registrations would * be lost. * * @bam_props - Pointer to struct for BAM device properties. * * @dev_handle - Device handle will be written to this location (output). * * @return 0 on success, negative value on error * */ int sps_register_bam_device(const struct sps_bam_props *bam_props, unsigned long *dev_handle); /** * Deregister a BAM device * * This function deregisters a BAM device from the SPS driver. The peripheral * driver should deregister a BAM when the peripheral driver is shut down or * when BAM use should be disabled. * * A BAM cannot be deregistered if any of its pipes is in an active connection. * * When all BAMs have been deregistered, the system is free to unload the * SPS driver. * * @dev_handle - BAM device handle. * * @return 0 on success, negative value on error * */ int sps_deregister_bam_device(unsigned long dev_handle); /** * Allocate client state context * * This function allocate and initializes a client state context struct. * * @return pointer to client state context * */ struct sps_pipe *sps_alloc_endpoint(void); /** * Free client state context * * This function de-initializes and free a client state context struct. * * @ctx - client context for SPS connection end point * * @return 0 on success, negative value on error * */ int sps_free_endpoint(struct sps_pipe *h); /** * Get the configuration parameters for an SPS connection end point * * This function retrieves the configuration parameters for an SPS connection * end point. * This function may be called before the end point is connected (before * sps_connect is called). This allows the client to specify parameters before * the connection is established. * * The client must call this function to fill it's struct sps_connect * struct before modifying values and passing the struct to sps_set_config(). * * @h - client context for SPS connection end point * * @config - Pointer to buffer for the end point's configuration parameters. * Must not be NULL. * * @return 0 on success, negative value on error * */ int sps_get_config(struct sps_pipe *h, struct sps_connect *config); /** * Allocate memory from the SPS Pipe-Memory. * * @h - client context for SPS connection end point * * @mem - memory type - N/A. * * @mem_buffer - Pointer to struct for allocated memory properties. * * @return 0 on success, negative value on error * */ int sps_alloc_mem(struct sps_pipe *h, enum sps_mem mem, struct sps_mem_buffer *mem_buffer); /** * Free memory from the SPS Pipe-Memory. * * @h - client context for SPS connection end point * * @mem_buffer - Pointer to struct for allocated memory properties. * * @return 0 on success, negative value on error * */ int sps_free_mem(struct sps_pipe *h, struct sps_mem_buffer *mem_buffer); /** * Connect an SPS connection end point * * This function creates a connection between two SPS peripherals or between * an SPS peripheral and the local host processor (via system memory, end *point SPS_DEV_HANDLE_MEM). Establishing the connection includes * initialization of the SPS hardware and allocation of any other connection * resources (buffer memory, etc.). * * This function requires the client to specify both the source and * destination end points of the SPS connection. However, the handle * returned applies only to the end point of the connection that the client * controls. The end point under control must be specified by the * enum sps_mode mode argument, either SPS_MODE_SRC, SPS_MODE_DEST, or * SPS_MODE_CTL. Note that SPS_MODE_CTL is only supported for I/O * accelerator connections, and only a limited set of control operations are * allowed (TBD). * * For a connection involving system memory * (SPS_DEV_HANDLE_MEM), the peripheral end point must be * specified. For example, SPS_MODE_SRC must be specified for a * BAM-to-system connection, since the BAM pipe is the data * producer. * * For a specific peripheral-to-peripheral connection, there may be more than * one required configuration. For example, there might be high-performance * and low-power configurations for a connection between the two peripherals. * The config argument allows the client to specify different configurations, * which may require different system resource allocations and hardware * initialization. * * A client is allowed to create one and only one connection for its * struct sps_pipe. The handle is used to identify the connection end point * in subsequent SPS driver calls. A specific connection source or * destination end point can be associated with one and only one * struct sps_pipe. * * The client must establish an open device handle to the SPS. To do so, the * client must attach to the SPS driver and open the SPS device by calling * the following functions. * * @h - client context for SPS connection end point * * @connect - Pointer to connection parameters * * @return 0 on success, negative value on error * */ int sps_connect(struct sps_pipe *h, struct sps_connect *connect); /** * Disconnect an SPS connection end point * * This function disconnects an SPS connection end point. * The SPS hardware associated with that end point will be disabled. * For a connection involving system memory (SPS_DEV_HANDLE_MEM), all * connection resources are deallocated. For a peripheral-to-peripheral * connection, the resources associated with the connection will not be * deallocated until both end points are closed. * * The client must call sps_connect() for the handle before calling * this function. * * @h - client context for SPS connection end point * * @return 0 on success, negative value on error * */ int sps_disconnect(struct sps_pipe *h); /** * Register an event object for an SPS connection end point * * This function registers a callback event object for an SPS connection end *point. The registered event object will be triggered for the set of * events specified in reg->options that are enabled for the end point. * * There can only be one registered event object for each event. If an event * object is already registered for an event, it will be replaced. If *reg->event handle is NULL, then any registered event object for the * event will be deregistered. Option bits in reg->options not associated * with events are ignored. * * The client must call sps_connect() for the handle before calling * this function. * * @h - client context for SPS connection end point * * @reg - Pointer to event registration parameters * * @return 0 on success, negative value on error * */ int sps_register_event(struct sps_pipe *h, struct sps_register_event *reg); /** * Perform a single DMA transfer on an SPS connection end point * * This function submits a DMA transfer request consisting of a single buffer * for an SPS connection end point associated with a peripheral-to/from-memory * connection. The request will be submitted immediately to hardware if the * hardware is idle (data flow off, no other pending transfers). Otherwise, it * will be queued for later handling in the SPS driver work loop. * * The data buffer must be DMA ready. The client is responsible for insuring *physically contiguous memory, cache maintenance, and memory barrier. For * more information, see Appendix A. * * The client must not modify the data buffer until the completion indication is * received. * * This function cannot be used if transfer queuing is disabled (see option * SPS_O_NO_Q). The client must set the SPS_O_EOT option to receive a callback * event trigger when the transfer is complete. The SPS driver will insure the * appropriate flags in the I/O vectors are set to generate the completion * indication. * * The return value from this function may indicate that an error occurred. * Possible causes include invalid arguments. * * @h - client context for SPS connection end point * * @addr - Physical address of buffer to transfer. * * WARNING: The memory provided should be physically contiguous and * non-cached. * * The user can use one of the following: * 1. sps_alloc_mem() - allocated from pipe-memory. * 2. dma_alloc_coherent() - allocate DMA memory. * 3. dma_map_single() for memory allocated by kmalloc(). * * @size - Size in bytes of buffer to transfer * * @user - User pointer that will be returned to user as part of * event payload * * @return 0 on success, negative value on error * */ int sps_transfer_one(struct sps_pipe *h, phys_addr_t addr, u32 size, void *user, u32 flags); /** * Read event queue for an SPS connection end point * * This function reads event queue for an SPS connection end point. * * @h - client context for SPS connection end point * * @event - pointer to client's event data buffer * * @return 0 on success, negative value on error * */ int sps_get_event(struct sps_pipe *h, struct sps_event_notify *event); /** * Get processed I/O vector (completed transfers) * * This function fetches the next processed I/O vector. * * @h - client context for SPS connection end point * * @iovec - Pointer to I/O vector struct (output). * This struct will be zeroed if there are no more processed I/O vectors. * * @return 0 on success, negative value on error * */ int sps_get_iovec(struct sps_pipe *h, struct sps_iovec *iovec); /** * Enable an SPS connection end point * * This function enables an SPS connection end point. * * @h - client context for SPS connection end point * * @return 0 on success, negative value on error * */ int sps_flow_on(struct sps_pipe *h); /** * Disable an SPS connection end point * * This function disables an SPS connection end point. * * @h - client context for SPS connection end point * * @mode - Desired mode for disabling pipe data flow * * @return 0 on success, negative value on error * */ int sps_flow_off(struct sps_pipe *h, enum sps_flow_off mode); /** * Perform a Multiple DMA transfer on an SPS connection end point * * This function submits a DMA transfer request for an SPS connection end point * associated with a peripheral-to/from-memory connection. The request will be * submitted immediately to hardware if the hardware is idle (data flow off, no * other pending transfers). Otherwise, it will be queued for later handling in * the SPS driver work loop. * * The data buffers referenced by the I/O vectors must be DMA ready. * The client is responsible for insuring physically contiguous memory, * any cache maintenance, and memory barrier. For more information, * see Appendix A. * * The I/O vectors must specify physical addresses for the referenced buffers. * * The client must not modify the data buffers referenced by I/O vectors until * the completion indication is received. * * If transfer queuing is disabled (see option SPS_O_NO_Q), the client is * responsible for setting the appropriate flags in the I/O vectors to generate * the completion indication. Also, the client is responsible for enabling the * appropriate connection callback event options for completion indication (see * sps_connect(), sps_set_config()). * * If transfer queuing is enabled, the client must set the SPS_O_EOT option to * receive a callback event trigger when the transfer is complete. The SPS * driver will insure the appropriate flags in the I/O vectors are set to * generate the completion indication. The client must not set any flags in the * I/O vectors, as this may cause the SPS driver to become out of sync with the * hardware. * * The return value from this function may indicate that an error occurred. * Possible causes include invalid arguments. If transfer queuing is disabled, * an error will occur if the pipe is already processing a transfer. * * @h - client context for SPS connection end point * * @transfer - Pointer to transfer parameter struct * * @return 0 on success, negative value on error * */ int sps_transfer(struct sps_pipe *h, struct sps_transfer *transfer); /** * Determine whether an SPS connection end point FIFO is empty * * This function returns the empty state of an SPS connection end point. * * @h - client context for SPS connection end point * * @empty - pointer to client's empty status word (boolean) * * @return 0 on success, negative value on error * */ int sps_is_pipe_empty(struct sps_pipe *h, u32 *empty); /** * Reset an SPS BAM device * * This function resets an SPS BAM device. * * @dev - device handle for the BAM * * @return 0 on success, negative value on error * */ int sps_device_reset(unsigned long dev); /** * Set the configuration parameters for an SPS connection end point * * This function sets the configuration parameters for an SPS connection * end point. This function may be called before the end point is connected * (before sps_connect is called). This allows the client to specify *parameters before the connection is established. The client is allowed * to pre-allocate resources and override driver defaults. * * The client must call sps_get_config() to fill it's struct sps_connect * struct before modifying values and passing the struct to this function. * Only those parameters that differ from the current configuration will * be processed. * * @h - client context for SPS connection end point * * @config - Pointer to the end point's new configuration parameters. * * @return 0 on success, negative value on error * */ int sps_set_config(struct sps_pipe *h, struct sps_connect *config); /** * Set ownership of an SPS connection end point * * This function sets the ownership of an SPS connection end point to * either local (default) or non-local. This function is used to * retrieve the struct sps_connect data that must be used by a * satellite processor when calling sps_connect(). * * Non-local ownership is only possible/meaningful on the processor * that controls resource allocations (apps processor). Setting ownership * to non-local on a satellite processor will fail. * * Setting ownership from non-local to local will succeed only if the * owning satellite processor has properly brought the end point to * an idle condition. * * This function will succeed if the connection end point is already in * the specified ownership state. * * @h - client context for SPS connection end point * * @owner - New ownership of the connection end point * * @connect - Pointer to buffer for satellite processor connect data. * Can be NULL to avoid retrieving the connect data. Will be ignored * if the end point ownership is set to local. * * @return 0 on success, negative value on error * */ int sps_set_owner(struct sps_pipe *h, enum sps_owner owner, struct sps_satellite *connect); #ifdef CONFIG_SPS_SUPPORT_BAMDMA /** * Allocate a BAM DMA channel * * This function allocates a BAM DMA channel. A "BAM DMA" is a special * DMA peripheral with a BAM front end. The DMA peripheral acts as a conduit * for data to flow into a consumer pipe and then out of a producer pipe. * It's primarily purpose is to serve as a path for interprocessor communication * that allows each processor to control and protect it's own memory space. * * @alloc - Pointer to struct for BAM DMA channel allocation properties. * * @chan - Allocated channel information will be written to this * location (output). * * @return 0 on success, negative value on error * */ int sps_alloc_dma_chan(const struct sps_alloc_dma_chan *alloc, struct sps_dma_chan *chan); /** * Free a BAM DMA channel * * This function frees a BAM DMA channel. * * @chan - Pointer to information for channel to free * * @return 0 on success, negative value on error * */ int sps_free_dma_chan(struct sps_dma_chan *chan); /** * Get the BAM handle for BAM-DMA. * * The BAM handle should be use as source/destination in the sps_connect(). * * @return handle on success, zero on error * */ unsigned long sps_dma_get_bam_handle(void); /** * Free the BAM handle for BAM-DMA. * */ void sps_dma_free_bam_handle(unsigned long h); #else static inline int sps_alloc_dma_chan(const struct sps_alloc_dma_chan *alloc, struct sps_dma_chan *chan) { return -EPERM; } static inline int sps_free_dma_chan(struct sps_dma_chan *chan) { return -EPERM; } static inline unsigned long sps_dma_get_bam_handle(void) { return 0; } static inline void sps_dma_free_bam_handle(unsigned long h) { } #endif /** * Get number of free transfer entries for an SPS connection end point * * This function returns the number of free transfer entries for an * SPS connection end point. * * @h - client context for SPS connection end point * * @count - pointer to count status * * @return 0 on success, negative value on error * */ int sps_get_free_count(struct sps_pipe *h, u32 *count); /** * Perform timer control * * This function performs timer control operations. * * @h - client context for SPS connection end point * * @timer_ctrl - Pointer to timer control specification * * @timer_result - Pointer to buffer for timer operation result. * This argument can be NULL if no result is expected for the operation. * If non-NULL, the current timer value will always provided. * * @return 0 on success, negative value on error * */ int sps_timer_ctrl(struct sps_pipe *h, struct sps_timer_ctrl *timer_ctrl, struct sps_timer_result *timer_result); /** * Find the handle of a BAM device based on the physical address * * This function finds a BAM device in the BAM registration list that * matches the specified physical address, and returns its handle. * * @phys_addr - physical address of the BAM * * @h - device handle of the BAM * * @return 0 on success, negative value on error * */ int sps_phy2h(phys_addr_t phys_addr, unsigned long *handle); /** * Setup desc/data FIFO for bam-to-bam connection * * @mem_buffer - Pointer to struct for allocated memory properties. * * @addr - address of FIFO * * @size - FIFO size * * @use_offset - use address offset instead of absolute address * * @return 0 on success, negative value on error * */ int sps_setup_bam2bam_fifo(struct sps_mem_buffer *mem_buffer, u32 addr, u32 size, int use_offset); /** * Get the number of unused descriptors in the descriptor FIFO * of a pipe * * @h - client context for SPS connection end point * * @desc_num - number of unused descriptors * * @return 0 on success, negative value on error * */ int sps_get_unused_desc_num(struct sps_pipe *h, u32 *desc_num); /** * Get the debug info of BAM registers and descriptor FIFOs * * @dev - BAM device handle * * @option - debugging option * * @para - parameter used for an option (such as pipe combination) * * @tb_sel - testbus selection * * @desc_sel - selection of descriptors * * @return 0 on success, negative value on error * */ int sps_get_bam_debug_info(unsigned long dev, u32 option, u32 para, u32 tb_sel, u32 desc_sel); /** * Vote for or relinquish BAM DMA clock * * @clk_on - to turn on or turn off the clock * * @return 0 on success, negative value on error * */ int sps_ctrl_bam_dma_clk(bool clk_on); /* * sps_pipe_reset - reset a pipe of a BAM. * @dev: BAM device handle * @pipe: pipe index * * This function resets a pipe of a BAM. * * Return: 0 on success, negative value on error */ int sps_pipe_reset(unsigned long dev, u32 pipe); /* * sps_pipe_disable - disable a pipe of a BAM. * @dev: BAM device handle * @pipe: pipe index * * This function disables a pipe of a BAM. * * Return: 0 on success, negative value on error */ int sps_pipe_disable(unsigned long dev, u32 pipe); /* * sps_pipe_pending_desc - checking pending descriptor. * @dev: BAM device handle * @pipe: pipe index * @pending: indicate if there is any pending descriptor. * * This function checks if a pipe of a BAM has any pending descriptor. * * Return: 0 on success, negative value on error */ int sps_pipe_pending_desc(unsigned long dev, u32 pipe, bool *pending); /* * sps_bam_process_irq - process IRQ of a BAM. * @dev: BAM device handle * * This function processes any pending IRQ of a BAM. * * Return: 0 on success, negative value on error */ int sps_bam_process_irq(unsigned long dev); #else static inline int sps_register_bam_device(const struct sps_bam_props *bam_props, unsigned long *dev_handle) { return -EPERM; } static inline int sps_deregister_bam_device(unsigned long dev_handle) { return -EPERM; } static inline struct sps_pipe *sps_alloc_endpoint(void) { return NULL; } static inline int sps_free_endpoint(struct sps_pipe *h) { return -EPERM; } static inline int sps_get_config(struct sps_pipe *h, struct sps_connect *config) { return -EPERM; } static inline int sps_alloc_mem(struct sps_pipe *h, enum sps_mem mem, struct sps_mem_buffer *mem_buffer) { return -EPERM; } static inline int sps_free_mem(struct sps_pipe *h, struct sps_mem_buffer *mem_buffer) { return -EPERM; } static inline int sps_connect(struct sps_pipe *h, struct sps_connect *connect) { return -EPERM; } static inline int sps_disconnect(struct sps_pipe *h) { return -EPERM; } static inline int sps_register_event(struct sps_pipe *h, struct sps_register_event *reg) { return -EPERM; } static inline int sps_transfer_one(struct sps_pipe *h, phys_addr_t addr, u32 size, void *user, u32 flags) { return -EPERM; } static inline int sps_get_event(struct sps_pipe *h, struct sps_event_notify *event) { return -EPERM; } static inline int sps_get_iovec(struct sps_pipe *h, struct sps_iovec *iovec) { return -EPERM; } static inline int sps_flow_on(struct sps_pipe *h) { return -EPERM; } static inline int sps_flow_off(struct sps_pipe *h, enum sps_flow_off mode) { return -EPERM; } static inline int sps_transfer(struct sps_pipe *h, struct sps_transfer *transfer) { return -EPERM; } static inline int sps_is_pipe_empty(struct sps_pipe *h, u32 *empty) { return -EPERM; } static inline int sps_device_reset(unsigned long dev) { return -EPERM; } static inline int sps_set_config(struct sps_pipe *h, struct sps_connect *config) { return -EPERM; } static inline int sps_set_owner(struct sps_pipe *h, enum sps_owner owner, struct sps_satellite *connect) { return -EPERM; } static inline int sps_get_free_count(struct sps_pipe *h, u32 *count) { return -EPERM; } static inline int sps_alloc_dma_chan(const struct sps_alloc_dma_chan *alloc, struct sps_dma_chan *chan) { return -EPERM; } static inline int sps_free_dma_chan(struct sps_dma_chan *chan) { return -EPERM; } static inline unsigned long sps_dma_get_bam_handle(void) { return 0; } static inline void sps_dma_free_bam_handle(unsigned long h) { } static inline int sps_timer_ctrl(struct sps_pipe *h, struct sps_timer_ctrl *timer_ctrl, struct sps_timer_result *timer_result) { return -EPERM; } static inline int sps_phy2h(phys_addr_t phys_addr, unsigned long *handle) { return -EPERM; } static inline int sps_setup_bam2bam_fifo(struct sps_mem_buffer *mem_buffer, u32 addr, u32 size, int use_offset) { return -EPERM; } static inline int sps_get_unused_desc_num(struct sps_pipe *h, u32 *desc_num) { return -EPERM; } static inline int sps_get_bam_debug_info(unsigned long dev, u32 option, u32 para, u32 tb_sel, u32 desc_sel) { return -EPERM; } static inline int sps_ctrl_bam_dma_clk(bool clk_on) { return -EPERM; } static inline int sps_pipe_reset(unsigned long dev, u32 pipe) { return -EPERM; } static inline int sps_pipe_disable(unsigned long dev, u32 pipe) { return -EPERM; } static inline int sps_pipe_pending_desc(unsigned long dev, u32 pipe, bool *pending) { return -EPERM; } static inline int sps_bam_process_irq(unsigned long dev) { return -EPERM; } #endif #endif /* _SPS_H_ */