android_kernel_samsung_msm8976/drivers/pci/pcie/aer/aerdrv_acpi.c
Zhang, Yanmin 6c2b374d74 PCI-Express AER implemetation: AER core and aerdriver
Patch 3 implements the core part of PCI-Express AER and aerdrv
port service driver.

When a root port service device is probed, the aerdrv will call
request_irq to register irq handler for AER error interrupt.

When a device sends an PCI-Express error message to the root port,
the root port will trigger an interrupt, by either MSI or IO-APIC,
then kernel would run the irq handler. The handler collects root
error status register and schedules a work. The work will call
the core part to process the error based on its type
(Correctable/non-fatal/fatal).

As for Correctable errors, the patch chooses to just clear the correctable
error status register of the device.

As for the non-fatal error, the patch follows generic PCI error handler
rules to call the error callback functions of the endpoint's driver. If
the device is a bridge, the patch chooses to broadcast the error to
downstream devices.

As for the fatal error, the patch resets the pci-express link and
follows generic PCI error handler rules to call the error callback
functions of the endpoint's driver. If the device is a bridge, the patch
chooses to broadcast the error to downstream devices.

Signed-off-by: Zhang Yanmin <yanmin.zhang@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-26 17:43:53 -07:00

68 lines
1.5 KiB
C

/*
* Access ACPI _OSC method
*
* Copyright (C) 2006 Intel Corp.
* Tom Long Nguyen (tom.l.nguyen@intel.com)
* Zhang Yanmin (yanmin.zhang@intel.com)
*
*/
#include <linux/module.h>
#include <linux/pci.h>
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/pm.h>
#include <linux/suspend.h>
#include <linux/acpi.h>
#include <linux/pci-acpi.h>
#include <linux/delay.h>
#include "aerdrv.h"
/**
* aer_osc_setup - run ACPI _OSC method
*
* Return:
* Zero if success. Nonzero for otherwise.
*
* Invoked when PCIE bus loads AER service driver. To avoid conflict with
* BIOS AER support requires BIOS to yield AER control to OS native driver.
**/
int aer_osc_setup(struct pci_dev *dev)
{
int retval = OSC_METHOD_RUN_SUCCESS;
acpi_status status;
acpi_handle handle = DEVICE_ACPI_HANDLE(&dev->dev);
struct pci_dev *pdev = dev;
struct pci_bus *parent;
while (!handle) {
if (!pdev || !pdev->bus->parent)
break;
parent = pdev->bus->parent;
if (!parent->self)
/* Parent must be a host bridge */
handle = acpi_get_pci_rootbridge_handle(
pci_domain_nr(parent),
parent->number);
else
handle = DEVICE_ACPI_HANDLE(
&(parent->self->dev));
pdev = parent->self;
}
if (!handle)
return OSC_METHOD_NOT_SUPPORTED;
pci_osc_support_set(OSC_EXT_PCI_CONFIG_SUPPORT);
status = pci_osc_control_set(handle, OSC_PCI_EXPRESS_AER_CONTROL |
OSC_PCI_EXPRESS_CAP_STRUCTURE_CONTROL);
if (ACPI_FAILURE(status)) {
if (status == AE_SUPPORT)
retval = OSC_METHOD_NOT_SUPPORTED;
else
retval = OSC_METHOD_RUN_FAILURE;
}
return retval;
}