android_kernel_samsung_msm8976/drivers/media/video/cx88/cx88-input.c
Trent Piepho 6a59d64c5c V4L/DVB (6021): cx88: Copy board information into card state
The cx88 driver state stored the ID of the board type in core->board.  Every
time the driver need to get some information about the board configuration, it
uses the board number as an index into board configuration array.

This patch changes it so that the board number is in core->boardnr, and
core->board is a copy of the board configuration information.  This allows
access to board information without the extra indirection.  e.g.
cx88_boards[core->board].mpeg becomes core->board.mpeg.

This has a number of advantages:
- The code is simpler to write.

- It compiles to be smaller and faster, without needing the extra array lookup
  to get at the board information.

- The cx88_boards array no longer needs to be exported to all cx88 modules.

- The boards array can be made const

- It should be possible to avoid keeping the (large) cx88_boards array around
  after the module is loaded.

- If module parameters or eeprom info override some board configuration
  setting, it's not necessary to modify the boards array, which would
  affect all boards of the same type.

Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-09 22:05:16 -03:00

469 lines
12 KiB
C

/*
*
* Device driver for GPIO attached remote control interfaces
* on Conexant 2388x based TV/DVB cards.
*
* Copyright (c) 2003 Pavel Machek
* Copyright (c) 2004 Gerd Knorr
* Copyright (c) 2004, 2005 Chris Pascoe
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/input.h>
#include <linux/pci.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
#include "cx88.h"
#include <media/ir-common.h>
/* ---------------------------------------------------------------------- */
struct cx88_IR {
struct cx88_core *core;
struct input_dev *input;
struct ir_input_state ir;
char name[32];
char phys[32];
/* sample from gpio pin 16 */
u32 sampling;
u32 samples[16];
int scount;
unsigned long release;
/* poll external decoder */
int polling;
struct work_struct work;
struct timer_list timer;
u32 gpio_addr;
u32 last_gpio;
u32 mask_keycode;
u32 mask_keydown;
u32 mask_keyup;
};
static int ir_debug = 0;
module_param(ir_debug, int, 0644); /* debug level [IR] */
MODULE_PARM_DESC(ir_debug, "enable debug messages [IR]");
#define ir_dprintk(fmt, arg...) if (ir_debug) \
printk(KERN_DEBUG "%s IR: " fmt , ir->core->name , ##arg)
/* ---------------------------------------------------------------------- */
static void cx88_ir_handle_key(struct cx88_IR *ir)
{
struct cx88_core *core = ir->core;
u32 gpio, data, auxgpio;
/* read gpio value */
gpio = cx_read(ir->gpio_addr);
switch (core->boardnr) {
case CX88_BOARD_NPGTECH_REALTV_TOP10FM:
/* This board apparently uses a combination of 2 GPIO
to represent the keys. Additionally, the second GPIO
can be used for parity.
Example:
for key "5"
gpio = 0x758, auxgpio = 0xe5 or 0xf5
for key "Power"
gpio = 0x758, auxgpio = 0xed or 0xfd
*/
auxgpio = cx_read(MO_GP1_IO);
/* Take out the parity part */
gpio=(gpio & 0x7fd) + (auxgpio & 0xef);
break;
case CX88_BOARD_WINFAST_DTV1000:
gpio = (gpio & 0x6ff) | ((cx_read(MO_GP1_IO) << 8) & 0x900);
auxgpio = gpio;
break;
default:
auxgpio = gpio;
}
if (ir->polling) {
if (ir->last_gpio == auxgpio)
return;
ir->last_gpio = auxgpio;
}
/* extract data */
data = ir_extract_bits(gpio, ir->mask_keycode);
ir_dprintk("irq gpio=0x%x code=%d | %s%s%s\n",
gpio, data,
ir->polling ? "poll" : "irq",
(gpio & ir->mask_keydown) ? " down" : "",
(gpio & ir->mask_keyup) ? " up" : "");
if (ir->core->boardnr == CX88_BOARD_NORWOOD_MICRO) {
u32 gpio_key = cx_read(MO_GP0_IO);
data = (data << 4) | ((gpio_key & 0xf0) >> 4);
ir_input_keydown(ir->input, &ir->ir, data, data);
ir_input_nokey(ir->input, &ir->ir);
} else if (ir->mask_keydown) {
/* bit set on keydown */
if (gpio & ir->mask_keydown) {
ir_input_keydown(ir->input, &ir->ir, data, data);
} else {
ir_input_nokey(ir->input, &ir->ir);
}
} else if (ir->mask_keyup) {
/* bit cleared on keydown */
if (0 == (gpio & ir->mask_keyup)) {
ir_input_keydown(ir->input, &ir->ir, data, data);
} else {
ir_input_nokey(ir->input, &ir->ir);
}
} else {
/* can't distinguish keydown/up :-/ */
ir_input_keydown(ir->input, &ir->ir, data, data);
ir_input_nokey(ir->input, &ir->ir);
}
}
static void ir_timer(unsigned long data)
{
struct cx88_IR *ir = (struct cx88_IR *)data;
schedule_work(&ir->work);
}
static void cx88_ir_work(struct work_struct *work)
{
struct cx88_IR *ir = container_of(work, struct cx88_IR, work);
cx88_ir_handle_key(ir);
mod_timer(&ir->timer, jiffies + msecs_to_jiffies(ir->polling));
}
static void cx88_ir_start(struct cx88_core *core, struct cx88_IR *ir)
{
if (ir->polling) {
setup_timer(&ir->timer, ir_timer, (unsigned long)ir);
INIT_WORK(&ir->work, cx88_ir_work);
schedule_work(&ir->work);
}
if (ir->sampling) {
core->pci_irqmask |= (1 << 18); /* IR_SMP_INT */
cx_write(MO_DDS_IO, 0xa80a80); /* 4 kHz sample rate */
cx_write(MO_DDSCFG_IO, 0x5); /* enable */
}
}
static void cx88_ir_stop(struct cx88_core *core, struct cx88_IR *ir)
{
if (ir->sampling) {
cx_write(MO_DDSCFG_IO, 0x0);
core->pci_irqmask &= ~(1 << 18);
}
if (ir->polling) {
del_timer_sync(&ir->timer);
flush_scheduled_work();
}
}
/* ---------------------------------------------------------------------- */
int cx88_ir_init(struct cx88_core *core, struct pci_dev *pci)
{
struct cx88_IR *ir;
struct input_dev *input_dev;
IR_KEYTAB_TYPE *ir_codes = NULL;
int ir_type = IR_TYPE_OTHER;
int err = -ENOMEM;
ir = kzalloc(sizeof(*ir), GFP_KERNEL);
input_dev = input_allocate_device();
if (!ir || !input_dev)
goto err_out_free;
ir->input = input_dev;
/* detect & configure */
switch (core->boardnr) {
case CX88_BOARD_DNTV_LIVE_DVB_T:
case CX88_BOARD_KWORLD_DVB_T:
case CX88_BOARD_KWORLD_DVB_T_CX22702:
ir_codes = ir_codes_dntv_live_dvb_t;
ir->gpio_addr = MO_GP1_IO;
ir->mask_keycode = 0x1f;
ir->mask_keyup = 0x60;
ir->polling = 50; /* ms */
break;
case CX88_BOARD_TERRATEC_CINERGY_1400_DVB_T1:
ir_codes = ir_codes_cinergy_1400;
ir_type = IR_TYPE_PD;
ir->sampling = 0xeb04; /* address */
break;
case CX88_BOARD_HAUPPAUGE:
case CX88_BOARD_HAUPPAUGE_DVB_T1:
case CX88_BOARD_HAUPPAUGE_NOVASE2_S1:
case CX88_BOARD_HAUPPAUGE_NOVASPLUS_S1:
case CX88_BOARD_HAUPPAUGE_HVR1100:
case CX88_BOARD_HAUPPAUGE_HVR3000:
ir_codes = ir_codes_hauppauge_new;
ir_type = IR_TYPE_RC5;
ir->sampling = 1;
break;
case CX88_BOARD_WINFAST_DTV2000H:
ir_codes = ir_codes_winfast;
ir->gpio_addr = MO_GP0_IO;
ir->mask_keycode = 0x8f8;
ir->mask_keyup = 0x100;
ir->polling = 50; /* ms */
break;
case CX88_BOARD_WINFAST2000XP_EXPERT:
case CX88_BOARD_WINFAST_DTV1000:
ir_codes = ir_codes_winfast;
ir->gpio_addr = MO_GP0_IO;
ir->mask_keycode = 0x8f8;
ir->mask_keyup = 0x100;
ir->polling = 1; /* ms */
break;
case CX88_BOARD_IODATA_GVBCTV7E:
ir_codes = ir_codes_iodata_bctv7e;
ir->gpio_addr = MO_GP0_IO;
ir->mask_keycode = 0xfd;
ir->mask_keydown = 0x02;
ir->polling = 5; /* ms */
break;
case CX88_BOARD_PROLINK_PLAYTVPVR:
case CX88_BOARD_PIXELVIEW_PLAYTV_ULTRA_PRO:
ir_codes = ir_codes_pixelview;
ir->gpio_addr = MO_GP1_IO;
ir->mask_keycode = 0x1f;
ir->mask_keyup = 0x80;
ir->polling = 1; /* ms */
break;
case CX88_BOARD_KWORLD_LTV883:
ir_codes = ir_codes_pixelview;
ir->gpio_addr = MO_GP1_IO;
ir->mask_keycode = 0x1f;
ir->mask_keyup = 0x60;
ir->polling = 1; /* ms */
break;
case CX88_BOARD_ADSTECH_DVB_T_PCI:
ir_codes = ir_codes_adstech_dvb_t_pci;
ir->gpio_addr = MO_GP1_IO;
ir->mask_keycode = 0xbf;
ir->mask_keyup = 0x40;
ir->polling = 50; /* ms */
break;
case CX88_BOARD_MSI_TVANYWHERE_MASTER:
ir_codes = ir_codes_msi_tvanywhere;
ir->gpio_addr = MO_GP1_IO;
ir->mask_keycode = 0x1f;
ir->mask_keyup = 0x40;
ir->polling = 1; /* ms */
break;
case CX88_BOARD_AVERTV_303:
case CX88_BOARD_AVERTV_STUDIO_303:
ir_codes = ir_codes_avertv_303;
ir->gpio_addr = MO_GP2_IO;
ir->mask_keycode = 0xfb;
ir->mask_keydown = 0x02;
ir->polling = 50; /* ms */
break;
case CX88_BOARD_DNTV_LIVE_DVB_T_PRO:
ir_codes = ir_codes_dntv_live_dvbt_pro;
ir_type = IR_TYPE_PD;
ir->sampling = 0xff00; /* address */
break;
case CX88_BOARD_NORWOOD_MICRO:
ir_codes = ir_codes_norwood;
ir->gpio_addr = MO_GP1_IO;
ir->mask_keycode = 0x0e;
ir->mask_keyup = 0x80;
ir->polling = 50; /* ms */
break;
case CX88_BOARD_NPGTECH_REALTV_TOP10FM:
ir_codes = ir_codes_npgtech;
ir->gpio_addr = MO_GP0_IO;
ir->mask_keycode = 0xfa;
ir->polling = 50; /* ms */
break;
}
if (NULL == ir_codes) {
err = -ENODEV;
goto err_out_free;
}
/* init input device */
snprintf(ir->name, sizeof(ir->name), "cx88 IR (%s)", core->board.name);
snprintf(ir->phys, sizeof(ir->phys), "pci-%s/ir0", pci_name(pci));
ir_input_init(input_dev, &ir->ir, ir_type, ir_codes);
input_dev->name = ir->name;
input_dev->phys = ir->phys;
input_dev->id.bustype = BUS_PCI;
input_dev->id.version = 1;
if (pci->subsystem_vendor) {
input_dev->id.vendor = pci->subsystem_vendor;
input_dev->id.product = pci->subsystem_device;
} else {
input_dev->id.vendor = pci->vendor;
input_dev->id.product = pci->device;
}
input_dev->dev.parent = &pci->dev;
/* record handles to ourself */
ir->core = core;
core->ir = ir;
cx88_ir_start(core, ir);
/* all done */
err = input_register_device(ir->input);
if (err)
goto err_out_stop;
return 0;
err_out_stop:
cx88_ir_stop(core, ir);
core->ir = NULL;
err_out_free:
input_free_device(input_dev);
kfree(ir);
return err;
}
int cx88_ir_fini(struct cx88_core *core)
{
struct cx88_IR *ir = core->ir;
/* skip detach on non attached boards */
if (NULL == ir)
return 0;
cx88_ir_stop(core, ir);
input_unregister_device(ir->input);
kfree(ir);
/* done */
core->ir = NULL;
return 0;
}
/* ---------------------------------------------------------------------- */
void cx88_ir_irq(struct cx88_core *core)
{
struct cx88_IR *ir = core->ir;
u32 samples, ircode;
int i;
if (NULL == ir)
return;
if (!ir->sampling)
return;
samples = cx_read(MO_SAMPLE_IO);
if (0 != samples && 0xffffffff != samples) {
/* record sample data */
if (ir->scount < ARRAY_SIZE(ir->samples))
ir->samples[ir->scount++] = samples;
return;
}
if (!ir->scount) {
/* nothing to sample */
if (ir->ir.keypressed && time_after(jiffies, ir->release))
ir_input_nokey(ir->input, &ir->ir);
return;
}
/* have a complete sample */
if (ir->scount < ARRAY_SIZE(ir->samples))
ir->samples[ir->scount++] = samples;
for (i = 0; i < ir->scount; i++)
ir->samples[i] = ~ir->samples[i];
if (ir_debug)
ir_dump_samples(ir->samples, ir->scount);
/* decode it */
switch (core->boardnr) {
case CX88_BOARD_TERRATEC_CINERGY_1400_DVB_T1:
case CX88_BOARD_DNTV_LIVE_DVB_T_PRO:
ircode = ir_decode_pulsedistance(ir->samples, ir->scount, 1, 4);
if (ircode == 0xffffffff) { /* decoding error */
ir_dprintk("pulse distance decoding error\n");
break;
}
ir_dprintk("pulse distance decoded: %x\n", ircode);
if (ircode == 0) { /* key still pressed */
ir_dprintk("pulse distance decoded repeat code\n");
ir->release = jiffies + msecs_to_jiffies(120);
break;
}
if ((ircode & 0xffff) != (ir->sampling & 0xffff)) { /* wrong address */
ir_dprintk("pulse distance decoded wrong address\n");
break;
}
if (((~ircode >> 24) & 0xff) != ((ircode >> 16) & 0xff)) { /* wrong checksum */
ir_dprintk("pulse distance decoded wrong check sum\n");
break;
}
ir_dprintk("Key Code: %x\n", (ircode >> 16) & 0x7f);
ir_input_keydown(ir->input, &ir->ir, (ircode >> 16) & 0x7f, (ircode >> 16) & 0xff);
ir->release = jiffies + msecs_to_jiffies(120);
break;
case CX88_BOARD_HAUPPAUGE:
case CX88_BOARD_HAUPPAUGE_DVB_T1:
case CX88_BOARD_HAUPPAUGE_NOVASE2_S1:
case CX88_BOARD_HAUPPAUGE_NOVASPLUS_S1:
case CX88_BOARD_HAUPPAUGE_HVR1100:
case CX88_BOARD_HAUPPAUGE_HVR3000:
ircode = ir_decode_biphase(ir->samples, ir->scount, 5, 7);
ir_dprintk("biphase decoded: %x\n", ircode);
if ((ircode & 0xfffff000) != 0x3000)
break;
ir_input_keydown(ir->input, &ir->ir, ircode & 0x3f, ircode);
ir->release = jiffies + msecs_to_jiffies(120);
break;
}
ir->scount = 0;
return;
}
/* ---------------------------------------------------------------------- */
MODULE_AUTHOR("Gerd Knorr, Pavel Machek, Chris Pascoe");
MODULE_DESCRIPTION("input driver for cx88 GPIO-based IR remote controls");
MODULE_LICENSE("GPL");
/*
* Local variables:
* c-basic-offset: 8
* End:
*/