android_kernel_samsung_msm8976/arch/i386/kernel/vmitime.c
Zachary Amsden 7507ba34e8 [PATCH] vmi: timer fixes round two
Critical bugfixes for the VMI-Timer code.

1) Do not setup a one shot alarm if we are keeping the periodic alarm
   armed.  Additionally, since the periodic alarm can be run at a lower rate
   than HZ, let's fixup the guard to the no-idle-hz mode appropriately.  This
   fixes the bug where the no-idle-hz mode might have a higher interrupt rate
   than the non-idle case.

2) The interrupt handler can no longer adjust xtime due to nested lock
   acquisition.  Drop this.  We don't need to check for wallclock time at
   every tick, it can be done in userspace instead.

3) Add a bypass to disable noidle operation.  This is useful as a last
   minute workaround, or testing measure.

4) The code to skip the IO_APIC timer testing (no_timer_check) should be
   conditional on IO_APIC, not SMP, since UP kernels can have this configured
   in as well.

Signed-off-by: Dan Hecht <dhecht@vmware.com>
Signed-off-by: Zachary Amsden <zach@vmware.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-03-05 07:57:52 -08:00

491 lines
14 KiB
C

/*
* VMI paravirtual timer support routines.
*
* Copyright (C) 2005, VMware, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
* NON INFRINGEMENT. See the GNU General Public License for more
* details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
* Send feedback to dhecht@vmware.com
*
*/
/*
* Portions of this code from arch/i386/kernel/timers/timer_tsc.c.
* Portions of the CONFIG_NO_IDLE_HZ code from arch/s390/kernel/time.c.
* See comments there for proper credits.
*/
#include <linux/spinlock.h>
#include <linux/init.h>
#include <linux/errno.h>
#include <linux/jiffies.h>
#include <linux/interrupt.h>
#include <linux/kernel_stat.h>
#include <linux/rcupdate.h>
#include <linux/clocksource.h>
#include <asm/timer.h>
#include <asm/io.h>
#include <asm/apic.h>
#include <asm/div64.h>
#include <asm/timer.h>
#include <asm/desc.h>
#include <asm/vmi.h>
#include <asm/vmi_time.h>
#include <mach_timer.h>
#include <io_ports.h>
#ifdef CONFIG_X86_LOCAL_APIC
#define VMI_ALARM_WIRING VMI_ALARM_WIRED_LVTT
#else
#define VMI_ALARM_WIRING VMI_ALARM_WIRED_IRQ0
#endif
/* Cached VMI operations */
struct vmi_timer_ops vmi_timer_ops;
#ifdef CONFIG_NO_IDLE_HZ
/* /proc/sys/kernel/hz_timer state. */
int sysctl_hz_timer;
/* Some stats */
static DEFINE_PER_CPU(unsigned long, vmi_idle_no_hz_irqs);
static DEFINE_PER_CPU(unsigned long, vmi_idle_no_hz_jiffies);
static DEFINE_PER_CPU(unsigned long, idle_start_jiffies);
#endif /* CONFIG_NO_IDLE_HZ */
/* Number of alarms per second. By default this is CONFIG_VMI_ALARM_HZ. */
static int alarm_hz = CONFIG_VMI_ALARM_HZ;
/* Cache of the value get_cycle_frequency / HZ. */
static signed long long cycles_per_jiffy;
/* Cache of the value get_cycle_frequency / alarm_hz. */
static signed long long cycles_per_alarm;
/* The number of cycles accounted for by the 'jiffies'/'xtime' count.
* Protected by xtime_lock. */
static unsigned long long real_cycles_accounted_system;
/* The number of cycles accounted for by update_process_times(), per cpu. */
static DEFINE_PER_CPU(unsigned long long, process_times_cycles_accounted_cpu);
/* The number of stolen cycles accounted, per cpu. */
static DEFINE_PER_CPU(unsigned long long, stolen_cycles_accounted_cpu);
/* Clock source. */
static cycle_t read_real_cycles(void)
{
return vmi_timer_ops.get_cycle_counter(VMI_CYCLES_REAL);
}
static cycle_t read_available_cycles(void)
{
return vmi_timer_ops.get_cycle_counter(VMI_CYCLES_AVAILABLE);
}
#if 0
static cycle_t read_stolen_cycles(void)
{
return vmi_timer_ops.get_cycle_counter(VMI_CYCLES_STOLEN);
}
#endif /* 0 */
static struct clocksource clocksource_vmi = {
.name = "vmi-timer",
.rating = 450,
.read = read_real_cycles,
.mask = CLOCKSOURCE_MASK(64),
.mult = 0, /* to be set */
.shift = 22,
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
};
/* Timer interrupt handler. */
static irqreturn_t vmi_timer_interrupt(int irq, void *dev_id);
static struct irqaction vmi_timer_irq = {
vmi_timer_interrupt,
SA_INTERRUPT,
CPU_MASK_NONE,
"VMI-alarm",
NULL,
NULL
};
/* Alarm rate */
static int __init vmi_timer_alarm_rate_setup(char* str)
{
int alarm_rate;
if (get_option(&str, &alarm_rate) == 1 && alarm_rate > 0) {
alarm_hz = alarm_rate;
printk(KERN_WARNING "VMI timer alarm HZ set to %d\n", alarm_hz);
}
return 1;
}
__setup("vmi_timer_alarm_hz=", vmi_timer_alarm_rate_setup);
/* Initialization */
static void vmi_get_wallclock_ts(struct timespec *ts)
{
unsigned long long wallclock;
wallclock = vmi_timer_ops.get_wallclock(); // nsec units
ts->tv_nsec = do_div(wallclock, 1000000000);
ts->tv_sec = wallclock;
}
static void update_xtime_from_wallclock(void)
{
struct timespec ts;
vmi_get_wallclock_ts(&ts);
do_settimeofday(&ts);
}
unsigned long vmi_get_wallclock(void)
{
struct timespec ts;
vmi_get_wallclock_ts(&ts);
return ts.tv_sec;
}
int vmi_set_wallclock(unsigned long now)
{
return -1;
}
unsigned long long vmi_sched_clock(void)
{
return read_available_cycles();
}
void __init vmi_time_init(void)
{
unsigned long long cycles_per_sec, cycles_per_msec;
unsigned long flags;
local_irq_save(flags);
setup_irq(0, &vmi_timer_irq);
#ifdef CONFIG_X86_LOCAL_APIC
set_intr_gate(LOCAL_TIMER_VECTOR, apic_vmi_timer_interrupt);
#endif
no_sync_cmos_clock = 1;
vmi_get_wallclock_ts(&xtime);
set_normalized_timespec(&wall_to_monotonic,
-xtime.tv_sec, -xtime.tv_nsec);
real_cycles_accounted_system = read_real_cycles();
update_xtime_from_wallclock();
per_cpu(process_times_cycles_accounted_cpu, 0) = read_available_cycles();
cycles_per_sec = vmi_timer_ops.get_cycle_frequency();
cycles_per_jiffy = cycles_per_sec;
(void)do_div(cycles_per_jiffy, HZ);
cycles_per_alarm = cycles_per_sec;
(void)do_div(cycles_per_alarm, alarm_hz);
cycles_per_msec = cycles_per_sec;
(void)do_div(cycles_per_msec, 1000);
cpu_khz = cycles_per_msec;
printk(KERN_WARNING "VMI timer cycles/sec = %llu ; cycles/jiffy = %llu ;"
"cycles/alarm = %llu\n", cycles_per_sec, cycles_per_jiffy,
cycles_per_alarm);
clocksource_vmi.mult = clocksource_khz2mult(cycles_per_msec,
clocksource_vmi.shift);
if (clocksource_register(&clocksource_vmi))
printk(KERN_WARNING "Error registering VMITIME clocksource.");
/* Disable PIT. */
outb_p(0x3a, PIT_MODE); /* binary, mode 5, LSB/MSB, ch 0 */
/* schedule the alarm. do this in phase with process_times_cycles_accounted_cpu
* reduce the latency calling update_process_times. */
vmi_timer_ops.set_alarm(
VMI_ALARM_WIRED_IRQ0 | VMI_ALARM_IS_PERIODIC | VMI_CYCLES_AVAILABLE,
per_cpu(process_times_cycles_accounted_cpu, 0) + cycles_per_alarm,
cycles_per_alarm);
local_irq_restore(flags);
}
#ifdef CONFIG_X86_LOCAL_APIC
void __init vmi_timer_setup_boot_alarm(void)
{
local_irq_disable();
/* Route the interrupt to the correct vector. */
apic_write_around(APIC_LVTT, LOCAL_TIMER_VECTOR);
/* Cancel the IRQ0 wired alarm, and setup the LVTT alarm. */
vmi_timer_ops.cancel_alarm(VMI_CYCLES_AVAILABLE);
vmi_timer_ops.set_alarm(
VMI_ALARM_WIRED_LVTT | VMI_ALARM_IS_PERIODIC | VMI_CYCLES_AVAILABLE,
per_cpu(process_times_cycles_accounted_cpu, 0) + cycles_per_alarm,
cycles_per_alarm);
local_irq_enable();
}
/* Initialize the time accounting variables for an AP on an SMP system.
* Also, set the local alarm for the AP. */
void __init vmi_timer_setup_secondary_alarm(void)
{
int cpu = smp_processor_id();
/* Route the interrupt to the correct vector. */
apic_write_around(APIC_LVTT, LOCAL_TIMER_VECTOR);
per_cpu(process_times_cycles_accounted_cpu, cpu) = read_available_cycles();
vmi_timer_ops.set_alarm(
VMI_ALARM_WIRED_LVTT | VMI_ALARM_IS_PERIODIC | VMI_CYCLES_AVAILABLE,
per_cpu(process_times_cycles_accounted_cpu, cpu) + cycles_per_alarm,
cycles_per_alarm);
}
#endif
/* Update system wide (real) time accounting (e.g. jiffies, xtime). */
static void vmi_account_real_cycles(unsigned long long cur_real_cycles)
{
long long cycles_not_accounted;
write_seqlock(&xtime_lock);
cycles_not_accounted = cur_real_cycles - real_cycles_accounted_system;
while (cycles_not_accounted >= cycles_per_jiffy) {
/* systems wide jiffies. */
do_timer(1);
cycles_not_accounted -= cycles_per_jiffy;
real_cycles_accounted_system += cycles_per_jiffy;
}
write_sequnlock(&xtime_lock);
}
/* Update per-cpu process times. */
static void vmi_account_process_times_cycles(struct pt_regs *regs, int cpu,
unsigned long long cur_process_times_cycles)
{
long long cycles_not_accounted;
cycles_not_accounted = cur_process_times_cycles -
per_cpu(process_times_cycles_accounted_cpu, cpu);
while (cycles_not_accounted >= cycles_per_jiffy) {
/* Account time to the current process. This includes
* calling into the scheduler to decrement the timeslice
* and possibly reschedule.*/
update_process_times(user_mode(regs));
/* XXX handle /proc/profile multiplier. */
profile_tick(CPU_PROFILING);
cycles_not_accounted -= cycles_per_jiffy;
per_cpu(process_times_cycles_accounted_cpu, cpu) += cycles_per_jiffy;
}
}
#ifdef CONFIG_NO_IDLE_HZ
/* Update per-cpu idle times. Used when a no-hz halt is ended. */
static void vmi_account_no_hz_idle_cycles(int cpu,
unsigned long long cur_process_times_cycles)
{
long long cycles_not_accounted;
unsigned long no_idle_hz_jiffies = 0;
cycles_not_accounted = cur_process_times_cycles -
per_cpu(process_times_cycles_accounted_cpu, cpu);
while (cycles_not_accounted >= cycles_per_jiffy) {
no_idle_hz_jiffies++;
cycles_not_accounted -= cycles_per_jiffy;
per_cpu(process_times_cycles_accounted_cpu, cpu) += cycles_per_jiffy;
}
/* Account time to the idle process. */
account_steal_time(idle_task(cpu), jiffies_to_cputime(no_idle_hz_jiffies));
}
#endif
/* Update per-cpu stolen time. */
static void vmi_account_stolen_cycles(int cpu,
unsigned long long cur_real_cycles,
unsigned long long cur_avail_cycles)
{
long long stolen_cycles_not_accounted;
unsigned long stolen_jiffies = 0;
if (cur_real_cycles < cur_avail_cycles)
return;
stolen_cycles_not_accounted = cur_real_cycles - cur_avail_cycles -
per_cpu(stolen_cycles_accounted_cpu, cpu);
while (stolen_cycles_not_accounted >= cycles_per_jiffy) {
stolen_jiffies++;
stolen_cycles_not_accounted -= cycles_per_jiffy;
per_cpu(stolen_cycles_accounted_cpu, cpu) += cycles_per_jiffy;
}
/* HACK: pass NULL to force time onto cpustat->steal. */
account_steal_time(NULL, jiffies_to_cputime(stolen_jiffies));
}
/* Body of either IRQ0 interrupt handler (UP no local-APIC) or
* local-APIC LVTT interrupt handler (UP & local-APIC or SMP). */
static void vmi_local_timer_interrupt(int cpu)
{
unsigned long long cur_real_cycles, cur_process_times_cycles;
cur_real_cycles = read_real_cycles();
cur_process_times_cycles = read_available_cycles();
/* Update system wide (real) time state (xtime, jiffies). */
vmi_account_real_cycles(cur_real_cycles);
/* Update per-cpu process times. */
vmi_account_process_times_cycles(get_irq_regs(), cpu, cur_process_times_cycles);
/* Update time stolen from this cpu by the hypervisor. */
vmi_account_stolen_cycles(cpu, cur_real_cycles, cur_process_times_cycles);
}
#ifdef CONFIG_NO_IDLE_HZ
/* Must be called only from idle loop, with interrupts disabled. */
int vmi_stop_hz_timer(void)
{
/* Note that cpu_set, cpu_clear are (SMP safe) atomic on x86. */
unsigned long seq, next;
unsigned long long real_cycles_expiry;
int cpu = smp_processor_id();
BUG_ON(!irqs_disabled());
if (sysctl_hz_timer != 0)
return 0;
cpu_set(cpu, nohz_cpu_mask);
smp_mb();
if (rcu_needs_cpu(cpu) || local_softirq_pending() ||
(next = next_timer_interrupt(),
time_before_eq(next, jiffies + HZ/CONFIG_VMI_ALARM_HZ))) {
cpu_clear(cpu, nohz_cpu_mask);
return 0;
}
/* Convert jiffies to the real cycle counter. */
do {
seq = read_seqbegin(&xtime_lock);
real_cycles_expiry = real_cycles_accounted_system +
(long)(next - jiffies) * cycles_per_jiffy;
} while (read_seqretry(&xtime_lock, seq));
/* This cpu is going idle. Disable the periodic alarm. */
vmi_timer_ops.cancel_alarm(VMI_CYCLES_AVAILABLE);
per_cpu(idle_start_jiffies, cpu) = jiffies;
/* Set the real time alarm to expire at the next event. */
vmi_timer_ops.set_alarm(
VMI_ALARM_WIRING | VMI_ALARM_IS_ONESHOT | VMI_CYCLES_REAL,
real_cycles_expiry, 0);
return 1;
}
static void vmi_reenable_hz_timer(int cpu)
{
/* For /proc/vmi/info idle_hz stat. */
per_cpu(vmi_idle_no_hz_jiffies, cpu) += jiffies - per_cpu(idle_start_jiffies, cpu);
per_cpu(vmi_idle_no_hz_irqs, cpu)++;
/* Don't bother explicitly cancelling the one-shot alarm -- at
* worse we will receive a spurious timer interrupt. */
vmi_timer_ops.set_alarm(
VMI_ALARM_WIRING | VMI_ALARM_IS_PERIODIC | VMI_CYCLES_AVAILABLE,
per_cpu(process_times_cycles_accounted_cpu, cpu) + cycles_per_alarm,
cycles_per_alarm);
/* Indicate this cpu is no longer nohz idle. */
cpu_clear(cpu, nohz_cpu_mask);
}
/* Called from interrupt handlers when (local) HZ timer is disabled. */
void vmi_account_time_restart_hz_timer(void)
{
unsigned long long cur_real_cycles, cur_process_times_cycles;
int cpu = smp_processor_id();
BUG_ON(!irqs_disabled());
/* Account the time during which the HZ timer was disabled. */
cur_real_cycles = read_real_cycles();
cur_process_times_cycles = read_available_cycles();
/* Update system wide (real) time state (xtime, jiffies). */
vmi_account_real_cycles(cur_real_cycles);
/* Update per-cpu idle times. */
vmi_account_no_hz_idle_cycles(cpu, cur_process_times_cycles);
/* Update time stolen from this cpu by the hypervisor. */
vmi_account_stolen_cycles(cpu, cur_real_cycles, cur_process_times_cycles);
/* Reenable the hz timer. */
vmi_reenable_hz_timer(cpu);
}
#endif /* CONFIG_NO_IDLE_HZ */
/* UP (and no local-APIC) VMI-timer alarm interrupt handler.
* Handler for IRQ0. Not used when SMP or X86_LOCAL_APIC after
* APIC setup and setup_boot_vmi_alarm() is called. */
static irqreturn_t vmi_timer_interrupt(int irq, void *dev_id)
{
vmi_local_timer_interrupt(smp_processor_id());
return IRQ_HANDLED;
}
#ifdef CONFIG_X86_LOCAL_APIC
/* SMP VMI-timer alarm interrupt handler. Handler for LVTT vector.
* Also used in UP when CONFIG_X86_LOCAL_APIC.
* The wrapper code is from arch/i386/kernel/apic.c#smp_apic_timer_interrupt. */
void smp_apic_vmi_timer_interrupt(struct pt_regs *regs)
{
struct pt_regs *old_regs = set_irq_regs(regs);
int cpu = smp_processor_id();
/*
* the NMI deadlock-detector uses this.
*/
per_cpu(irq_stat,cpu).apic_timer_irqs++;
/*
* NOTE! We'd better ACK the irq immediately,
* because timer handling can be slow.
*/
ack_APIC_irq();
/*
* update_process_times() expects us to have done irq_enter().
* Besides, if we don't timer interrupts ignore the global
* interrupt lock, which is the WrongThing (tm) to do.
*/
irq_enter();
vmi_local_timer_interrupt(cpu);
irq_exit();
set_irq_regs(old_regs);
}
#endif /* CONFIG_X86_LOCAL_APIC */