Piteball/android_kernel_samsung_msm8976
1
1
Fork 0
mirror of https://github.com/team-infusion-developers/android_kernel_samsung_msm8976.git synced 2024-10-12 14:43:11 +00:00
Code Issues Projects Releases Wiki Activity
android_kernel_samsung_msm8976/drivers/ide/pci/siimage.c
John W. Linville d868dd19ad [PATCH] siimage: enable interrupts on Adaptec SA-1210 card 
The siimage driver proports to support the Adaptec SA-1210 SATA
controller.  However, at least some of those cards boot-up with their
interrupts disabled internally.  The siimage driver currently ignores
that fact, so that driver does not actually work with those cards.
This patch enables those interrupts on cards that need it.

[ This is implemented based on similar code in the libata-based
  sata_sil driver. ]

Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2005-11-10 00:19:14 +01:00

1142 lines
28 KiB
C
Raw Blame History

/*
* linux/drivers/ide/pci/siimage.c Version 1.07 Nov 30, 2003
*
* Copyright (C) 2001-2002 Andre Hedrick <andre@linux-ide.org>
* Copyright (C) 2003 Red Hat <alan@redhat.com>
*
* May be copied or modified under the terms of the GNU General Public License
*
* Documentation available under NDA only
*
*
* FAQ Items:
* If you are using Marvell SATA-IDE adapters with Maxtor drives
* ensure the system is set up for ATA100/UDMA5 not UDMA6.
*
* If you are using WD drives with SATA bridges you must set the
* drive to "Single". "Master" will hang
*
* If you have strange problems with nVidia chipset systems please
* see the SI support documentation and update your system BIOS
* if neccessary
*/
#include <linux/config.h>
#include <linux/types.h>
#include <linux/module.h>
#include <linux/pci.h>
#include <linux/delay.h>
#include <linux/hdreg.h>
#include <linux/ide.h>
#include <linux/init.h>
#include <asm/io.h>
#undef SIIMAGE_VIRTUAL_DMAPIO
#undef SIIMAGE_LARGE_DMA
/**
* pdev_is_sata - check if device is SATA
* @pdev: PCI device to check
*
* Returns true if this is a SATA controller
*/
static int pdev_is_sata(struct pci_dev *pdev)
{
switch(pdev->device)
{
case PCI_DEVICE_ID_SII_3112:
case PCI_DEVICE_ID_SII_1210SA:
return 1;
case PCI_DEVICE_ID_SII_680:
return 0;
}
BUG();
return 0;
}
/**
* is_sata - check if hwif is SATA
* @hwif: interface to check
*
* Returns true if this is a SATA controller
*/
static inline int is_sata(ide_hwif_t *hwif)
{
return pdev_is_sata(hwif->pci_dev);
}
/**
* siimage_selreg - return register base
* @hwif: interface
* @r: config offset
*
* Turn a config register offset into the right address in either
* PCI space or MMIO space to access the control register in question
* Thankfully this is a configuration operation so isnt performance
* criticial.
*/
static unsigned long siimage_selreg(ide_hwif_t *hwif, int r)
{
unsigned long base = (unsigned long)hwif->hwif_data;
base += 0xA0 + r;
if(hwif->mmio)
base += (hwif->channel << 6);
else
base += (hwif->channel << 4);
return base;
}
/**
* siimage_seldev - return register base
* @hwif: interface
* @r: config offset
*
* Turn a config register offset into the right address in either
* PCI space or MMIO space to access the control register in question
* including accounting for the unit shift.
*/
static inline unsigned long siimage_seldev(ide_drive_t *drive, int r)
{
ide_hwif_t *hwif = HWIF(drive);
unsigned long base = (unsigned long)hwif->hwif_data;
base += 0xA0 + r;
if(hwif->mmio)
base += (hwif->channel << 6);
else
base += (hwif->channel << 4);
base |= drive->select.b.unit << drive->select.b.unit;
return base;
}
/**
* siimage_ratemask - Compute available modes
* @drive: IDE drive
*
* Compute the available speeds for the devices on the interface.
* For the CMD680 this depends on the clocking mode (scsc), for the
* SI3312 SATA controller life is a bit simpler. Enforce UDMA33
* as a limit if there is no 80pin cable present.
*/
static byte siimage_ratemask (ide_drive_t *drive)
{
ide_hwif_t *hwif = HWIF(drive);
u8 mode = 0, scsc = 0;
unsigned long base = (unsigned long) hwif->hwif_data;
if (hwif->mmio)
scsc = hwif->INB(base + 0x4A);
else
pci_read_config_byte(hwif->pci_dev, 0x8A, &scsc);
if(is_sata(hwif))
{
if(strstr(drive->id->model, "Maxtor"))
return 3;
return 4;
}
if ((scsc & 0x30) == 0x10) /* 133 */
mode = 4;
else if ((scsc & 0x30) == 0x20) /* 2xPCI */
mode = 4;
else if ((scsc & 0x30) == 0x00) /* 100 */
mode = 3;
else /* Disabled ? */
BUG();
if (!eighty_ninty_three(drive))
mode = min(mode, (u8)1);
return mode;
}
/**
* siimage_taskfile_timing - turn timing data to a mode
* @hwif: interface to query
*
* Read the timing data for the interface and return the
* mode that is being used.
*/
static byte siimage_taskfile_timing (ide_hwif_t *hwif)
{
u16 timing = 0x328a;
unsigned long addr = siimage_selreg(hwif, 2);
if (hwif->mmio)
timing = hwif->INW(addr);
else
pci_read_config_word(hwif->pci_dev, addr, &timing);
switch (timing) {
case 0x10c1: return 4;
case 0x10c3: return 3;
case 0x1104:
case 0x1281: return 2;
case 0x2283: return 1;
case 0x328a:
default: return 0;
}
}
/**
* simmage_tuneproc - tune a drive
* @drive: drive to tune
* @mode_wanted: the target operating mode
*
* Load the timing settings for this device mode into the
* controller. If we are in PIO mode 3 or 4 turn on IORDY
* monitoring (bit 9). The TF timing is bits 31:16
*/
static void siimage_tuneproc (ide_drive_t *drive, byte mode_wanted)
{
ide_hwif_t *hwif = HWIF(drive);
u32 speedt = 0;
u16 speedp = 0;
unsigned long addr = siimage_seldev(drive, 0x04);
unsigned long tfaddr = siimage_selreg(hwif, 0x02);
/* cheat for now and use the docs */
switch(mode_wanted) {
case 4:
speedp = 0x10c1;
speedt = 0x10c1;
break;
case 3:
speedp = 0x10C3;
speedt = 0x10C3;
break;
case 2:
speedp = 0x1104;
speedt = 0x1281;
break;
case 1:
speedp = 0x2283;
speedt = 0x1281;
break;
case 0:
default:
speedp = 0x328A;
speedt = 0x328A;
break;
}
if (hwif->mmio)
{
hwif->OUTW(speedt, addr);
hwif->OUTW(speedp, tfaddr);
/* Now set up IORDY */
if(mode_wanted == 3 || mode_wanted == 4)
hwif->OUTW(hwif->INW(tfaddr-2)|0x200, tfaddr-2);
else
hwif->OUTW(hwif->INW(tfaddr-2)&~0x200, tfaddr-2);
}
else
{
pci_write_config_word(hwif->pci_dev, addr, speedp);
pci_write_config_word(hwif->pci_dev, tfaddr, speedt);
pci_read_config_word(hwif->pci_dev, tfaddr-2, &speedp);
speedp &= ~0x200;
/* Set IORDY for mode 3 or 4 */
if(mode_wanted == 3 || mode_wanted == 4)
speedp |= 0x200;
pci_write_config_word(hwif->pci_dev, tfaddr-2, speedp);
}
}
/**
* config_siimage_chipset_for_pio - set drive timings
* @drive: drive to tune
* @speed we want
*
* Compute the best pio mode we can for a given device. Also honour
* the timings for the driver when dealing with mixed devices. Some
* of this is ugly but its all wrapped up here
*
* The SI680 can also do VDMA - we need to start using that
*
* FIXME: we use the BIOS channel timings to avoid driving the task
* files too fast at the disk. We need to compute the master/slave
* drive PIO mode properly so that we can up the speed on a hotplug
* system.
*/
static void config_siimage_chipset_for_pio (ide_drive_t *drive, byte set_speed)
{
u8 channel_timings = siimage_taskfile_timing(HWIF(drive));
u8 speed = 0, set_pio = ide_get_best_pio_mode(drive, 4, 5, NULL);
/* WARNING PIO timing mess is going to happen b/w devices, argh */
if ((channel_timings != set_pio) && (set_pio > channel_timings))
set_pio = channel_timings;
siimage_tuneproc(drive, set_pio);
speed = XFER_PIO_0 + set_pio;
if (set_speed)
(void) ide_config_drive_speed(drive, speed);
}
static void config_chipset_for_pio (ide_drive_t *drive, byte set_speed)
{
config_siimage_chipset_for_pio(drive, set_speed);
}
/**
* siimage_tune_chipset - set controller timings
* @drive: Drive to set up
* @xferspeed: speed we want to achieve
*
* Tune the SII chipset for the desired mode. If we can't achieve
* the desired mode then tune for a lower one, but ultimately
* make the thing work.
*/
static int siimage_tune_chipset (ide_drive_t *drive, byte xferspeed)
{
u8 ultra6[] = { 0x0F, 0x0B, 0x07, 0x05, 0x03, 0x02, 0x01 };
u8 ultra5[] = { 0x0C, 0x07, 0x05, 0x04, 0x02, 0x01 };
u16 dma[] = { 0x2208, 0x10C2, 0x10C1 };
ide_hwif_t *hwif = HWIF(drive);
u16 ultra = 0, multi = 0;
u8 mode = 0, unit = drive->select.b.unit;
u8 speed = ide_rate_filter(siimage_ratemask(drive), xferspeed);
unsigned long base = (unsigned long)hwif->hwif_data;
u8 scsc = 0, addr_mask = ((hwif->channel) ?
((hwif->mmio) ? 0xF4 : 0x84) :
((hwif->mmio) ? 0xB4 : 0x80));
unsigned long ma = siimage_seldev(drive, 0x08);
unsigned long ua = siimage_seldev(drive, 0x0C);
if (hwif->mmio) {
scsc = hwif->INB(base + 0x4A);
mode = hwif->INB(base + addr_mask);
multi = hwif->INW(ma);
ultra = hwif->INW(ua);
} else {
pci_read_config_byte(hwif->pci_dev, 0x8A, &scsc);
pci_read_config_byte(hwif->pci_dev, addr_mask, &mode);
pci_read_config_word(hwif->pci_dev, ma, &multi);
pci_read_config_word(hwif->pci_dev, ua, &ultra);
}
mode &= ~((unit) ? 0x30 : 0x03);
ultra &= ~0x3F;
scsc = ((scsc & 0x30) == 0x00) ? 0 : 1;
scsc = is_sata(hwif) ? 1 : scsc;
switch(speed) {
case XFER_PIO_4:
case XFER_PIO_3:
case XFER_PIO_2:
case XFER_PIO_1:
case XFER_PIO_0:
siimage_tuneproc(drive, (speed - XFER_PIO_0));
mode |= ((unit) ? 0x10 : 0x01);
break;
case XFER_MW_DMA_2:
case XFER_MW_DMA_1:
case XFER_MW_DMA_0:
multi = dma[speed - XFER_MW_DMA_0];
mode |= ((unit) ? 0x20 : 0x02);
config_siimage_chipset_for_pio(drive, 0);
break;
case XFER_UDMA_6:
case XFER_UDMA_5:
case XFER_UDMA_4:
case XFER_UDMA_3:
case XFER_UDMA_2:
case XFER_UDMA_1:
case XFER_UDMA_0:
multi = dma[2];
ultra |= ((scsc) ? (ultra6[speed - XFER_UDMA_0]) :
(ultra5[speed - XFER_UDMA_0]));
mode |= ((unit) ? 0x30 : 0x03);
config_siimage_chipset_for_pio(drive, 0);
break;
default:
return 1;
}
if (hwif->mmio) {
hwif->OUTB(mode, base + addr_mask);
hwif->OUTW(multi, ma);
hwif->OUTW(ultra, ua);
} else {
pci_write_config_byte(hwif->pci_dev, addr_mask, mode);
pci_write_config_word(hwif->pci_dev, ma, multi);
pci_write_config_word(hwif->pci_dev, ua, ultra);
}
return (ide_config_drive_speed(drive, speed));
}
/**
* config_chipset_for_dma - configure for DMA
* @drive: drive to configure
*
* Called by the IDE layer when it wants the timings set up.
* For the CMD680 we also need to set up the PIO timings and
* enable DMA.
*/
static int config_chipset_for_dma (ide_drive_t *drive)
{
u8 speed = ide_dma_speed(drive, siimage_ratemask(drive));
config_chipset_for_pio(drive, !speed);
if (!speed)
return 0;
if (ide_set_xfer_rate(drive, speed))
return 0;
if (!drive->init_speed)
drive->init_speed = speed;
return ide_dma_enable(drive);
}
/**
* siimage_configure_drive_for_dma - set up for DMA transfers
* @drive: drive we are going to set up
*
* Set up the drive for DMA, tune the controller and drive as
* required. If the drive isn't suitable for DMA or we hit
* other problems then we will drop down to PIO and set up
* PIO appropriately
*/
static int siimage_config_drive_for_dma (ide_drive_t *drive)
{
ide_hwif_t *hwif = HWIF(drive);
struct hd_driveid *id = drive->id;
if ((id->capability & 1) != 0 && drive->autodma) {
if (ide_use_dma(drive)) {
if (config_chipset_for_dma(drive))
return hwif->ide_dma_on(drive);
}
goto fast_ata_pio;
} else if ((id->capability & 8) || (id->field_valid & 2)) {
fast_ata_pio:
config_chipset_for_pio(drive, 1);
return hwif->ide_dma_off_quietly(drive);
}
/* IORDY not supported */
return 0;
}
/* returns 1 if dma irq issued, 0 otherwise */
static int siimage_io_ide_dma_test_irq (ide_drive_t *drive)
{
ide_hwif_t *hwif = HWIF(drive);
u8 dma_altstat = 0;
unsigned long addr = siimage_selreg(hwif, 1);
/* return 1 if INTR asserted */
if ((hwif->INB(hwif->dma_status) & 4) == 4)
return 1;
/* return 1 if Device INTR asserted */
pci_read_config_byte(hwif->pci_dev, addr, &dma_altstat);
if (dma_altstat & 8)
return 0; //return 1;
return 0;
}
#if 0
/**
* siimage_mmio_ide_dma_count - DMA bytes done
* @drive
*
* If we are doing VDMA the CMD680 requires a little bit
* of more careful handling and we have to read the counts
* off ourselves. For non VDMA life is normal.
*/
static int siimage_mmio_ide_dma_count (ide_drive_t *drive)
{
#ifdef SIIMAGE_VIRTUAL_DMAPIO
struct request *rq = HWGROUP(drive)->rq;
ide_hwif_t *hwif = HWIF(drive);
u32 count = (rq->nr_sectors * SECTOR_SIZE);
u32 rcount = 0;
unsigned long addr = siimage_selreg(hwif, 0x1C);
hwif->OUTL(count, addr);
rcount = hwif->INL(addr);
printk("\n%s: count = %d, rcount = %d, nr_sectors = %lu\n",
drive->name, count, rcount, rq->nr_sectors);
#endif /* SIIMAGE_VIRTUAL_DMAPIO */
return __ide_dma_count(drive);
}
#endif
/**
* siimage_mmio_ide_dma_test_irq - check we caused an IRQ
* @drive: drive we are testing
*
* Check if we caused an IDE DMA interrupt. We may also have caused
* SATA status interrupts, if so we clean them up and continue.
*/
static int siimage_mmio_ide_dma_test_irq (ide_drive_t *drive)
{
ide_hwif_t *hwif = HWIF(drive);
unsigned long base = (unsigned long)hwif->hwif_data;
unsigned long addr = siimage_selreg(hwif, 0x1);
if (SATA_ERROR_REG) {
u32 ext_stat = hwif->INL(base + 0x10);
u8 watchdog = 0;
if (ext_stat & ((hwif->channel) ? 0x40 : 0x10)) {
u32 sata_error = hwif->INL(SATA_ERROR_REG);
hwif->OUTL(sata_error, SATA_ERROR_REG);
watchdog = (sata_error & 0x00680000) ? 1 : 0;
#if 1
printk(KERN_WARNING "%s: sata_error = 0x%08x, "
"watchdog = %d, %s\n",
drive->name, sata_error, watchdog,
__FUNCTION__);
#endif
} else {
watchdog = (ext_stat & 0x8000) ? 1 : 0;
}
ext_stat >>= 16;
if (!(ext_stat & 0x0404) && !watchdog)
return 0;
}
/* return 1 if INTR asserted */
if ((hwif->INB(hwif->dma_status) & 0x04) == 0x04)
return 1;
/* return 1 if Device INTR asserted */
if ((hwif->INB(addr) & 8) == 8)
return 0; //return 1;
return 0;
}
/**
* siimage_busproc - bus isolation ioctl
* @drive: drive to isolate/restore
* @state: bus state to set
*
* Used by the SII3112 to handle bus isolation. As this is a
* SATA controller the work required is quite limited, we
* just have to clean up the statistics
*/
static int siimage_busproc (ide_drive_t * drive, int state)
{
ide_hwif_t *hwif = HWIF(drive);
u32 stat_config = 0;
unsigned long addr = siimage_selreg(hwif, 0);
if (hwif->mmio) {
stat_config = hwif->INL(addr);
} else
pci_read_config_dword(hwif->pci_dev, addr, &stat_config);
switch (state) {
case BUSSTATE_ON:
hwif->drives[0].failures = 0;
hwif->drives[1].failures = 0;
break;
case BUSSTATE_OFF:
hwif->drives[0].failures = hwif->drives[0].max_failures + 1;
hwif->drives[1].failures = hwif->drives[1].max_failures + 1;
break;
case BUSSTATE_TRISTATE:
hwif->drives[0].failures = hwif->drives[0].max_failures + 1;
hwif->drives[1].failures = hwif->drives[1].max_failures + 1;
break;
default:
return -EINVAL;
}
hwif->bus_state = state;
return 0;
}
/**
* siimage_reset_poll - wait for sata reset
* @drive: drive we are resetting
*
* Poll the SATA phy and see whether it has come back from the dead
* yet.
*/
static int siimage_reset_poll (ide_drive_t *drive)
{
if (SATA_STATUS_REG) {
ide_hwif_t *hwif = HWIF(drive);
if ((hwif->INL(SATA_STATUS_REG) & 0x03) != 0x03) {
printk(KERN_WARNING "%s: reset phy dead, status=0x%08x\n",
hwif->name, hwif->INL(SATA_STATUS_REG));
HWGROUP(drive)->polling = 0;
return ide_started;
}
return 0;
} else {
return 0;
}
}
/**
* siimage_pre_reset - reset hook
* @drive: IDE device being reset
*
* For the SATA devices we need to handle recalibration/geometry
* differently
*/
static void siimage_pre_reset (ide_drive_t *drive)
{
if (drive->media != ide_disk)
return;
if (is_sata(HWIF(drive)))
{
drive->special.b.set_geometry = 0;
drive->special.b.recalibrate = 0;
}
}
/**
* siimage_reset - reset a device on an siimage controller
* @drive: drive to reset
*
* Perform a controller level reset fo the device. For
* SATA we must also check the PHY.
*/
static void siimage_reset (ide_drive_t *drive)
{
ide_hwif_t *hwif = HWIF(drive);
u8 reset = 0;
unsigned long addr = siimage_selreg(hwif, 0);
if (hwif->mmio) {
reset = hwif->INB(addr);
hwif->OUTB((reset|0x03), addr);
/* FIXME:posting */
udelay(25);
hwif->OUTB(reset, addr);
(void) hwif->INB(addr);
} else {
pci_read_config_byte(hwif->pci_dev, addr, &reset);
pci_write_config_byte(hwif->pci_dev, addr, reset|0x03);
udelay(25);
pci_write_config_byte(hwif->pci_dev, addr, reset);
pci_read_config_byte(hwif->pci_dev, addr, &reset);
}
if (SATA_STATUS_REG) {
u32 sata_stat = hwif->INL(SATA_STATUS_REG);
printk(KERN_WARNING "%s: reset phy, status=0x%08x, %s\n",
hwif->name, sata_stat, __FUNCTION__);
if (!(sata_stat)) {
printk(KERN_WARNING "%s: reset phy dead, status=0x%08x\n",
hwif->name, sata_stat);
drive->failures++;
}
}
}
/**
* proc_reports_siimage - add siimage controller to proc
* @dev: PCI device
* @clocking: SCSC value
* @name: controller name
*
* Report the clocking mode of the controller and add it to
* the /proc interface layer
*/
static void proc_reports_siimage (struct pci_dev *dev, u8 clocking, const char *name)
{
if (!pdev_is_sata(dev)) {
printk(KERN_INFO "%s: BASE CLOCK ", name);
clocking &= 0x03;
switch (clocking) {
case 0x03: printk("DISABLED!\n"); break;
case 0x02: printk("== 2X PCI\n"); break;
case 0x01: printk("== 133\n"); break;
case 0x00: printk("== 100\n"); break;
}
}
}
/**
* setup_mmio_siimage - switch an SI controller into MMIO
* @dev: PCI device we are configuring
* @name: device name
*
* Attempt to put the device into mmio mode. There are some slight
* complications here with certain systems where the mmio bar isnt
* mapped so we have to be sure we can fall back to I/O.
*/
static unsigned int setup_mmio_siimage (struct pci_dev *dev, const char *name)
{
unsigned long bar5 = pci_resource_start(dev, 5);
unsigned long barsize = pci_resource_len(dev, 5);
u8 tmpbyte = 0;
void __iomem *ioaddr;
u32 tmp, irq_mask;
/*
* Drop back to PIO if we can't map the mmio. Some
* systems seem to get terminally confused in the PCI
* spaces.
*/
if(!request_mem_region(bar5, barsize, name))
{
printk(KERN_WARNING "siimage: IDE controller MMIO ports not available.\n");
return 0;
}
ioaddr = ioremap(bar5, barsize);
if (ioaddr == NULL)
{
release_mem_region(bar5, barsize);
return 0;
}
pci_set_master(dev);
pci_set_drvdata(dev, (void *) ioaddr);
if (pdev_is_sata(dev)) {
/* make sure IDE0/1 interrupts are not masked */
irq_mask = (1 << 22) | (1 << 23);
tmp = readl(ioaddr + 0x48);
if (tmp & irq_mask) {
tmp &= ~irq_mask;
writel(tmp, ioaddr + 0x48);
readl(ioaddr + 0x48); /* flush */
}
writel(0, ioaddr + 0x148);
writel(0, ioaddr + 0x1C8);
}
writeb(0, ioaddr + 0xB4);
writeb(0, ioaddr + 0xF4);
tmpbyte = readb(ioaddr + 0x4A);
switch(tmpbyte & 0x30) {
case 0x00:
/* In 100 MHz clocking, try and switch to 133 */
writeb(tmpbyte|0x10, ioaddr + 0x4A);
break;
case 0x10:
/* On 133Mhz clocking */
break;
case 0x20:
/* On PCIx2 clocking */
break;
case 0x30:
/* Clocking is disabled */
/* 133 clock attempt to force it on */
writeb(tmpbyte & ~0x20, ioaddr + 0x4A);
break;
}
writeb( 0x72, ioaddr + 0xA1);
writew( 0x328A, ioaddr + 0xA2);
writel(0x62DD62DD, ioaddr + 0xA4);
writel(0x43924392, ioaddr + 0xA8);
writel(0x40094009, ioaddr + 0xAC);
writeb( 0x72, ioaddr + 0xE1);
writew( 0x328A, ioaddr + 0xE2);
writel(0x62DD62DD, ioaddr + 0xE4);
writel(0x43924392, ioaddr + 0xE8);
writel(0x40094009, ioaddr + 0xEC);
if (pdev_is_sata(dev)) {
writel(0xFFFF0000, ioaddr + 0x108);
writel(0xFFFF0000, ioaddr + 0x188);
writel(0x00680000, ioaddr + 0x148);
writel(0x00680000, ioaddr + 0x1C8);
}
tmpbyte = readb(ioaddr + 0x4A);
proc_reports_siimage(dev, (tmpbyte>>4), name);
return 1;
}
/**
* init_chipset_siimage - set up an SI device
* @dev: PCI device
* @name: device name
*
* Perform the initial PCI set up for this device. Attempt to switch
* to 133MHz clocking if the system isn't already set up to do it.
*/
static unsigned int __devinit init_chipset_siimage(struct pci_dev *dev, const char *name)
{
u32 class_rev = 0;
u8 tmpbyte = 0;
u8 BA5_EN = 0;
pci_read_config_dword(dev, PCI_CLASS_REVISION, &class_rev);
class_rev &= 0xff;
pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, (class_rev) ? 1 : 255);
pci_read_config_byte(dev, 0x8A, &BA5_EN);
if ((BA5_EN & 0x01) || (pci_resource_start(dev, 5))) {
if (setup_mmio_siimage(dev, name)) {
return 0;
}
}
pci_write_config_byte(dev, 0x80, 0x00);
pci_write_config_byte(dev, 0x84, 0x00);
pci_read_config_byte(dev, 0x8A, &tmpbyte);
switch(tmpbyte & 0x30) {
case 0x00:
/* 133 clock attempt to force it on */
pci_write_config_byte(dev, 0x8A, tmpbyte|0x10);
case 0x30:
/* if clocking is disabled */
/* 133 clock attempt to force it on */
pci_write_config_byte(dev, 0x8A, tmpbyte & ~0x20);
case 0x10:
/* 133 already */
break;
case 0x20:
/* BIOS set PCI x2 clocking */
break;
}
pci_read_config_byte(dev, 0x8A, &tmpbyte);
pci_write_config_byte(dev, 0xA1, 0x72);
pci_write_config_word(dev, 0xA2, 0x328A);
pci_write_config_dword(dev, 0xA4, 0x62DD62DD);
pci_write_config_dword(dev, 0xA8, 0x43924392);
pci_write_config_dword(dev, 0xAC, 0x40094009);
pci_write_config_byte(dev, 0xB1, 0x72);
pci_write_config_word(dev, 0xB2, 0x328A);
pci_write_config_dword(dev, 0xB4, 0x62DD62DD);
pci_write_config_dword(dev, 0xB8, 0x43924392);
pci_write_config_dword(dev, 0xBC, 0x40094009);
proc_reports_siimage(dev, (tmpbyte>>4), name);
return 0;
}
/**
* init_mmio_iops_siimage - set up the iops for MMIO
* @hwif: interface to set up
*
* The basic setup here is fairly simple, we can use standard MMIO
* operations. However we do have to set the taskfile register offsets
* by hand as there isnt a standard defined layout for them this
* time.
*
* The hardware supports buffered taskfiles and also some rather nice
* extended PRD tables. Unfortunately right now we don't.
*/
static void __devinit init_mmio_iops_siimage(ide_hwif_t *hwif)
{
struct pci_dev *dev = hwif->pci_dev;
void *addr = pci_get_drvdata(dev);
u8 ch = hwif->channel;
hw_regs_t hw;
unsigned long base;
/*
* Fill in the basic HWIF bits
*/
default_hwif_mmiops(hwif);
hwif->hwif_data = addr;
/*
* Now set up the hw. We have to do this ourselves as
* the MMIO layout isnt the same as the the standard port
* based I/O
*/
memset(&hw, 0, sizeof(hw_regs_t));
base = (unsigned long)addr;
if (ch)
base += 0xC0;
else
base += 0x80;
/*
* The buffered task file doesn't have status/control
* so we can't currently use it sanely since we want to
* use LBA48 mode.
*/
// base += 0x10;
// hwif->no_lba48 = 1;
hw.io_ports[IDE_DATA_OFFSET] = base;
hw.io_ports[IDE_ERROR_OFFSET] = base + 1;
hw.io_ports[IDE_NSECTOR_OFFSET] = base + 2;
hw.io_ports[IDE_SECTOR_OFFSET] = base + 3;
hw.io_ports[IDE_LCYL_OFFSET] = base + 4;
hw.io_ports[IDE_HCYL_OFFSET] = base + 5;
hw.io_ports[IDE_SELECT_OFFSET] = base + 6;
hw.io_ports[IDE_STATUS_OFFSET] = base + 7;
hw.io_ports[IDE_CONTROL_OFFSET] = base + 10;
hw.io_ports[IDE_IRQ_OFFSET] = 0;
if (pdev_is_sata(dev)) {
base = (unsigned long)addr;
if (ch)
base += 0x80;
hwif->sata_scr[SATA_STATUS_OFFSET] = base + 0x104;
hwif->sata_scr[SATA_ERROR_OFFSET] = base + 0x108;
hwif->sata_scr[SATA_CONTROL_OFFSET] = base + 0x100;
hwif->sata_misc[SATA_MISC_OFFSET] = base + 0x140;
hwif->sata_misc[SATA_PHY_OFFSET] = base + 0x144;
hwif->sata_misc[SATA_IEN_OFFSET] = base + 0x148;
}
hw.irq = hwif->pci_dev->irq;
memcpy(&hwif->hw, &hw, sizeof(hw));
memcpy(hwif->io_ports, hwif->hw.io_ports, sizeof(hwif->hw.io_ports));
hwif->irq = hw.irq;
base = (unsigned long) addr;
#ifdef SIIMAGE_LARGE_DMA
/* Watch the brackets - even Ken and Dennis get some language design wrong */
hwif->dma_base = base + (ch ? 0x18 : 0x10);
hwif->dma_base2 = base + (ch ? 0x08 : 0x00);
hwif->dma_prdtable = hwif->dma_base2 + 4;
#else /* ! SIIMAGE_LARGE_DMA */
hwif->dma_base = base + (ch ? 0x08 : 0x00);
hwif->dma_base2 = base + (ch ? 0x18 : 0x10);
#endif /* SIIMAGE_LARGE_DMA */
hwif->mmio = 2;
}
static int is_dev_seagate_sata(ide_drive_t *drive)
{
const char *s = &drive->id->model[0];
unsigned len;
if (!drive->present)
return 0;
len = strnlen(s, sizeof(drive->id->model));
if ((len > 4) && (!memcmp(s, "ST", 2))) {
if ((!memcmp(s + len - 2, "AS", 2)) ||
(!memcmp(s + len - 3, "ASL", 3))) {
printk(KERN_INFO "%s: applying pessimistic Seagate "
"errata fix\n", drive->name);
return 1;
}
}
return 0;
}
/**
* siimage_fixup - post probe fixups
* @hwif: interface to fix up
*
* Called after drive probe we use this to decide whether the
* Seagate fixup must be applied. This used to be in init_iops but
* that can occur before we know what drives are present.
*/
static void __devinit siimage_fixup(ide_hwif_t *hwif)
{
/* Try and raise the rqsize */
if (!is_sata(hwif) || !is_dev_seagate_sata(&hwif->drives[0]))
hwif->rqsize = 128;
}
/**
* init_iops_siimage - set up iops
* @hwif: interface to set up
*
* Do the basic setup for the SIIMAGE hardware interface
* and then do the MMIO setup if we can. This is the first
* look in we get for setting up the hwif so that we
* can get the iops right before using them.
*/
static void __devinit init_iops_siimage(ide_hwif_t *hwif)
{
struct pci_dev *dev = hwif->pci_dev;
u32 class_rev = 0;
pci_read_config_dword(dev, PCI_CLASS_REVISION, &class_rev);
class_rev &= 0xff;
hwif->hwif_data = NULL;
/* Pessimal until we finish probing */
hwif->rqsize = 15;
if (pci_get_drvdata(dev) == NULL)
return;
init_mmio_iops_siimage(hwif);
}
/**
* ata66_siimage - check for 80 pin cable
* @hwif: interface to check
*
* Check for the presence of an ATA66 capable cable on the
* interface.
*/
static unsigned int __devinit ata66_siimage(ide_hwif_t *hwif)
{
unsigned long addr = siimage_selreg(hwif, 0);
if (pci_get_drvdata(hwif->pci_dev) == NULL) {
u8 ata66 = 0;
pci_read_config_byte(hwif->pci_dev, addr, &ata66);
return (ata66 & 0x01) ? 1 : 0;
}
return (hwif->INB(addr) & 0x01) ? 1 : 0;
}
/**
* init_hwif_siimage - set up hwif structs
* @hwif: interface to set up
*
* We do the basic set up of the interface structure. The SIIMAGE
* requires several custom handlers so we override the default
* ide DMA handlers appropriately
*/
static void __devinit init_hwif_siimage(ide_hwif_t *hwif)
{
hwif->autodma = 0;
hwif->resetproc = &siimage_reset;
hwif->speedproc = &siimage_tune_chipset;
hwif->tuneproc = &siimage_tuneproc;
hwif->reset_poll = &siimage_reset_poll;
hwif->pre_reset = &siimage_pre_reset;
if(is_sata(hwif))
hwif->busproc = &siimage_busproc;
if (!hwif->dma_base) {
hwif->drives[0].autotune = 1;
hwif->drives[1].autotune = 1;
return;
}
hwif->ultra_mask = 0x7f;
hwif->mwdma_mask = 0x07;
hwif->swdma_mask = 0x07;
if (!is_sata(hwif))
hwif->atapi_dma = 1;
hwif->ide_dma_check = &siimage_config_drive_for_dma;
if (!(hwif->udma_four))
hwif->udma_four = ata66_siimage(hwif);
if (hwif->mmio) {
hwif->ide_dma_test_irq = &siimage_mmio_ide_dma_test_irq;
} else {
hwif->ide_dma_test_irq = & siimage_io_ide_dma_test_irq;
}
/*
* The BIOS often doesn't set up DMA on this controller
* so we always do it.
*/
hwif->autodma = 1;
hwif->drives[0].autodma = hwif->autodma;
hwif->drives[1].autodma = hwif->autodma;
}
#define DECLARE_SII_DEV(name_str) \
{ \
.name = name_str, \
.init_chipset = init_chipset_siimage, \
.init_iops = init_iops_siimage, \
.init_hwif = init_hwif_siimage, \
.fixup = siimage_fixup, \
.channels = 2, \
.autodma = AUTODMA, \
.bootable = ON_BOARD, \
}
static ide_pci_device_t siimage_chipsets[] __devinitdata = {
/* 0 */ DECLARE_SII_DEV("SiI680"),
/* 1 */ DECLARE_SII_DEV("SiI3112 Serial ATA"),
/* 2 */ DECLARE_SII_DEV("Adaptec AAR-1210SA")
};
/**
* siimage_init_one - pci layer discovery entry
* @dev: PCI device
* @id: ident table entry
*
* Called by the PCI code when it finds an SI680 or SI3112 controller.
* We then use the IDE PCI generic helper to do most of the work.
*/
static int __devinit siimage_init_one(struct pci_dev *dev, const struct pci_device_id *id)
{
return ide_setup_pci_device(dev, &siimage_chipsets[id->driver_data]);
}
static struct pci_device_id siimage_pci_tbl[] = {
{ PCI_VENDOR_ID_CMD, PCI_DEVICE_ID_SII_680, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
#ifdef CONFIG_BLK_DEV_IDE_SATA
{ PCI_VENDOR_ID_CMD, PCI_DEVICE_ID_SII_3112, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1},
{ PCI_VENDOR_ID_CMD, PCI_DEVICE_ID_SII_1210SA, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 2},
#endif
{ 0, },
};
MODULE_DEVICE_TABLE(pci, siimage_pci_tbl);
static struct pci_driver driver = {
.name = "SiI_IDE",
.id_table = siimage_pci_tbl,
.probe = siimage_init_one,
};
static int siimage_ide_init(void)
{
return ide_pci_register_driver(&driver);
}
module_init(siimage_ide_init);
MODULE_AUTHOR("Andre Hedrick, Alan Cox");
MODULE_DESCRIPTION("PCI driver module for SiI IDE");
MODULE_LICENSE("GPL");
Reference in a new issue View git blame Copy permalink