android_kernel_samsung_msm8976/sound/soc/pxa/poodle.c
Mark Brown e77125105b ASoC: Support non-crystal master clocks for WM8731
Instead of unconditionally enabling the crystal oscillator on the WM8731
only enable it when explicitly selected via set_sysclk(), allowing machine
drivers to specify that they drive a clock into MCLK alone. This avoids
any conflicts between the oscillator and the external MCLK source and saves
power for systems which do not need the oscillator.

This should also deliver a small power saving on systems using the crystal
since the oscillator will only be enabled when the ADC or DAC is active.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-08-18 16:52:56 +01:00

326 lines
8.3 KiB
C

/*
* poodle.c -- SoC audio for Poodle
*
* Copyright 2005 Wolfson Microelectronics PLC.
* Copyright 2005 Openedhand Ltd.
*
* Authors: Liam Girdwood <lrg@slimlogic.co.uk>
* Richard Purdie <richard@openedhand.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
*/
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/timer.h>
#include <linux/i2c.h>
#include <linux/interrupt.h>
#include <linux/platform_device.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/soc.h>
#include <sound/soc-dapm.h>
#include <asm/mach-types.h>
#include <asm/hardware/locomo.h>
#include <mach/poodle.h>
#include <mach/audio.h>
#include "../codecs/wm8731.h"
#include "pxa2xx-i2s.h"
#define POODLE_HP 1
#define POODLE_HP_OFF 0
#define POODLE_SPK_ON 1
#define POODLE_SPK_OFF 0
/* audio clock in Hz - rounded from 12.235MHz */
#define POODLE_AUDIO_CLOCK 12288000
static int poodle_jack_func;
static int poodle_spk_func;
static void poodle_ext_control(struct snd_soc_codec *codec)
{
/* set up jack connection */
if (poodle_jack_func == POODLE_HP) {
/* set = unmute headphone */
locomo_gpio_write(&poodle_locomo_device.dev,
POODLE_LOCOMO_GPIO_MUTE_L, 1);
locomo_gpio_write(&poodle_locomo_device.dev,
POODLE_LOCOMO_GPIO_MUTE_R, 1);
snd_soc_dapm_enable_pin(codec, "Headphone Jack");
} else {
locomo_gpio_write(&poodle_locomo_device.dev,
POODLE_LOCOMO_GPIO_MUTE_L, 0);
locomo_gpio_write(&poodle_locomo_device.dev,
POODLE_LOCOMO_GPIO_MUTE_R, 0);
snd_soc_dapm_disable_pin(codec, "Headphone Jack");
}
/* set the enpoints to their new connetion states */
if (poodle_spk_func == POODLE_SPK_ON)
snd_soc_dapm_enable_pin(codec, "Ext Spk");
else
snd_soc_dapm_disable_pin(codec, "Ext Spk");
/* signal a DAPM event */
snd_soc_dapm_sync(codec);
}
static int poodle_startup(struct snd_pcm_substream *substream)
{
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct snd_soc_codec *codec = rtd->codec;
/* check the jack status at stream startup */
poodle_ext_control(codec);
return 0;
}
/* we need to unmute the HP at shutdown as the mute burns power on poodle */
static void poodle_shutdown(struct snd_pcm_substream *substream)
{
/* set = unmute headphone */
locomo_gpio_write(&poodle_locomo_device.dev,
POODLE_LOCOMO_GPIO_MUTE_L, 1);
locomo_gpio_write(&poodle_locomo_device.dev,
POODLE_LOCOMO_GPIO_MUTE_R, 1);
}
static int poodle_hw_params(struct snd_pcm_substream *substream,
struct snd_pcm_hw_params *params)
{
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct snd_soc_dai *codec_dai = rtd->codec_dai;
struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
unsigned int clk = 0;
int ret = 0;
switch (params_rate(params)) {
case 8000:
case 16000:
case 48000:
case 96000:
clk = 12288000;
break;
case 11025:
case 22050:
case 44100:
clk = 11289600;
break;
}
/* set codec DAI configuration */
ret = snd_soc_dai_set_fmt(codec_dai, SND_SOC_DAIFMT_I2S |
SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBS_CFS);
if (ret < 0)
return ret;
/* set cpu DAI configuration */
ret = snd_soc_dai_set_fmt(cpu_dai, SND_SOC_DAIFMT_I2S |
SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBS_CFS);
if (ret < 0)
return ret;
/* set the codec system clock for DAC and ADC */
ret = snd_soc_dai_set_sysclk(codec_dai, WM8731_SYSCLK_XTAL, clk,
SND_SOC_CLOCK_IN);
if (ret < 0)
return ret;
/* set the I2S system clock as input (unused) */
ret = snd_soc_dai_set_sysclk(cpu_dai, PXA2XX_I2S_SYSCLK, 0,
SND_SOC_CLOCK_IN);
if (ret < 0)
return ret;
return 0;
}
static struct snd_soc_ops poodle_ops = {
.startup = poodle_startup,
.hw_params = poodle_hw_params,
.shutdown = poodle_shutdown,
};
static int poodle_get_jack(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
{
ucontrol->value.integer.value[0] = poodle_jack_func;
return 0;
}
static int poodle_set_jack(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
{
struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
if (poodle_jack_func == ucontrol->value.integer.value[0])
return 0;
poodle_jack_func = ucontrol->value.integer.value[0];
poodle_ext_control(codec);
return 1;
}
static int poodle_get_spk(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
{
ucontrol->value.integer.value[0] = poodle_spk_func;
return 0;
}
static int poodle_set_spk(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
{
struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
if (poodle_spk_func == ucontrol->value.integer.value[0])
return 0;
poodle_spk_func = ucontrol->value.integer.value[0];
poodle_ext_control(codec);
return 1;
}
static int poodle_amp_event(struct snd_soc_dapm_widget *w,
struct snd_kcontrol *k, int event)
{
if (SND_SOC_DAPM_EVENT_ON(event))
locomo_gpio_write(&poodle_locomo_device.dev,
POODLE_LOCOMO_GPIO_AMP_ON, 0);
else
locomo_gpio_write(&poodle_locomo_device.dev,
POODLE_LOCOMO_GPIO_AMP_ON, 1);
return 0;
}
/* poodle machine dapm widgets */
static const struct snd_soc_dapm_widget wm8731_dapm_widgets[] = {
SND_SOC_DAPM_HP("Headphone Jack", NULL),
SND_SOC_DAPM_SPK("Ext Spk", poodle_amp_event),
};
/* Corgi machine connections to the codec pins */
static const struct snd_soc_dapm_route audio_map[] = {
/* headphone connected to LHPOUT1, RHPOUT1 */
{"Headphone Jack", NULL, "LHPOUT"},
{"Headphone Jack", NULL, "RHPOUT"},
/* speaker connected to LOUT, ROUT */
{"Ext Spk", NULL, "ROUT"},
{"Ext Spk", NULL, "LOUT"},
};
static const char *jack_function[] = {"Off", "Headphone"};
static const char *spk_function[] = {"Off", "On"};
static const struct soc_enum poodle_enum[] = {
SOC_ENUM_SINGLE_EXT(2, jack_function),
SOC_ENUM_SINGLE_EXT(2, spk_function),
};
static const struct snd_kcontrol_new wm8731_poodle_controls[] = {
SOC_ENUM_EXT("Jack Function", poodle_enum[0], poodle_get_jack,
poodle_set_jack),
SOC_ENUM_EXT("Speaker Function", poodle_enum[1], poodle_get_spk,
poodle_set_spk),
};
/*
* Logic for a wm8731 as connected on a Sharp SL-C7x0 Device
*/
static int poodle_wm8731_init(struct snd_soc_pcm_runtime *rtd)
{
struct snd_soc_codec *codec = rtd->codec;
int err;
snd_soc_dapm_nc_pin(codec, "LLINEIN");
snd_soc_dapm_nc_pin(codec, "RLINEIN");
snd_soc_dapm_enable_pin(codec, "MICIN");
/* Add poodle specific controls */
err = snd_soc_add_controls(codec, wm8731_poodle_controls,
ARRAY_SIZE(wm8731_poodle_controls));
if (err < 0)
return err;
/* Add poodle specific widgets */
snd_soc_dapm_new_controls(codec, wm8731_dapm_widgets,
ARRAY_SIZE(wm8731_dapm_widgets));
/* Set up poodle specific audio path audio_map */
snd_soc_dapm_add_routes(codec, audio_map, ARRAY_SIZE(audio_map));
snd_soc_dapm_sync(codec);
return 0;
}
/* poodle digital audio interface glue - connects codec <--> CPU */
static struct snd_soc_dai_link poodle_dai = {
.name = "WM8731",
.stream_name = "WM8731",
.cpu_dai_name = "pxa-i2s",
.codec_dai_name = "wm8731-hifi",
.platform_name = "pxa-pcm-audio",
.codec_name = "wm8731-codec.0-001a",
.init = poodle_wm8731_init,
.ops = &poodle_ops,
};
/* poodle audio machine driver */
static struct snd_soc_card snd_soc_poodle = {
.name = "Poodle",
.dai_link = &poodle_dai,
.num_links = 1,
.owner = THIS_MODULE,
};
static struct platform_device *poodle_snd_device;
static int __init poodle_init(void)
{
int ret;
if (!machine_is_poodle())
return -ENODEV;
locomo_gpio_set_dir(&poodle_locomo_device.dev,
POODLE_LOCOMO_GPIO_AMP_ON, 0);
/* should we mute HP at startup - burning power ?*/
locomo_gpio_set_dir(&poodle_locomo_device.dev,
POODLE_LOCOMO_GPIO_MUTE_L, 0);
locomo_gpio_set_dir(&poodle_locomo_device.dev,
POODLE_LOCOMO_GPIO_MUTE_R, 0);
poodle_snd_device = platform_device_alloc("soc-audio", -1);
if (!poodle_snd_device)
return -ENOMEM;
platform_set_drvdata(poodle_snd_device, &snd_soc_poodle);
ret = platform_device_add(poodle_snd_device);
if (ret)
platform_device_put(poodle_snd_device);
return ret;
}
static void __exit poodle_exit(void)
{
platform_device_unregister(poodle_snd_device);
}
module_init(poodle_init);
module_exit(poodle_exit);
/* Module information */
MODULE_AUTHOR("Richard Purdie");
MODULE_DESCRIPTION("ALSA SoC Poodle");
MODULE_LICENSE("GPL");