android_kernel_samsung_msm8976/drivers/net/Space.c
Paul Gortmaker 463d413cb7 drivers/net: delete old x86 variant of the seeq8005 driver
The last update to the Ethernet HowTo (over 10 years ago) listed this:

 ------------------------
   SEEQ 8005

   Status: Obsolete, Driver Name: seeq8005

   There is little information about the card included in the driver,
   and hence little information to be put here. If you have a question,
   you are probably best trying to e-mail the driver author as listed
   in the source.

   It was marked obsolete as of the 2.4 series kernels.
 ------------------------

If it was obsolete over a decade ago, the situation can not have
improved with the passage of time, so let us act on that.  Even with
today's improved search engines, I was unable to locate any real
meaningful information on the ISA implementation of this rare chip.

There are ARM and SGI variants of the driver in tree, but they do
not depend on the original x86 driver source or header file.  We
leave those non-x86 drivers to be deleted by the arch maintainers
when they decide to expire those legacy platforms as a whole.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2013-01-22 10:39:56 -05:00

194 lines
5.3 KiB
C

/*
* INET An implementation of the TCP/IP protocol suite for the LINUX
* operating system. INET is implemented using the BSD Socket
* interface as the means of communication with the user level.
*
* Holds initial configuration information for devices.
*
* Version: @(#)Space.c 1.0.7 08/12/93
*
* Authors: Ross Biro
* Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG>
* Donald J. Becker, <becker@scyld.com>
*
* Changelog:
* Stephen Hemminger (09/2003)
* - get rid of pre-linked dev list, dynamic device allocation
* Paul Gortmaker (03/2002)
* - struct init cleanup, enable multiple ISA autoprobes.
* Arnaldo Carvalho de Melo <acme@conectiva.com.br> - 09/1999
* - fix sbni: s/device/net_device/
* Paul Gortmaker (06/98):
* - sort probes in a sane way, make sure all (safe) probes
* get run once & failed autoprobes don't autoprobe again.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
#include <linux/errno.h>
#include <linux/init.h>
#include <linux/netlink.h>
/* A unified ethernet device probe. This is the easiest way to have every
ethernet adaptor have the name "eth[0123...]".
*/
extern struct net_device *hp100_probe(int unit);
extern struct net_device *ultra_probe(int unit);
extern struct net_device *wd_probe(int unit);
extern struct net_device *ne_probe(int unit);
extern struct net_device *fmv18x_probe(int unit);
extern struct net_device *i82596_probe(int unit);
extern struct net_device *ni65_probe(int unit);
extern struct net_device *sonic_probe(int unit);
extern struct net_device *smc_init(int unit);
extern struct net_device *atarilance_probe(int unit);
extern struct net_device *sun3lance_probe(int unit);
extern struct net_device *sun3_82586_probe(int unit);
extern struct net_device *apne_probe(int unit);
extern struct net_device *cs89x0_probe(int unit);
extern struct net_device *mvme147lance_probe(int unit);
extern struct net_device *tc515_probe(int unit);
extern struct net_device *lance_probe(int unit);
extern struct net_device *mac8390_probe(int unit);
extern struct net_device *mac89x0_probe(int unit);
extern struct net_device *cops_probe(int unit);
extern struct net_device *ltpc_probe(void);
/* Fibre Channel adapters */
extern int iph5526_probe(struct net_device *dev);
/* SBNI adapters */
extern int sbni_probe(int unit);
struct devprobe2 {
struct net_device *(*probe)(int unit);
int status; /* non-zero if autoprobe has failed */
};
static int __init probe_list2(int unit, struct devprobe2 *p, int autoprobe)
{
struct net_device *dev;
for (; p->probe; p++) {
if (autoprobe && p->status)
continue;
dev = p->probe(unit);
if (!IS_ERR(dev))
return 0;
if (autoprobe)
p->status = PTR_ERR(dev);
}
return -ENODEV;
}
/*
* ISA probes that touch addresses < 0x400 (including those that also
* look for EISA/PCI cards in addition to ISA cards).
*/
static struct devprobe2 isa_probes[] __initdata = {
#if defined(CONFIG_HP100) && defined(CONFIG_ISA) /* ISA, EISA */
{hp100_probe, 0},
#endif
#ifdef CONFIG_3C515
{tc515_probe, 0},
#endif
#ifdef CONFIG_ULTRA
{ultra_probe, 0},
#endif
#ifdef CONFIG_WD80x3
{wd_probe, 0},
#endif
#if defined(CONFIG_NE2000) || \
defined(CONFIG_NE_H8300) /* ISA (use ne2k-pci for PCI cards) */
{ne_probe, 0},
#endif
#ifdef CONFIG_LANCE /* ISA/VLB (use pcnet32 for PCI cards) */
{lance_probe, 0},
#endif
#ifdef CONFIG_SMC9194
{smc_init, 0},
#endif
#ifdef CONFIG_CS89x0
#ifndef CONFIG_CS89x0_PLATFORM
{cs89x0_probe, 0},
#endif
#endif
#if defined(CONFIG_MVME16x_NET) || defined(CONFIG_BVME6000_NET) /* Intel I82596 */
{i82596_probe, 0},
#endif
#ifdef CONFIG_NI65
{ni65_probe, 0},
#endif
{NULL, 0},
};
static struct devprobe2 m68k_probes[] __initdata = {
#ifdef CONFIG_ATARILANCE /* Lance-based Atari ethernet boards */
{atarilance_probe, 0},
#endif
#ifdef CONFIG_SUN3LANCE /* sun3 onboard Lance chip */
{sun3lance_probe, 0},
#endif
#ifdef CONFIG_SUN3_82586 /* sun3 onboard Intel 82586 chip */
{sun3_82586_probe, 0},
#endif
#ifdef CONFIG_APNE /* A1200 PCMCIA NE2000 */
{apne_probe, 0},
#endif
#ifdef CONFIG_MVME147_NET /* MVME147 internal Ethernet */
{mvme147lance_probe, 0},
#endif
#ifdef CONFIG_MAC8390 /* NuBus NS8390-based cards */
{mac8390_probe, 0},
#endif
#ifdef CONFIG_MAC89x0
{mac89x0_probe, 0},
#endif
{NULL, 0},
};
/*
* Unified ethernet device probe, segmented per architecture and
* per bus interface. This drives the legacy devices only for now.
*/
static void __init ethif_probe2(int unit)
{
unsigned long base_addr = netdev_boot_base("eth", unit);
if (base_addr == 1)
return;
(void)( probe_list2(unit, m68k_probes, base_addr == 0) &&
probe_list2(unit, isa_probes, base_addr == 0));
}
/* Statically configured drivers -- order matters here. */
static int __init net_olddevs_init(void)
{
int num;
#ifdef CONFIG_SBNI
for (num = 0; num < 8; ++num)
sbni_probe(num);
#endif
for (num = 0; num < 8; ++num)
ethif_probe2(num);
#ifdef CONFIG_COPS
cops_probe(0);
cops_probe(1);
cops_probe(2);
#endif
#ifdef CONFIG_LTPC
ltpc_probe();
#endif
return 0;
}
device_initcall(net_olddevs_init);