FB_ACTIVATE_VBL bit is set to enable TE logic at pan_display
and unset to disable TE logic at pan_display for smart panel.
This patch checks for FB_ACTIVATE_VBL bit set only instead of
value.
CRs-fixed: 433399
Change-Id: I6fc913c6752fcca6a27c783c45ab318065217973
Signed-off-by: Kuogee Hsieh <khsieh@codeaurora.org>
For cmd mode the frame rate calculation result is wrong. Also in mdp
driver there are several places to do the same calculation. So fix the
wrong calculation and use a single func to do calculation.
Conflicts:
drivers/video/msm/msm_fb.c
Change-Id: I3a4be39e480ce82677dcefb666202947f7f6d3c1
Signed-off-by: Huaibin Yang <huaibiny@codeaurora.org>
(cherry picked from commit d4eb5a1a3ef0935ce6aeffb2b48974c01b9518b9)
Signed-off-by: Neha Pandey <nehap@codeaurora.org>
mdp bus client could be registered multiple times without the check.
Change-Id: I582741c75e815873357e62bc9bf0ff61a4cecf9f
Signed-off-by: Huaibin Yang <huaibiny@codeaurora.org>
This change adds free buffer api to video
client's flushing state to allow buffer
freeing in flush state.
CRs-fixed: 430214
Change-Id: I970efbbd8cc503eab4b944e12630f1b1faa9069c
Signed-off-by: Maheshwar Ajja <majja@codeaurora.org>
Memory allocated for "buf_entry" and "sched_cctxt"
is not freed in case if error is returned. This
change prevents possible memory leak in video
decoder driver.
CRs-fixed: 432323
Change-Id: I1c8775fb701f1568f704b6ddbb4e835304d2a817
Signed-off-by: Shobhit Pandey <cshopan@codeaurora.org>
This patch allow satge commit without pipes queued to
allow a pipe to be un-staged from mixer immediately after
overlay_unset.
Change-Id: I03abb907c66cce3d0559743d3bb1eb26a88dc78a
Signed-off-by: Kuogee Hsieh <khsieh@codeaurora.org>
Signed-off-by: Siddhartha Agrawal <agrawals@codeaurora.org>
Moving RGB1 and RGB2 to AXI port 1. This fixes underrun issues seen
on External display while connecting and disconnecting HDMI. This patch
evenly balancing pipe loads on each port.
Change-Id: I2dc1166d04bb938f9e233a6de52f1a8a3fdd29e2
CRs-Fixed: 435458
Signed-off-by: Siddhartha Agrawal <agrawals@codeaurora.org>
mdp_clk_ctrl on is not called when commit is from overlay commit path
which can cause mdp hang. mdp_clk_ctrl off should be after mdp
overlay2 is done, so schedule a work in overlay2 done isr.
Change-Id: I94fd08da27cfda114f5cc0056a5103f0a9b772f6
Signed-off-by: Huaibin Yang <huaibiny@codeaurora.org>
FIR and M/N scalar when used for downscaling, drops
alpha channel of the given layer. To notify this, alpha_drop flag
is updated accordingly. This flag need not be checked for layers
with no alpha plane. In some scenarios alpha_drop may get enabled
for the layers with no alpha plane and cause issues realted to blend
composition of layers. Check for setting alpha_drop only if source
ayer has alpha plane.
Change-Id: Ie64b30c045a78d0d68eb9efacc76902afae7850d
Signed-off-by: Mayank Chopra <makchopra@codeaurora.org>
Retain RGB1 iommu information during base layer swap
so that iommu used by RGB1 can be freed back to pool later.
Change-Id: Ibed85179284743dc8a9d1434f0c81626b0567e16
Signed-off-by: Kuogee Hsieh <khsieh@codeaurora.org>
(cherry picked from commit be46f9f596c5172438a74759d48ca7db600cd737)
Remove unused fence input in mdp_display_commit
structure
Use different timeline name for different fb
Change-Id: I4edd335b36dce057ff3e54302af6088a9cc470ec
Signed-off-by: Ken Zhang <kenz@codeaurora.org>
We should reset the data corrupt flag only for codecs
other than H264 and MPEG-2 in line with the video firmware
support. Hence, modify the conditional check.
Change-Id: I7c4d5557a3f9b1d1762fe7cfcd5693a6760188f0
Signed-off-by: Rajeshwar Kurapaty <rkurapat@codeaurora.org>
(cherry picked from commit c165675bf03feb182bfd46d2ac5ceebcf4987f74)
Signed-off-by: Manish Kumar <manishku@codeaurora.org>
ISDB-T client requires flags indicating the correctness
of output YUV data from MPEG-2 decoder. With this commit,
DATA_CORRUPT flag is sent from the driver if the output
YUV is either INCORRECT or APPROX_CORRECT.
Change-Id: I72e8ba81f45200715a195497d4eae140cbe86616
Signed-off-by: Rajeshwar Kurapaty <rkurapat@codeaurora.org>
(cherry picked from commit d68ca84da4a5c68eb2caf1f9e4dbb665bba5a05c)
Conflicts:
drivers/video/msm/vidc/1080p/ddl/vcd_ddl_interrupt_handler.c
Signed-off-by: Sudhir Sharma <sudsha@codeaurora.org>
Signed-off-by: Manish Kumar <manishku@codeaurora.org>
MPEG-2 display aspect ratio calculation was done similar
to MPEG-4 standard. Correct it as per the MPEG-2 standard
and video core interface specification.
Change-Id: I1aa98ca238c7b38e35c78905b29457cfa59edd45
Signed-off-by: Shobhit Pandey <cshopan@codeaurora.org>
(cherry picked from commit ce5f973881c11491c3fa35ceb8c945a6c8ee2b8f)
Signed-off-by: Manish Kumar <manishku@codeaurora.org>
The JB MR1 update was not recognizing the LVDS panel and hence
throwing an invalid panel error. Adding check for LVDS panel to
enable display on 8064 CDP.
Change-Id: Ib125cc797b288ca027f91778d9892acfa00a3214
Signed-off-by: Siddhartha Agrawal <agrawals@codeaurora.org>
There are two pathes (pan display and overlay commit) to commit
display buffer, so change the location of cpu timer wakup call to the
common pipe_commit function to make sure cpu get waked up around
vsync.
Signed-off-by: Huaibin Yang <huaibiny@codeaurora.org>
Change-Id: Idbe6049d740a7e17a6a90e28566f7a9c74e348f2
Add this feature for cmd mode panel. The feature is to avoid frame
drops due to power collapse and it is already present for other
display interfaces.
Change-Id: Ic68f41cd59931294b592577475ed7480459f2cf8
Signed-off-by: Huaibin Yang <huaibiny@codeaurora.org>
To avoid frame drops due to power collapse,
wake up cpu right before vsync.
Conflicts:
drivers/video/msm/mdp.c
drivers/video/msm/msm_fb.h
Change-Id: I63385eb329ae5e74cbac5256823fd3a213e0a0e1
Signed-off-by: Ken Zhang <kenz@codeaurora.org>
Signed-off-by: Huaibin Yang <huaibiny@codeaurora.org>
- Due to race condition between free buffer and flush output buffers,
invalid buffer is getting accessed sometimes.
- Reset all the members in buffer entry except list elements.
(cherry picked from commit 8105df366cf6b9f1ddbc15d561fb6a5f12540416)
CRs-Fixed: 411197
Change-Id: Id95037f57d7fe4bc88b96f187953194ec838d63b
Signed-off-by: Srinu Gorle <sgorle@codeaurora.org>
Signed-off-by: Neha Pandey <nehap@codeaurora.org>
Update the profile info in the sequence header with the
info which the core returns in the shared memory register.
(cherry picked from commit 5a60819aeb698b9d27937329bb5559a7a787a06e)
CRs-fixed: 408349
Change-Id: I6db75c907260c9744ec4e0d88db776be9bca8dea
Signed-off-by: Shobhit Pandey <cshopan@codeaurora.org>
Signed-off-by: Neha Pandey <nehap@codeaurora.org>
Currently mdp bandwidth request logic is based on source image size
and number of layers. This logic can not support complicated mdp
usecases and it is not power efficient. The logic is improved by
calculating mdp bandwidth request at runtime from all pipes and mixers.
Conflicts:
drivers/video/msm/mdp.c
drivers/video/msm/mdp4_overlay.c
drivers/video/msm/mipi_dsi.c
CRs-fixed: 425823
Change-Id: I63206f00f8d3017a2449f8ac617fce3ba2a4d36c
Signed-off-by: Huaibin Yang <huaibiny@codeaurora.org>
Borderfill pipe need to be kept as baselayer which is not
suppose to be freed at suspend. It only be freed when
ref_cnt reach 0 by "adb stop".
CRs-fixed: 429196
Change-Id: Ibffe7960cc194162d1ba71e8dc8636393938483f
Signed-off-by: Kuogee Hsieh <khsieh@codeaurora.org>
Some panels need to be initialized after panel is on.
Add late_init to support this feature.
CRs-fixed: 433011
Change-Id: I73c623d1fe52363f070af79ce4bf7774cd84689e
Signed-off-by: Kuogee Hsieh <khsieh@codeaurora.org>
Both mdp and mdp_vsync clks are disabled for command mode panel when
no new frames are being played. When they are re-enabled if new
requests come in, the first vsync event which is signaled by read
pointer interrupt arrives in a random time due to the sync between mdp
and panel, so skip it to maintain correct vsync timing.
Change-Id: I683b765e4a16d3d152b9270f5982234b94921f1e
Signed-off-by: Huaibin Yang <huaibiny@codeaurora.org>
(cherry picked from commit a4567ac320abe5d74b3c7decdbddba4bd8c57463)
In resume, previous cached request data needs be cleared as
they do not reflect the current hw status.
Signed-off-by: Ken Zhang <kenz@codeaurora.org>
Conflicts:
drivers/video/msm/mdp4_overlay.c
Change-Id: I6e3abe09a38b4499ceb168ea7b0351672253a6cd
Signed-off-by: Ramakrishna Prasad N <crpn@codeaurora.org>
Buffer flags are going to be specified at allocation time rather than
map time. This removes the flags argument from the ion kernel map
function.
Change-Id: Ib983ecd0dcd7befb36287ae7037c71d4ca475f90
Signed-off-by: Mitchel Humpherys <mitchelh@codeaurora.org>
The symbols CACHED and UNCACHED have been replaced by ION_FLAG_CACHED
upstream. This removes them from the kernel.
Change-Id: I90c33c293f56792131fc6bd490fe041b5798ac20
Signed-off-by: Mitchel Humpherys <mitchelh@codeaurora.org>
Changes to pass ION_SECURE in the correct argument field
while calling ion_alloc. Without this change secure session
fails.
Change-Id: Ifa4878b1c312beafc735cb649570913159799d7c
Signed-off-by: Srinu Gorle <sgorle@codeaurora.org>
Signed-off-by: Mitchel Humpherys <mitchelh@codeaurora.org>
Heap mask field passes as argument at allocation time to specify ion
heap.
Change-Id: I6951da81b11bfcb0e006d2539c1707aabbb12db6
Signed-off-by: Hanumant Singh <hanumant@codeaurora.org>
Signed-off-by: Mitchel Humpherys <mitchelh@codeaurora.org>
All msm_ion clients need to use <linux/msm_ion.h> instead of
<linux/ion.h>
Change-Id: I7b5390d7cb9cb5b03227b77def248c48b7bc7fa2
Signed-off-by: Mitchel Humpherys <mitchelh@codeaurora.org>
Timing generator will not be turned on if there are no pipes queued.
Therefore wait_for_completion may never be completed if there have
no pipes queued.
Change-Id: Iafba086e4ba20b31470c9fd385c4f5c474ecadcf
Signed-off-by: Kuogee Hsieh <khsieh@codeaurora.org>
Signed-off-by: Mayank Goyal <goyalm@codeaurora.org>
Both mdp_isr() and mdp_histogram_disable() uses the same
spin lock mdp_spin_lock variable. One core waits for disabling
mdp_isr after acquiring mdp_spin_lock and other core in mdp_isr()
waits for spin lock mdp_spin_lock and dead lock between two cores.
Change-Id: I73a10494ab78e92fc88a348aed4f526091b51f89
Signed-off-by: Prasad Sodagudi <psodagud@codeaurora.org>
Signed-off-by: Pravin Tamkhane <pravint@codeaurora.org>
Remove the modification of mdp_rev during mdp_probe. Not needed since
board files now have the correct MDP revision data.
CRs-Fixed: 417080
Change-Id: I553cb2a8e8de43b6c7b7976c3eca67d00a3cfe4f
Signed-off-by: Carl Vanderlip <carlv@codeaurora.org>
Conflicts:
drivers/video/msm/mdp.c
Signed-off-by: Pravin Tamkhane <pravint@codeaurora.org>
Send the ETIMEDOUT errno when the update-notify wait_for_completion times
out. This is required to be able to properly handle the different failure
cases in the functions that use the update notify ioctl.
Change-Id: I0e46b0b0c89f6b2e5beb3fc0ed18ebbb75dfa434
Signed-off-by: Carl Vanderlip <carlv@codeaurora.org>
Signed-off-by: Pravin Tamkhane <pravint@codeaurora.org>
Content Adaptive BackLight userspace algo waits on UPDATE_NOTIFY to
get the screen updates. When turning off CABL, this blocking ioctl
causes the CABL threads to wait until next screen update, which may
take indefinite time.
Add timeout value to the wait_for_completion call, to make ioctl
call blocking for at most timeout value.
CRs-Fixed: 384026
Change-Id: I6715a36020c24ddd09823bd54d4321900429a6b9
Signed-off-by: Kinjal Bhavsar <kbhavsar@codeaurora.org>
Signed-off-by: Pravin Tamkhane <pravint@codeaurora.org>
1) Initialise the LM1 and LM2 coefficients with RGB2YUV as WFD expects
these coefficients to be programmed.
2) LM2 is available from MDP ver 4.3, fix conditions accordingly
CRs-Fixed: 399462
Change-Id: Ifad2be0fb5c3c96fa1515e114097a87d250fd62a
Signed-off-by: Kalyan Thota <kalyant@codeaurora.org>
(cherry picked from commit f6044334ee63fe9553f5cce8aa65c172c88e1175)
Signed-off-by: Dhivya Subramanian <dthiru@codeaurora.org>
Conflicts:
drivers/video/msm/mdp.c
Signed-off-by: Pravin Tamkhane <pravint@codeaurora.org>
CSC values pertaining to various H/W blocks are stored in a
global structure and will be re-applied during resume sequence.
CRs-Fixed: 376159
Change-Id: Ieb151185efd106041e28feedf4fa271ae4ba2666
Signed-off-by: Kalyan Thota <kalyant@codeaurora.org>
Signed-off-by: Pravin Tamkhane <pravint@codeaurora.org>
Enable the mdp clock for histogram and histogram LUT to ensure that the
clock remains enabled when they are being accessed.
Change-Id: Ic744f2ee96b64442f23ba19aa1c38552c0dad83a
Signed-off-by: Carl Vanderlip <carlv@codeaurora.org>
Signed-off-by: Pravin Tamkhane <pravint@codeaurora.org>
Disable interrupt, set state flags to false, cancel histogram collection,
and clear the workqueue before attempting to enable the histogram. This
guarantees that this is the only configuration of the histogram running.
Change-Id: I222932db40494724b3efdb2e5bea08a849095c1e
Signed-off-by: Carl Vanderlip <carlv@codeaurora.org>
(cherry picked from commit 5e5f3b4ff8a4a0d980e02fa38c2b70fec7095e79)
Signed-off-by: Dhivya Subramanian <dthiru@codeaurora.org>
Signed-off-by: Pravin Tamkhane <pravint@codeaurora.org>
Currently, when an underrun occurs, a reset request is sent to the
histogram hardware. This has been observed to cause a hang in the histogram
collection cycle. The fix for this hang is to instead rely on the existing
checks for histogram validity in the histgram read worker. When the
underrun occurs, the histogram is invalidated, which in turn causes the
histogram read worker to reset the histogram collection when it attempts to
read its contents.
Change-Id: I66d33ddedef76fdcb6c4a3d8095c0e8ca695e33d
Signed-off-by: Carl Vanderlip <carlv@codeaurora.org>
(cherry picked from commit 2dd5234c094157bf77781b8646ac9ad114f819b0)
Signed-off-by: Pravin Tamkhane <pravint@codeaurora.org>
Make histogram enable/disable functions also enable/disable the histogram
"interrupt enabled" bit on the MDP enabled interrupts register.
CRs-Fixed: 398556
Signed-off-by: Carl Vanderlip <carlv@codeaurora.org>
Change-Id: I56f811e88cf3fd44ae0a2df8a6e5de32ba9a0c1c
(cherry picked from commit 1026832c51cbadeea9a717fa20fb42b6a7c5661f)
Signed-off-by: Pravin Tamkhane <pravint@codeaurora.org>
Histogram expects the display to be on while running, thus moving its
disable call to before disabling the panel timing generator ensures this
assertion.
Change-Id: I308b3e0c24f0111fb8549d0a0ae025910d649b75
Signed-off-by: Carl Vanderlip <carlv@codeaurora.org>
Conflicts:
drivers/video/msm/mdp4_overlay_dsi_video.c
drivers/video/msm/mdp4_overlay_lcdc.c
Signed-off-by: Pravin Tamkhane <pravint@codeaurora.org>
Poor video quality is observed as VUI fps information is not present in
the encoded bit stream. Add support for VUI timing info in video driver
and an additional V4L2 control to set from user space.
CRs-Fixed: 399017
Signed-off-by: Srinu Gorle <sgorle@codeaurora.org>
Conflicts:
include/linux/videodev2.h
Change-Id: I970d4c479009da2d08531a9e9b8489a84cc5d44c
Signed-off-by: Neha Pandey <nehap@codeaurora.org>
Add new V4L2 control to set AU delimiter for AVC.
Change-Id: I8c72cb89f18c9b2b550b906d797eafb73ac4ebbe
CRs-Fixed: 389030
Signed-off-by: Srinu Gorle <sgorle@codeaurora.org>
Signed-off-by: Neha Pandey <nehap@codeaurora.org>
Display commit will work as overlay commit when
MDP_DISPLAY_COMMIT_OVERLAY flag is set. It will be
non-blocking if wait_for_finish is false.
Signed-off-by: Ken Zhang <kenz@codeaurora.org>
Signed-off-by: Naseer Ahmed <naseer@codeaurora.org>
Change-Id: Ibd143dbfcd2fdd7a8fab3038c5af4e2fbc9ea198
Frame buffer maintains a reference count (f_count) which increased
by fget() and decreased by fput(). overlay play will apply
fget() to frame buffer if it was the soruce buffer and fput()
will be applied to it after pipe commit done. However there has
extra fput() apply to frame buffer at the time pipe is freed.
This patch fix the problem by clear MDP_MEMORY_ID_TYPE_FB from
pipe's flags to avoid extra fput() applying to frame buffer.
CRs-fixed: 411394
Change-Id: Ib2b72e6277480b5ace23cda554be485d9d477b3d
Signed-off-by: Kuogee Hsieh <khsieh@codeaurora.org>
Signed-off-by: Siddhartha Agrawal <agrawals@codeaurora.org>
cmdlist_commit perform dsi clock control which turns off
dsi clock unexpectly when dsi controller is configured as
command mode during booting up. This cause display panel
can not be lit up. This patch drop clock control mechanism
from cmdlist_commit and move dsi clock control mechanism to
caller.
Change-Id: I1882ea3ee1c90ac5d76958c986740582929a5e3b
Signed-off-by: Kuogee Hsieh <khsieh@codeaurora.org>
Signed-off-by: Siddhartha Agrawal <agrawals@codeaurora.org>
On timeout while waiting for the vsync, send the current
timestamp to the userspace. This resolves the infinite
wait seen during the bootup.
Change-Id: Ib1426c7c9a21c37758d7352740938627d4613fd6
Signed-off-by: Siddhartha Agrawal <agrawals@codeaurora.org>
vsync sysfs entries should be created in mdp_probe instead of
creating in panel on. This avoids waiting for the first event
control in framework
Change-Id: I18b05b8d2a65d489afc6e3274ec8dc7a5b9a5f9a
Signed-off-by: Mayank Chopra <makchopra@codeaurora.org>
Signed-off-by: Siddhartha Agrawal <agrawals@codeaurora.org>
vsync sysfs entries should be created in mdp_probe instead of
creating in panel on. This avoids waiting for the first event
control in framework
Change-Id: I983731481ea89bb7666be5f2a9f75a1e04fd963f
Signed-off-by: Mayank Chopra <makchopra@codeaurora.org>
Signed-off-by: Siddhartha Agrawal <agrawals@codeaurora.org>
Replace sending of vsync timestamp using uevents with sysfs entry
as uevent result in increase in power numbers due to broadcast in
nature.
Change-Id: I22cfbd68c8bcbe4a47e94074393f1cbf79920c58
Signed-off-by: Mayank Chopra <makchopra@codeaurora.org>
Signed-off-by: Siddhartha Agrawal <agrawals@codeaurora.org>
Conflicts:
drivers/video/msm/mdp_dma.c
Signed-off-by: Siddhartha Agrawal <agrawals@codeaurora.org>
Avoid eternal wait for vsync event when client tries to
read the corresponding sysfs entry. This will avoid hangs when
client tries to read in corner cases where the Timing
Generator or the clock or IRQ gets disabled.
CRs-fixed: 406752
Change-Id: I773687220b868823a9e4bfdae74361ee6487c5c6
Signed-off-by: Pradeep Jilagam <pjilagam@codeaurora.org>
Signed-off-by: Siddhartha Agrawal <agrawals@codeaurora.org>
Change to make the vsync IOCTL no wait during the disable sequence.
This is to increase the performance. Handle the synchronization of
vsync interrupt using state variables in drivers from now.
Change-Id: Ia5ec14493f233a95f21d01ea627200a6c278239f
Signed-off-by: Padmanabhan Komanduru <pkomandu@codeaurora.org>
Signed-off-by: Siddhartha Agrawal <agrawals@codeaurora.org>
Handle enabling/disabling the vsync interrupt and mdp clock
enabling/disabling in a better way on MDP 3.03 targets. This
will avoid target crashes due to unclocked register access.
CRs-fixed: 388751
Change-Id: I5c4a409772464ce7d06869374dcba5ad7e335955
Signed-off-by: Padmanabhan Komanduru <pkomandu@codeaurora.org>
Signed-off-by: Siddhartha Agrawal <agrawals@codeaurora.org>
When mdp commits a buffer to play, functions inside pan display, e.g.
mdp4_overlay_mdp_perf_upd are based on the current state of play, so
extending mutex to the scope of pan display to avoid race conditions.
Change-Id: I2e55567fd21de3738be066a2dee298d8122f12a3
Signed-off-by: Huaibin Yang <huaibiny@codeaurora.org>
Signed-off-by: Siddhartha Agrawal <agrawals@codeaurora.org>
Disable IRQ for DSI_CMD_TERM was already called in the isr.
Removing the extra call present in the cmds_rx API's.
Change-Id: I0000dd3166beb2a3b0c788327e1d7520e0c11a13
Signed-off-by: Siddhartha Agrawal <agrawals@codeaurora.org>
Add wait4videodone to commit dcs commands to dsi controller
while video engine is busy so that dcs commands will be
transmitted to panel at next beginning of BLLP.
Change-Id: I7ca40124813452f25a60f899437aeb9bce6feb14
Signed-off-by: Kuogee Hsieh <khsieh@codeaurora.org>
Signed-off-by: Siddhartha Agrawal <agrawals@codeaurora.org>
Pipe is not un-staged from mixer when it is unset.
It expects a pan_display() to un-stage it out of mixer.
Return fail at overlay_set() if pipe was still stage
at mixer.
CRs-fixed: 399193, 393979
Change-Id: I562f6e133bb239b30f4f53669dbf1cc5ddf80d02
Signed-off-by: Kuogee Hsieh <khsieh@codeaurora.org>
Signed-off-by: Siddhartha Agrawal <agrawals@codeaurora.org>
There has VG1 pipe commit (pan display) happen after system
suspended. This left VG1 still staged up at mdp mixer. Once timing
generator is enabled at resume, VG1 pipe start fetching contents from
address 0 since VG1 has not yet be configured. This cause page fault.
This patch has sanity check at system suspend to make sure no any pipe
stage up at mixer after suspend.
Change-Id: Idcf974ceb4afe2a3ec55b9603b700fa497f84045
Signed-off-by: Kuogee Hsieh <khsieh@codeaurora.org>
Signed-off-by: Siddhartha Agrawal <agrawals@codeaurora.org>
For the panels that have low v_back_porch, if h/w FIR scaling is used,
during vbp time, mdp clk should be fast enough to output a line from 4
input lines. MDP rate equation for very small scaling, e.g. 1 or 2
pixels' upscaling or downscaling cannot cover this case, where
underruns are seen on those panels.
Change-Id: I4f35f98c2c1bc4ef04dfee193427bd3ff674945d
Signed-off-by: Huaibin Yang <huaibiny@codeaurora.org>
Signed-off-by: Siddhartha Agrawal <agrawals@codeaurora.org>
MDP4.1 blend operation registers are not double buffered and
take effect as soon as they are configured. Configuring these
registers at any place other than between dma and vsync produce
flickers as new blend values would get applied to previous
mixer configurations. Configure blend operation registers just
after dma is over, before vsync.
Change-Id: I377c11222f7a0cd77e98e90edec6e2e1dc0c17ca
Signed-off-by: Pradeep Jilagam <pjilagam@codeaurora.org>
Signed-off-by: Siddhartha Agrawal <agrawals@codeaurora.org>
To make sure for each writeback play the reg is configured and avoid
mdp hang.
Change-Id: I29bdc31f27accca84e7add126c1c1e3c8a78fa15
Signed-off-by: Huaibin Yang <huaibiny@codeaurora.org>
Signed-off-by: Sudhir Sharma <sudsha@codeaurora.org>
(cherry picked from commit 36ca4e992dc5c75a2dd709969db850aa02e7c6e7)
Add the logic for wfd writeback interface. It already presents on
other display interfaces.
Change-Id: I389be77ec18041e260d0e71940586e86f1841ff8
Signed-off-by: Huaibin Yang <huaibiny@codeaurora.org>
Signed-off-by: Sudhir Sharma <sudsha@codeaurora.org>
(cherry picked from commit 3df55288659cfa826e9ad89cb38a8b722b2ae20f)
This change handles panel updates for WFD panel via
overlay_commit interface, along with conglomeration of
some common code across pan_update and overlay_commit ioctls
Signed-off-by: Kalyan Thota <kalyant@codeaurora.org>
Conflicts:
drivers/video/msm/mdp4_overlay.c
drivers/video/msm/msm_fb.c
include/linux/msm_mdp.h
Change-Id: I9e332856782c59ab598bb388a2ec482076746ad2
Signed-off-by: Sudhir Sharma <sudsha@codeaurora.org>
Overlay_play() adds a pipe into pending queue and pan_display()
will commit those pipes to hardware and empty queue. This patch
will make sure queue is empty at suspend so that no unexpected
pipes will be commited to hardware by pan_display() at resume.
Otherwise, iommu page fault may happen.
Change-Id: Iafdf469c6cdbf5d469c9dee114555a8d1adb9c66
Signed-off-by: Kuogee Hsieh <khsieh@codeaurora.org>
Conflicts:
drivers/video/msm/mdp4_overlay_dsi_cmd.c
Signed-off-by: Sudhir Sharma <sudsha@codeaurora.org>
To improve performance, hardware vsync event at mdp driver
is passed to framework so that both composition and frame
update are aligned at vsync event. This patch will upgrade
wfd to incorporate vsync driven frame push in consistence
with other interfaces.
Change-Id: If088826ec387446301f1f6acc311d909edb04163
Signed-off-by: Kuogee Hsieh <khsieh@codeaurora.org>
(cherry picked from commit d74db5fcf24a223570137087aa5632593b315fcc)
Conflicts:
drivers/video/msm/mdp4_overlay.c
drivers/video/msm/mdp4_overlay_writeback.c
Signed-off-by: Sudhir Sharma <sudsha@codeaurora.org>
With 8974, bandwidth requests are exceeding integer size.
Update ab and ib to ensure values over 4Gbps can be requested.
For 64-bit support, there are four changes in this patch:
Changes in the bus driver structures and functions to
update ab and ib values to uint64.
Updates in client drivers to ensure that the bus APIs
are called with the right types.
Updates to the device-tree. Device-tree nodes don't
provide a clean mechanism to read a combination of u32
and u64 variables within the same property name. So, the
ab and ib values must be specified in kbps instead of
bytes/sec from the device tree. The bus driver function
will convert the ab and ib values read from device-tree
to Mbps.
Change the existing property names to make them consistent
with the convention used by the new property name, which
abides to the Device Tree convention.
Change-Id: Ib0a6db0e221af366c61c51cc21ac722f02cb7a34
CRs-Fixed: 408786
Signed-off-by: Gagan Mac <gmac@codeaurora.org>
Signed-off-by: Rajeev Kulkarni <krajeev@codeaurora.org>
The mdp4 version reflects mdp's capability and is referred to at
many places. Currently, it is acquired by reading mdp version
register. Since the MDP version is defined in the board file,
this patch uses that version at probe time.
Change-Id: Iae2db1fb8609cb80f3705b5e47d3fefedc15fec5
Signed-off-by: Kuogee Hsieh <khsieh@codeaurora.org>
Signed-off-by: Naseer Ahmed <naseer@codeaurora.org>
Currently, alpha drop detection is done per frame which
means multiple blending stages share same alpha drop status
which does not reflect the alpha effect truly on each blending
stage. This patch enforces that the alpha drop detection
is done per blending stage so that alpha effect is applied
properly at each blending stage.
Change-Id: I2f456623c696192cf3388a635584a4a49d4720a0
Signed-off-by: Kuogee Hsieh <khsieh@codeaurora.org>
Signed-off-by: Naseer Ahmed <naseer@codeaurora.org>
When the blended background pipe has dropped alpha and it is going to
be blended with foreground pipe on the next stage,
MDP4_BLEND_BG_ALPHA_FG_CONST is taken. Foreground alpha constant is
0xFF, so we need to use this alpha value to show background, instead
of its inverted value.
Change-Id: I9412141b28a46ed3b58079a56969e79dea4ed57c
Signed-off-by: Huaibin Yang <huaibiny@codeaurora.org>
Signed-off-by: Naseer Ahmed <naseer@codeaurora.org>
Overlay commit and display commit were two separate
ioctls doing similar things. This change consolidates
the two into one display commit ioctl. With this, we
can use the RGB0 pipe with an IOMMU framebuffer.
Change-Id: I2b51e16a6678e6cec1bd3e56a00a476addb1296f
Signed-off-by: Kuogee Hsieh <khsieh@codeaurora.org>
Signed-off-by: Naseer Ahmed <naseer@codeaurora.org>
Since iommu buffers will be unmapped after two newer commits
had passed, there is no need to request iommu driver to further
delay unmapping an iommu buffer.
Change-Id: I8cf8d406cf509908035d12c9a04f0add12f3c7c7
Signed-off-by: Kuogee Hsieh <khsieh@codeaurora.org>
Signed-off-by: Naseer Ahmed <naseer@codeaurora.org>
Frame buffer's (fb0) ref_count's need to be balanced. overlay_play()
increases fb0's ref_count (fget_light). This patch will decrease fb0's
ref_count by calling fput_light after commit.
Change-Id: I352da1fce99b344c059f615a6fe88cc6e7387d89
Signed-off-by: Kuogee Hsieh <khsieh@codeaurora.org>
Signed-off-by: Naseer Ahmed <naseer@codeaurora.org>
Signed-off-by: Iliyan Malchev <malchev@google.com>
Not checking the error code, which might be negative, will cause us to wrongly
reference fdt[fd] by using the error code, causing kernel panic in fd_install.
Change-Id: I1f8e68e74bdbdd5b81bc3450f7d93b5cd96c9439
Signed-off-by: Iliyan Malchev <malchev@google.com>
Signed-off-by: Naseer Ahmed <naseer@codeaurora.org>
In some benchmark use case, graphic engine is extremely
busy, need increase the fence waiting timeout value.
Change-Id: I3c483f98fa86030b283edd8a79e7b70fa1c06335
Signed-off-by: Ken Zhang <kenz@codeaurora.org>
Signed-off-by: Naseer Ahmed <naseer@codeaurora.org>
To enable left-right flip x-scaling bit should be set for
MDP 4.2 and above versions. This fixes the issue when RGB layer
pipes are not properly rotated.
Change-Id: I0afae4aecde39ce3ac4dcbefc0bda93510e7d18a
Signed-off-by: Siddhartha Agrawal <agrawals@codeaurora.org>
Signed-off-by: Naseer Ahmed <naseer@codeaurora.org>
Upon receiving the notification of an HDMI cable connection,
turn on HDMI core only if the default video resolution is
supported by the sink. Otherwise, HDMI core would be turned
on at a later time when it is configured with a supported
resolution by the userspace.
CRs-Fixed: 412575
Change-Id: I67cfb09bafa39646839877a66cd94f193c127a76
Signed-off-by: Aravind Venkateswaran <aravindh@codeaurora.org>
HDMI switch device is used to notify userspace components of the
availabilty of a connected HDMI sink. These notification should
only be sent whenever HDMI cable is connected or disconnected.
This patch removes all the redundant notifications.
CRs-Fixed: 412575
Change-Id: Ia5e60690a87569fce5d61a9af75d446648443e9b
Signed-off-by: Aravind Venkateswaran <aravindh@codeaurora.org>
Add support for audio switch node in the HDMI driver that would
be used to notify audio userspace components of the availability
of an HDMI device.
CRs-Fixed: 412575
Change-Id: Idc41caf234810db52af9fcc89d2ed4ecbcaafc3b
Signed-off-by: Aravind Venkateswaran <aravindh@codeaurora.org>
HDMI core should not be powered down until the audio engine has
shutdown transmitting packets to the HDMI core. This change
increases the time for which the driver waits for the audio
engine to turn off.
CRs-Fixed: 412575
Change-Id: Ie11ab6c8140f7289f74da4877c9acf9b8cd4a838
Signed-off-by: Aravind Venkateswaran <aravindh@codeaurora.org>
DTV device should not be powered down until the audio engine has
shutdown. This change moves dtv audio off sequence to a separate
thread so that framebuffer close system call does not get blocked.
CRs-Fixed: 412575
Change-Id: I246a9e58f1367e653913773696510f375abf3d3a
Signed-off-by: Aravind Venkateswaran <aravindh@codeaurora.org>
Implement Hot Plug Detect (HPD) software debouncing by
disabling the HPD interrupt until we finish processing
a previous HPD interrupt.
CRs-Fixed: 412575
Change-Id: Ia2c83f3446d09fe5bf6c6a1c4e6a9eb54ff465d6
Signed-off-by: Aravind Venkateswaran <aravindh@codeaurora.org>
For HDMI as primary case, we need to blackout the pipes
when they are unset so that any residue is not visible
on the DTV during suspend.
Change-Id: I2bf36f1002dd185c26fe6c4291977737daa73ae1
Signed-off-by: Ajay Singh Parmar <aparmar@codeaurora.org>
Signed-off-by: Aravind Venkateswaran <aravindh@codeaurora.org>
While changing the audio sampling rate, the older data in
the control register needs to cleaned before writing in
new data to avoid mixed or wrong data writing.
CRs-Fixed: 405772
Change-Id: I95d0807ea8cf544e4a0c8caed00de6cd60352efa
Signed-off-by: Ajay Singh Parmar <aparmar@codeaurora.org>
Signed-off-by: Aravind Venkateswaran <aravindh@codeaurora.org>
Remove the kernel config parameter for HDCP since enabling or
disabling HDCP will now be controlled using a corresponding
module parameter.
Change-Id: Iae23b8fa66ca75d99423547e77f850f3c86615ee
Signed-off-by: Aravind Venkateswaran <aravindh@codeaurora.org>
This change removes the need to use HDCP feature flags in the
HDMI driver and adds the necessary support to configure HDCP
feature based on a module parameter.
Change-Id: Ie0eacc5b447230927cfdedfcb979c22d60e81981
Signed-off-by: Aravind Venkateswaran <aravindh@codeaurora.org>
This change adds a module parameter that can be used
to disable HDCP at runtime by specifying hdmi_msm.hdcp=0
on the fastboot command line.
Change-Id: Ifad5da9fcb86fb4ed663a5ef2bb14fe4dafd241e
Signed-off-by: Aravind Venkateswaran <aravindh@codeaurora.org>
Currently, HPD(Hot Plug Detection, a module used for detecting
HDMI cable connection) soft debouncing logic implements around
1 sec mechanism to stabilize HPD event detection. In case of
fast HPD connect/disconnect, it is missing a real HPD event.
This change implements a new debouncing logic in driver which
will make sure the first real HPD event is correctly processed
and at the end of debouncing processing, if there is a change
in HPD state, the changed state is also processed. This way we
always process the change of HPD states.
CRs-Fixed: 384513
Change-Id: I02d9814e4a55b7eec11a8e0d134c9ed9b5747422
Signed-off-by: Ajay Singh Parmar <aparmar@codeaurora.org>
Signed-off-by: Aravind Venkateswaran <aravindh@codeaurora.org>
This change writes the checksum value to registers after
doing all the calculations so that the correct checksum
value is transmitted.
CRs-Fixed: 388272
Change-Id: Ia0543e458d5a11b148bd29e0d57ae355a051b2a9
Signed-off-by: Ajay Singh Parmar <aparmar@codeaurora.org>
Signed-off-by: Aravind Venkateswaran <aravindh@codeaurora.org>
At suspend, turn off mdp related clocks off if clocks
are not turned off by vsync disable request.
Change-Id: I0949b00b9ee0aee05b9b553ac7318b647052d94d
Signed-off-by: Kuogee Hsieh <khsieh@codeaurora.org>
(cherry picked from commit 780557dc178fc5511f4c03b4840791d27499a5f6)
After pipe_commit() released mutex and before kickoff happens,
There has possibility that dcs command may start transmitted.
This patch add dsi_mdp_busy flag to fix this race condition.
Change-Id: I0d9a81cd0719085c91c03386117261ad3bb6b182
Signed-off-by: Kuogee Hsieh <khsieh@codeaurora.org>
(cherry picked from commit c9427ced2ab4cf1094b61360a476305066044a54)
Add video mode dcs command list support. This patch
make sure dcs commands committed while dsi video engine
is busy so that dcs command will be transmitted at beginning
of next BLLP.
Change-Id: I11b0214ee10f3b1ef33b1da4c8e577800068cb06
Signed-off-by: Kuogee Hsieh <khsieh@codeaurora.org>
(cherry picked from commit 7b0e0a45216714d76bf717a928a0db77bfa2868a)
Both vsync enabled and disabled are controlled by framework
through ioctl. Driver reports vsync event to framework via
sysfs. Meanwhile, mdp related clocks are enabled by frame
work at vsync enabled request and disabled by driver if there
is no any display update within specifid vsync period.
Change-Id: Ice5be3a6db5930b95bdd2f718d9256bf73936e23
Signed-off-by: Kuogee Hsieh <khsieh@codeaurora.org>
(cherry picked from commit 3c406e4eec79b710b7f5b5b67c23db7af871be40)
Ensure that when backlight scaling ratio or backlight level is being
changed that the operation execute atomically. This prevents a backlight
level change from being overwritten when it interrupts a backlight scale
update.
CRs-Fixed: 404017
Signed-off-by: Carl Vanderlip <carlv@codeaurora.org>
(cherry picked from commit ce328861aa1f4fa489e9abfc9d1e02b13af2ba47)
Signed-off-by: Dhivya Subramanian <dthiru@codeaurora.org>
(cherry picked from commit 0584596f75f8f2b184b8be1a0479ee61e449acba)
Change-Id: Ifb4bd5e823815b51dae38f1b8647b80d21b8ee45
Signed-off-by: Sudhir Sharma <sudsha@codeaurora.org>
Filled length of the output buffer at FBD for videos
with frame height less than 96 was incorrect. With
this change, we get the proper filled length.
CRs-fixed: 395179
Signed-off-by: Deepak Verma <dverma@codeaurora.org>
(cherry picked from commit f01274b904a4899b13c64f35f2479a1080bfb2c4)
Change-Id: I88fdf915647d8a2123175599931fbdd4b7d1ddf0
Signed-off-by: Sudhir Sharma <sudsha@codeaurora.org>
Video driver should free client context when an error
is encoutered.
Signed-off-by: Gopikrishnaiah Anandan <agopik@codeaurora.org>
(cherry picked from commit 9683019e54e8a8c38b6019b781a9cbdf41b84b29)
Change-Id: I9868afadb01cc63df8e09426a8dd112b08f2bd4e
Signed-off-by: Sudhir Sharma <sudsha@codeaurora.org>
Added a check for non-zero virtual address.
Without this change, when ion_map_iommu returns a
zero virtual address, video core continuous ahead
without error check and later target reset happens
when trying to do a ion_unmap_iommu on the above fd,
which was never mapped.
Signed-off-by: Arun Menon <menon@codeaurora.org>
(cherry picked from commit 8688368ce3afbd1f3a80c7fa688c6a2f467247d3)
Change-Id: Ic6d86cc621e2f524dd19d1677646822cdc0f317c
Signed-off-by: Sudhir Sharma <sudsha@codeaurora.org>
Change will handle codec config buffer with EOS.
Video driver will make sure that the codec config buffer with
EOS will be requeued in case of reconfig and non-reconfig paths.
CRs-fixed: 399347
Signed-off-by: Gopikrishnaiah Anandan <agopik@codeaurora.org>
(cherry picked from commit 43b203869814fe5f0ddcb265a8f859aebdaa652f)
Change-Id: Ib9a41fb842d2295804db86b2e03a62238c29984d
Signed-off-by: Dhivya Subramanian <dthiru@codeaurora.org>
Signed-off-by: Neha Pandey <nehap@codeaurora.org>
This change will ensure that video core clock is
set to 266Mhz on supported devices, else fallback
to 228Mhz.
Signed-off-by: Arun Menon <menon@codeaurora.org>
(cherry picked from commit 2cd6f1a77d845c162966b974b0e9dd4db0878020)
Change-Id: Ie9d28b218150f2e21fa95c4d4346251ddab3ee50
Signed-off-by: Dhivya Subramanian <dthiru@codeaurora.org>
Signed-off-by: Neha Pandey <nehap@codeaurora.org>
Support is added for MPEG-2 extension and user data. With this
changes Core returns extension and user data as an extradata.
Change-Id: I66a230aa651dabafa883625ce9f687d5c35b8671
Signed-off-by: Shobhit Pandey <cshopan@codeaurora.org>
Signed-off-by: Neha Pandey <nehap@codeaurora.org>
In slice delivery mode, sometimes video hardware is giving
zero frame tag on output slices instead of input frame tag
value. This commit will fix the issue by copying the input
frame tag value to the output slice frame tag when video
hardware gives zero frame tag values.
Change-Id: Icc75ca72375c4445ff9becaea45b43c03a6ddc17
Signed-off-by: Maheshwar Ajja <majja@codeaurora.org>
Signed-off-by: Ramakrishna Prasad N <crpn@codeaurora.org>
Signed-off-by: Neha Pandey <nehap@codeaurora.org>
This commit will add support for pause command in
eos state along with run state of the video driver.
Change-Id: I7edd064bb68845f63f0a085165e99f60ed0f3bfe
CRs-fixed: 387562
Signed-off-by: Maheshwar Ajja <majja@codeaurora.org>
Signed-off-by: Neha Pandey <nehap@codeaurora.org>
The slices completed is not matching with the expected number
of slices in frame done. The fix is available in July firmware
release and this commit will have the corresponding video driver
changes.
Change-Id: Ic0c3c7ce4f9fdbcd6e8bed852a93dcc533d83a02
CRs-fixed: 380629
Signed-off-by: Maheshwar Ajja <majja@codeaurora.org>
Signed-off-by: Neha Pandey <nehap@codeaurora.org>
These messages are non-fatal and appear frequently
during video session. Hence suppressing them.
Change-Id: I539bc966bd79b4074c82a432ba7eb3fd2746bf54
CRs-Fixed: 389408
Signed-off-by: Arun Menon <menon@codeaurora.org>
Signed-off-by: Neha Pandey <nehap@codeaurora.org>
Support is added to enable temporary buffer for processing
the MPEG-2 extension and user data for the first sequence
done.
Change-Id: Ib7fdc8bfd50bfb0da651e8da6fca26a3542c671e
Signed-off-by: Shobhit Pandey <cshopan@codeaurora.org>
Signed-off-by: Neha Pandey <nehap@codeaurora.org>
All msm_ion clients need to use <linux/msm_ion.h> instead of
<linux/ion.h>
Change-Id: I521a079686780c117ccc9d91f27b9c59aaeafa04
Signed-off-by: Mitchel Humpherys <mitchelh@codeaurora.org>
Signed-off-by: Neha Pandey <nehap@codeaurora.org>
Read IDR picture type from 1080p core register set
and propagate it to user space using IDR frame type
enumeration in api header file. The IDR frame type
info is used in SYNCFRAME logic for H264 format in
userspace.
Change-Id: I6f87aea9f3c6e26b06effe68f7cb5a6c17d4bb1c
Signed-off-by: Maheshwar Ajja <majja@codeaurora.org>
Signed-off-by: Neha Pandey <nehap@codeaurora.org>
- video core is bumped up to turbo mode, if more performance
level required from multiple clients.
- Enable turbo mode atleast one of client set turbo mode.
Change-Id: Ied777463fdfe54ea6ff3b2a29cbaf0d27a9586cb
CRs-Fixed: 385454
Signed-off-by: Srinu Gorle <sgorle@codeaurora.org>
Signed-off-by: Neha Pandey <nehap@codeaurora.org>
Wait for 2 ms to make sure both dsi lanes are in stop state and
fifo are empty before reseting dsi controller.
Signed-off-by: Kuogee Hsieh <khsieh@codeaurora.org>
During the blank sequence, base layer will be removed if mfd
reference count is 0. Need to add some delay to make sure it
takes effect before turning off panel.
Signed-off-by: Ken Zhang <kenz@codeaurora.org>
The transition of BLT enable and disable start at the beginning
of vsync. This ensures that the transition is completed within the
same vsync period. We Wait for DMA-P done after turning off the
timing generator and do not prefill the frame.
Signed-off-by: Kuogee Hsieh <khsieh@codeaurora.org>
- Add switch device node for hdmi audio on initialization.
- Final node path will be /devices/virtual/switch/hdmi_audio
- Set the node state to 1 when the HDMI EDID for the sink
supports audio
- Set the node state to 0 otherwise(DVI)
Signed-off-by: Arun Kumar K.R <akumarkr@codeaurora.org>
msm_fb_blank_sub might be called for UNBLANK from
display update work queue, which is at commit state.
Idle detection is invalid in this situation
Add detection for external snd earlyuspend/resume interface.
Signed-off-by: Ken Zhang <kenz@codeaurora.org>
Currently switching mdp blt mode is done in dmap done isr which could
cause mdp hang for some panels/targets. One option is added: turning
off timing generator when switching blt mode, to avoid hang issues.
Signed-off-by: Huaibin Yang <huaibiny@codeaurora.org>
Before execute operation on display, make sure it is complete idle
Because non-blocking display update has been introduced, need make sure
display update has finished in all entrances except the ones for
initialization.
Change-Id: I0660080262b7e5895f5f558c0a9f71aa84b9aa99
Signed-off-by: Ken Zhang <kenz@codeaurora.org>
Signed-off-by: Naseer Ahmed <naseer@codeaurora.org>
While searching for the available buffer entry in the buffer pool the search
should begin from index 1 as zeroth entry is reserved.
Change-Id: I051b0232bb782f073ba9ad0b757a799703814df3
Signed-off-by: Mohan Kumar Gubbihalli Lachma Naik <mgubbi@codeaurora.org>
Signed-off-by: Iliyan Malchev <malchev@google.com>
Mako's MIPI line clock is a little bit higher than LGSI's recommendation. Due
to this higher clock, flickering could happen in some panels. This patch
reduces the MIPI line clock as LGSI's recommendation.
This also reduces current consumption by ~10mA when the LCD is on.
Signed-off-by: Iliyan Malchev <malchev@google.com>
In suspend state, fb_open cannot turn on panel, need save this info
for resume.
In suspend state, blank setting needs be cached to be used at resuming.
Signed-off-by: Ken Zhang <kenz@codeaurora.org>
Allowing the MDP clock to use its Max clock in order to avoid the blt
mode switch issues for both MDP mixers, as blt mode switch resulting
in HW hung
Signed-off-by: Nagamalleswararao Ganji <nganji@codeaurora.org>
Non-secure session should be rejected if a secure session is
running.
Change-Id: I13364a7bc4417a682728be333681278e7de8a1f7
Signed-off-by: Gopikrishnaiah Anandan <agopik@codeaurora.org>
Overlay_play() adds a pipe into pending queue and pan_display()
will commit those pipes to hardware and empty queue. This patch
will make sure queue is empty at suspend so that no unexpected
pipes will be commited to hardware by pan_display() at resume.
Otherwise, iommu page fault may happen.
Signed-off-by: Kuogee Hsieh <khsieh@codeaurora.org>
Signed-off-by: Naseer Ahmed <naseer@codeaurora.org>
HDCP authentication should be kicked off as a scheduled work
item so as to ensure that MDP is already configured and frames
are being transmitted over the HDMI channel prior to the start
of the HDCP authentication procedure.
Change-Id: I27cab44babfc24d91a318b0641674f85910cc33f
Signed-off-by: Aravind Venkateswaran <aravindh@codeaurora.org>
Signed-off-by: Saurabh Shah <saurshah@codeaurora.org>
Support waiting for acquire fences in the buffer sync ioctl.
Signed-off-by: Ken Zhang <kenz@codeaurora.org>
Signed-off-by: Naseer Ahmed <naseer@codeaurora.org>
Display commit ioctl will do what pan_display
can do, addtionally has customized setting, such
as non-blocking call.
Signed-off-by: Ken Zhang <kenz@codeaurora.org>
Signed-off-by: Naseer Ahmed <naseer@codeaurora.org>
Schedule a workqueue, do the current job in the workqueue handler.
Block the second entry if the first one has not finished
Change-Id: I9466c7795bd9d6765f468bf30f4021802d904c36
Signed-off-by: Ken Zhang <kenz@codeaurora.org>
Conflicts:
drivers/video/msm/msm_fb.c
Signed-off-by: Naseer Ahmed <naseer@codeaurora.org>
Wait for fence signaled before commit, signal previous
fence after commit done. Same as pan display
Signed-off-by: Ken Zhang <kenz@codeaurora.org>
Signed-off-by: Naseer Ahmed <naseer@codeaurora.org>
Replace sending of vsync timestamp using uevents with sysfs entry
as uevent result in increase in power numbers due to broadcast in
nature. Also, for smart panel, wait4vsync is removed.
Change-Id: I5219e85b837b8bab9d00a9f40c1048d2a2355194
Signed-off-by: Mayank Chopra <makchopra@codeaurora.org>
Signed-off-by: Kuogee Hsieh <khsieh@codeaurora.org>
Conflicts:
drivers/video/msm/mdp4_overlay_dsi_video.c
Signed-off-by: Naseer Ahmed <naseer@codeaurora.org>
DSI dcs commands and mdp pixel stream share same dsi link.
Add dcs command list to serialize sending dcs command and mdp
pixel stream to avoid contention which may cause dsi controller
to stall.
Change-Id: Ie0e687f45be479d2137eb7b56b8d32040fba2044
Signed-off-by: Kuogee Hsieh <khsieh@codeaurora.org>
Conflicts:
drivers/video/msm/mdp4.h
Signed-off-by: Naseer Ahmed <naseer@codeaurora.org>
Reverting this change allows display underflows to cause flashes of blue, which
will help prove that underflows are occurring.
This reverts commit e6f596dbcd307e33e4e4842914a027c7f7138bd9.
Video driver will close the instance if secure call fails.
Change-Id: I39147272a9183f011529078fe8a18ac8cb2726fd
Signed-off-by: Gopikrishnaiah Anandan <agopik@codeaurora.org>
Signed-off-by: Ajay Dudani <adudani@codeaurora.org>
Signed-off-by: Iliyan Malchev <malchev@google.com>
