Commit graph

36022 commits

Author SHA1 Message Date
Jamie Lenehan
a09749dd86 sh: Titan board support.
Add support for the titan board.

Signed-off-by: Jamie Lenehan <lenehan@twibble.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27 15:05:39 +09:00
Paul Mundt
b7e108ee63 sh: BSS init bugfix and barrier in entry point.
A synco is needed before we jump to start_kernel().

While we're at it, also move the sh_cpu_init() jump until after
we've zeroed BSS, as this has caused some undesirable results
in sh_cpu_init().

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27 15:00:04 +09:00
Paul Mundt
298476220d sh: Add control register barriers.
Currently when making changes to control registers, we
typically need some time for changes to take effect (8
nops, generally).  However, for sh4a we simply need to
do an icbi..

This is a simple patch for implementing a general purpose
ctrl_barrier() which functions as a control register write
barrier. There's some additional documentation in the patch
itself, but it's pretty self explanatory.

There were also some places where we were not doing the
barrier, which didn't seem to have any adverse effects on
legacy parts, but certainly did on sh4a. It's safer to have
the barrier in place for legacy parts as well in these cases,
though this does make flush_tlb_all() more expensive (by an
order of 8 nops).  We can ifdef around the flush_tlb_all()
case for now if it's clear that all legacy parts won't have
a problem with this.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27 14:57:44 +09:00
Paul Mundt
749cf48692 sh: Add flag for MMU PTEA capability.
Add CPU_HAS_PTEA, refactor some of the cpu flag settings.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27 14:55:41 +09:00
kogiidena
94c0fa520c sh: landisk board support.
This adds support for the I-O DATA Landisk.

Signed-off-by: kogiidena <kogiidena@eggplant.ddo.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27 14:53:35 +09:00
Paul Mundt
634bf4f69b sh: Fix libata build.
Drop virt_to_bus() from sg_dma_address() so libata builds.
While we're at it, move sg_dma_address() and sg_dma_len()
from pci.h to scatterlist.h.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27 14:48:09 +09:00
Ollie Wild
24ab54cb49 sh: Fix TCP payload csum bug in csum_partial_copy_generic().
There's a bug in the Hitachi SuperH csum_partial_copy_generic()
implementation.  If the supplied length is 1 (and several alignment
conditions are met), the function immediately branches to label 4.
However, the assembly at label 4 expects the length to be stored in
register r2.  Since this has not occurred, subsequent behavior is
undefined.

This can cause bad payload checksums in TCP connections.

I've fixed the problem by initializing register r2 prior to the branch
instruction.

Signed-off-by: Ollie Wild <aaw@rincewind.tv>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27 14:46:24 +09:00
Paul Mundt
8b395265f8 sh: Fix fatal oops in copy_user_page() on sh4a (SH7780).
We had a pretty interesting oops happening, where copy_user_page()
was down()'ing p3map_sem[] with a bogus offset (particularly, an
offset that hadn't been initialized with sema_init(), due to the
mismatch between cpu_data->dcache.n_aliases and what was assumed
based off of the old CACHE_ALIAS value).

Luckily, spinlock debugging caught this for us, and so we drop
the old hardcoded CACHE_ALIAS for sh4 completely and rely on the
run-time probed cpu_data->dcache.alias_mask. This in turn gets
the p3map_sem[] index right, and everything works again.

While we're at it, also convert to 4-level page tables..

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27 14:38:02 +09:00
Paul Mundt
75c92acdd5 sh: Wire up new syscalls.
The syscall table has lagged behind a bit, wire up the new ones..

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27 14:36:44 +09:00
Alexey Dobriyan
ef9a1d4c0c sh: remove cpu_online() definition from <asm/smp.h>
It's defined in <linux/cpumask.h> and log is horribly flooded by
"redefined" messages.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27 14:32:57 +09:00
Paul Mundt
5b19c9081f sh: Support for SH7770/SH7780 CPU subtypes.
Merge support for SH7770 and SH7780 SH-4A subtypes.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27 14:31:40 +09:00
Paul Mundt
555ef19630 sh: Add SH7750S/SH7091 rules for SH7750 oprofile driver.
Update oprofile build rules for additional subtypes,
particularly SH7750S/SH7091.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27 14:30:11 +09:00
Paul Mundt
a80fd21e52 sh: earlyprintk= support and cleanups.
Allow multiple early printk consoles via earlyprintk=.

With this change earlyprintk is no longer enabled by default,
it must be specified on the kernel command line. Optionally
with ,keep to prevent unreg by tty_io.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27 14:26:53 +09:00
Paul Mundt
e86d6b66f5 sh: prefetch()/prefetchw() support.
SH-2/3/4 are able to prefetch, add support for it..

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27 14:20:54 +09:00
Toshinobu Sugioka
e7be853df7 sh: Fix a sign extension bug in memset().
Minor sign-extension bug in SH-specific memset()..

Signed-off-by: Toshinobu Sugioka <sugioka@itonet.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27 14:13:14 +09:00
Paul Mundt
73388cc7c6 sh: Refactor PRR masking to catch newer SH7760 cuts.
Newer SH7760 cuts have a range of acceptable PRR values..

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27 14:11:33 +09:00
Richard Curnow
b638d0b921 sh: Optimized cache handling for SH-4/SH-4A caches.
This reworks some of the SH-4 cache handling code to more easily
accomodate newer-style caches (particularly for the > direct-mapped
case), as well as optimizing some of the old code.

Signed-off-by: Richard Curnow <richard.curnow@st.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27 14:09:26 +09:00
Paul Mundt
fdfc74f9fc sh: Support for SH-4A memory barriers.
SH-4A supports 'synco' as a barrier, sprinkle it around
the cache ops as necessary..

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27 14:05:52 +09:00
Paul Mundt
36efc35447 sh: RTS7751R2D board updates.
More of the same, trivial cleanups, and moving options to their
own board-specific Kconfig.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27 14:02:09 +09:00
Paul Mundt
e8fb67f8e0 sh: HS7751RVoIP board updates.
Various cleanups for HS7751RVoIP. Mostly just getting
rid of the old mach.c and splitting codec configuration
in to its own Kconfig.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27 13:56:28 +09:00
Andriy Skulysh
7e27b9b720 sound: SH DAC audio driver updates.
Update the SH DAC audio driver for the clock framework.

Signed-off-by: Andriy Skulysh <askulysh@gmail.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27 13:48:32 +09:00
Andriy Skulysh
048839dc54 video: hitfb suspend/resume and updates.
suspend/resume support for hitfb, as well as some other
minor cleanups.

Signed-off-by: Andriy Skulysh <askulysh@gmail.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27 13:47:22 +09:00
Paul Mundt
6d75e650f1 sh: Move hd64461.h to a more sensible location.
With the I/O rework for hd64461 we're down to a single header,
so move it by itself and get rid of the directory.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27 13:42:57 +09:00
Paul Mundt
d95fb13c96 sh: Fixup TMU_TOCR definition for SH7300.
SH7300 has a different TMU_TOCR, make the TMU code work again.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27 13:30:08 +09:00
Paul Mundt
3530570fd4 sh: Kill off dead code for SE and SystemH boards.
Some of these have suffered some bitrot, and so there is
some degree of dead code that has been left sitting around,
clean it up..

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27 13:28:23 +09:00
Paul Mundt
5c930e8cbf video: Disable vgacon for SuperH.
We don't support this on SH, so just disable it..

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27 13:20:22 +09:00
Paul Mundt
3f787fe2e0 sh: hugetlb updates.
For some of the larger sizes we permitted spanning pages
across several PTEs, but this turned out to not be generally
useful. This reverts the sh hugetlbpage interface to something
more sensible using huge pages at single PTE granularity.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27 13:11:57 +09:00
Andriy Skulysh
4bcac20a7a sh: hp6xx mach-type cleanups.
Some minor cleanups for the updated consolidated hp6xx
mach-type.

Signed-off-by: Andriy Skulysh <askulysh@gmail.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27 13:07:38 +09:00
Paul Mundt
e4c2cfee5d sh: Various cosmetic cleanups.
We had quite a bit of whitespace damage, clean most of it up..

Signed-off-by: Stuart Menefy <stuart.menefy@st.com>
Signed-off-by: Arthur Othieno <a.othieno@bluewin.ch>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27 12:31:01 +09:00
Paul Mundt
a56d276c05 sh: Make hs7751rvoip/rts7751r2d use pm_power_off.
These were previously sprinkled in machine_power_off(),
though missed being updated when the rest of the boards
switched over.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27 11:43:24 +09:00
Paul Mundt
50e98e72e4 sh: Kill off the .stack section.
We had a special .stack section in the ld script that
was being used to position r15 initially. This is
nonsensical, as we can just use a THREAD_SIZE offset
from the init_thread_union instead (as every other arch
does).

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27 11:40:05 +09:00
Paul Mundt
6ae5e8d759 sh: Fix kGDB NMI handling.
in_nmi shifted down a few labels, so we were inadvertently
clearing the lower byte of do_syscall_trace, badness ensues.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27 11:37:33 +09:00
Paul Mundt
1c5f8f85df sh: Move syscall table in to syscall.S.
Move the syscall table in to its own file, as per sh64. The entry.S
bits will end up being considerably different in the sh2/sh2a cases,
so this lets us keep things in sync somewhat..

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27 11:36:10 +09:00
Paul Mundt
765ae317ce sh: Fixup some uninitialized spinlocks.
Fix use of uninitialized spinlocks, caught with spinlock debugging..

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27 11:31:32 +09:00
Paul Mundt
a252710fc5 sh: flush_cache_range() cleanup and optimizations.
flush_cache_range() wasn't page aligning the end of the range,
we can't assume that it will always be page aligned, and we
ended up getting unaligned faults in some rare call paths.

Additionally, we add a small optimization to just purge the
dcache entirely if the range is large enough that the page
table walking will take longer. We use an arbitrary value of
64 pages for the large range size, as per sh64.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27 11:29:55 +09:00
Tom Rini
e4e3b5ccd7 sh: Add a simple cmpxchg().
We didn't have one of these before, a simple implementation
borrowed from MIPS as well as the __HAVE_ARCH_CMPXCHG bits.

Signed-off-by: Tom Rini <trini@kernel.crashing.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27 11:28:20 +09:00
Paul Mundt
0c91c1a701 sh: Move smc37c93x.h for SystemH board use.
SystemH needs this header as well, not just 770x SE.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27 11:16:20 +09:00
Linus Torvalds
b278240839 Merge branch 'for-linus' of git://one.firstfloor.org/home/andi/git/linux-2.6
* 'for-linus' of git://one.firstfloor.org/home/andi/git/linux-2.6: (225 commits)
  [PATCH] Don't set calgary iommu as default y
  [PATCH] i386/x86-64: New Intel feature flags
  [PATCH] x86: Add a cumulative thermal throttle event counter.
  [PATCH] i386: Make the jiffies compares use the 64bit safe macros.
  [PATCH] x86: Refactor thermal throttle processing
  [PATCH] Add 64bit jiffies compares (for use with get_jiffies_64)
  [PATCH] Fix unwinder warning in traps.c
  [PATCH] x86: Allow disabling early pci scans with pci=noearly or disallowing conf1
  [PATCH] x86: Move direct PCI scanning functions out of line
  [PATCH] i386/x86-64: Make all early PCI scans dependent on CONFIG_PCI
  [PATCH] Don't leak NT bit into next task
  [PATCH] i386/x86-64: Work around gcc bug with noreturn functions in unwinder
  [PATCH] Fix some broken white space in ia32_signal.c
  [PATCH] Initialize argument registers for 32bit signal handlers.
  [PATCH] Remove all traces of signal number conversion
  [PATCH] Don't synchronize time reading on single core AMD systems
  [PATCH] Remove outdated comment in x86-64 mmconfig code
  [PATCH] Use string instructions for Core2 copy/clear
  [PATCH] x86: - restore i8259A eoi status on resume
  [PATCH] i386: Split multi-line printk in oops output.
  ...
2006-09-26 13:07:55 -07:00
Linus Torvalds
dd77a4ee0f Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/driver-2.6
* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/driver-2.6: (47 commits)
  Driver core: Don't call put methods while holding a spinlock
  Driver core: Remove unneeded routines from driver core
  Driver core: Fix potential deadlock in driver core
  PCI: enable driver multi-threaded probe
  Driver Core: add ability for drivers to do a threaded probe
  sysfs: add proper sysfs_init() prototype
  drivers/base: check errors
  drivers/base: Platform notify needs to occur before drivers attach to the device
  v4l-dev2: handle __must_check
  add CONFIG_ENABLE_MUST_CHECK
  add __must_check to device management code
  Driver core: fixed add_bind_files() definition
  Driver core: fix comments in drivers/base/power/resume.c
  sysfs_remove_bin_file: no return value, dump_stack on error
  kobject: must_check fixes
  Driver core: add ability for devices to create and remove bin files
  Class: add support for class interfaces for devices
  Driver core: create devices/virtual/ tree
  Driver core: add device_rename function
  Driver core: add ability for classes to handle devices properly
  ...
2006-09-26 11:49:46 -07:00
Heiko Carstens
e8216dee83 [PATCH] s390: fix cmm kernel thread handling
Convert cmm's usage of kernel_thread to kthread_run.  Also create the
cmmthread at module load time, so it is possible to check if creation of
the thread fails.

In addition the cmmthread now gets terminated when the module gets unloaded
instead of leaving a stale kernel thread.  Also check the return values of
other registration functions at module load and handle their return values
appropriately.

Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-26 08:49:11 -07:00
Jeff Dike
e8df8c3304 [PATCH] Make UML use ptrace-abi.h
Include the host architecture's ptrace-abi.h instead of ptrace.h.

There was some cpp mangling of names around the ptrace.h include to avoid
symbol clashes between UML and the host architecture.  Most of these can go
away.  The exception is struct pt_regs, which is convenient to have in
userspace, but must be renamed in order that UML can define its own.

ptrace-x86_64.h needed to have some now-obsolete cpp cruft and a declaration
removed.

Signed-off-by: Jeff Dike <jdike@addtoit.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-26 08:49:10 -07:00
Jeff Dike
70e0eb8ef1 [PATCH] Split i386 and x86_64 ptrace.h
The use of SEGMENT_RPL_MASK in the i386 ptrace.h introduced by
x86-allow-a-kernel-to-not-be-in-ring-0.patch broke the UML build, as UML
includes the underlying architecture's ptrace.h, but has no easy access to the
x86 segment definitions.

Rather than kludging around this, as in the past, this patch splits the
userspace-usable parts, which are the bits that UML needs, of ptrace.h into
ptrace-abi.h, which is included back into ptrace.h.  Thus, there is no net
effect on i386.

As a side-effect, this creates a ptrace header which is close to being usable
in /usr/include.

x86_64 is also treated in this way for consistency.  There was some trailing
whitespace there, which is cleaned up.

Signed-off-by: Jeff Dike <jdike@addtoit.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-26 08:49:10 -07:00
Alan Cox
b1fc0b1f21 [PATCH] UML: tty locking
Ensure current->signal->tty doesn't get freed during log_exec().

Signed-off-by: Alan Cox <alan@redhat.com>
Acked-by: Jeff Dike <jdike@addtoit.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-26 08:49:09 -07:00
Jeff Dike
75e29b18d9 [PATCH] uml: stack usage reduction
The KSTK_* macros used an inordinate amount of stack.  In order to overcome
an impedance mismatch between their interface, which just returns a single
register value, and the interface of get_thread_regs, which took a full
pt_regs, the implementation created an on-stack pt_regs, filled it in, and
returned one field.  do_task_stat calls KSTK_* twice, resulting in two
local pt_regs, blowing out the stack.

This patch changes the interface (and name) of get_thread_regs to just
return a single register from a jmp_buf.

The include of archsetjmp.h" in registers.h to get the definition of
jmp_buf exposed a bogus include of <setjmp.h> in start_up.c.  <setjmp.h>
shouldn't be used anywhere any more since UML uses the klibc
setjmp/longjmp.

Signed-off-by: Jeff Dike <jdike@addtoit.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-26 08:49:09 -07:00
Paolo 'Blaisorblade' Giarrusso
bf61f50d63 [PATCH] uml: clean our set_ether_mac
Clean set_ether_mac usage.  Maybe could also be removed, but surely it can't
be a global function taking a void* argument.

Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Acked-by: Jeff Dike <jdike@addtoit.com>
Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-26 08:49:09 -07:00
Jeff Dike
602cc24181 [PATCH] uml: Remove unused variable
timer_irq_inited was useless, so it is removed.

Signed-off-by: Jeff Dike <jdike@addtoit.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-26 08:49:08 -07:00
Jeff Dike
537ae946e8 [PATCH] uml: timer cleanups
set_interval returns an error instead of panicing if setitimer fails.  Some of
its callers now check the return.

enable_timer is largely tt-mode-specific, so it is marked as such, and the
only skas-mode caller is made to call set-interval instead.

user_time_init was a no-value-added wrapper around set_interval, so it is
gone.

Since set_interval is now called from kernel code, callers no longer pass
ITIMER_* to it.  Instead, they pass a flag which is converted into ITIMER_REAL
or ITIMER_VIRTUAL.

Signed-off-by: Jeff Dike <jdike@addtoit.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-26 08:49:08 -07:00
Jeff Dike
4b84c69b5f [PATCH] uml: Move signal handlers to arch code
Have most signals go through an arch-provided handler which recovers the
sigcontext and then calls a generic handler.  This replaces the
ARCH_GET_SIGCONTEXT macro, which was somewhat fragile.  On x86_64, recovering
%rdx (which holds the sigcontext pointer) must be the first thing that
happens.  sig_handler duly invokes that first, but there is no guarantee that
I can see that instructions won't be reordered such that %rdx is used before
that.  Having the arch provide the handler seems much more robust.

Some signals in some parts of UML require their own handlers - these places
don't call set_handler any more.  They call sigaction or signal themselves.

Signed-off-by: Jeff Dike <jdike@addtoit.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-26 08:49:07 -07:00
Jeff Dike
19bdf0409f [PATCH] uml: SIGIO cleanups
- Various cleanups in the sigio code.

- Removed explicit zero-initializations of a few structures.

- Improved some error messages.

- An API change - there was an asymmetry between reactivate_fd calling
  maybe_sigio_broken, which goes through all the machinery of figuring out if
  a file descriptor supports SIGIO and applying the workaround to it if not,
  and deactivate_fd, which just turns off the descriptor.

  This is changed so that only activate_fd calls maybe_sigio_broken, when
  the descriptor is first seen.  reactivate_fd now calls add_sigio_fd, which
  is symmetric with ignore_sigio_fd.

  This removes a recursion which makes a critical section look more critical
  than it really was, obsoleting a big comment to that effect.  This requires
  keeping track of all descriptors which are getting the SIGIO treatment, not
  just the ones being polled at any given moment, so that reactivate_fd,
  through add_sigio_fd, doesn't try to tell the SIGIO thread about descriptors
  it doesn't care about.

Signed-off-by: Jeff Dike <jdike@addtoit.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-26 08:49:07 -07:00
Jeff Dike
6edf428ed1 [PATCH] uml: Improve SIGBUS diagnostics
UML can get a SIGBUS anywhere if the tmpfs mount being used for its memory
runs out of space.  This patch adds a printk before the panic to provide a
clue as to what likely went wrong.

Signed-off-by: Jeff Dike <jdike@addtoit.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-26 08:49:07 -07:00