Commit graph

65391 commits

Author SHA1 Message Date
Satyam Sharma
0cc120bea1 [NET] netconsole: Use netif_running() in write_msg()
Based upon initial work by Keiichi Kii <k-keiichi@bx.jp.nec.com>.

Avoid unnecessarily disabling interrupts and calling netpoll_send_udp() if the
corresponding local interface is not up.

Signed-off-by: Satyam Sharma <satyam@infradead.org>
Acked-by: Keiichi Kii <k-keiichi@bx.jp.nec.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10 16:48:03 -07:00
Satyam Sharma
d2b60881e2 [NET] netconsole: Simplify boot/module option setup logic
Based upon initial work by Keiichi Kii <k-keiichi@bx.jp.nec.com>.

Presently, boot/module parameters are set up quite differently for the case of
built-in netconsole (__setup() -> obsolete_checksetup() ->
netpoll_parse_options() -> strlen(config) == 0 in init_netconsole()) vs
modular netconsole (module_param_string() -> string copied to the config
variable -> strlen(config) != 0 init_netconsole() -> netpoll_parse_options()).

This patch makes both of them similar by doing exactly the equivalent of a
module_param_string() in option_setup() also -- just copying the param string
passed from the kernel command line into "config" variable.  So,
strlen(config) != 0 in both cases, and netpoll_parse_options() is always
called from init_netconsole(), thus making the setup logic for both cases
similar.

Now, option_setup() is only ever called / used for the built-in case, so we
put it inside a #ifndef MODULE, otherwise gcc will complain about
option_setup() being "defined but not used".  Also, the "configured" variable
is redundant with this patch and hence removed.

Signed-off-by: Satyam Sharma <satyam@infradead.org>
Signed-off-by: Keiichi Kii <k-keiichi@bx.jp.nec.com>
Acked-by: Matt Mackall <mpm@selenic.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10 16:48:03 -07:00
Satyam Sharma
d133ccbdc3 [NET] netconsole: Remove bogus check
Based upon initial work by Keiichi Kii <k-keiichi@bx.jp.nec.com>.

The (!np.dev) check in write_msg() is bogus (always false), because: np.dev is
set by netpoll_setup(), which is called by init_netconsole() before
register_console(), so write_msg() cannot be triggered unless netpoll_setup()
successfully set np.dev.  Also np.dev cannot go away from under us, because
netpoll_setup() grabs us reference on it.  So let's remove the bogus check.

Signed-off-by: Satyam Sharma <satyam@infradead.org>
Acked-by: Keiichi Kii <k-keiichi@bx.jp.nec.com>
Acked-by: Matt Mackall <mpm@selenic.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10 16:48:02 -07:00
Satyam Sharma
d39badf05b [NET] netconsole: Cleanups, codingstyle, prettyfication
Based upon initial work by Keiichi Kii <k-keiichi@bx.jp.nec.com>.

(1) Remove unwanted headers.
(2) Mark __init and __exit as appropriate.
(3) Various trivial codingstyle and prettification stuff.

Signed-off-by: Satyam Sharma <satyam@infradead.org>
Signed-off-by: Keiichi Kii <k-keiichi@bx.jp.nec.com>
Acked-by: Matt Mackall <mpm@selenic.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10 16:48:02 -07:00
Stephen Hemminger
ab66b4a7a3 [IPV4] fib_trie: macro cleanup
This patch converts the messy macro for MASK_PFX to inline function
and expands TKEY_GET_MASK in the one place it is used.

Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10 16:48:01 -07:00
Stephen Hemminger
0680191642 [IPV4] fib_trie: cleanup
Try this out:
     * replace macro's with inlines
     * get rid of places doing multiple evaluations of NODE_PARENT

[akpm@linux-foundation.org: rcu_dereference wants an lval]

Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10 16:48:01 -07:00
Ilpo Järvinen
13dae42631 [TCP]: Update comment about highest_sack validity
This stale info came from the original idea, which proved to be
unnecessarily complex, sacked_out > 0 is easy to do and that when
it's going to be needed anyway (it _can_ be valid also when
sacked_out == 0 but there's not going to be a guarantee about it
for now).

Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10 16:48:00 -07:00
Ilpo Järvinen
e60402d0a9 [TCP]: Move sack_ok access to obviously named funcs & cleanup
Previously code had IsReno/IsFack defined as macros that were
local to tcp_input.c though sack_ok field has user elsewhere too
for the same purpose. This changes them to static inlines as
preferred according the current coding style and unifies the
access to sack_ok across multiple files. Magic bitops of sack_ok
for FACK and DSACK are also abstracted to functions with
appropriate names.

Note:
- One sack_ok = 1 remains but that's self explanary, i.e., it
  enables sack
- Couple of !IsReno cases are changed to tcp_is_sack
- There were no users for IsDSack => I dropped it

Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10 16:48:00 -07:00
Ilpo Järvinen
b9c4595bc4 [TCP]: Don't panic if S+L skb is detected
BUG_ON is an overkill. In fact, I was mislead by BUG_TRAP
severity (equals to WARN_ON) which is much lower than BUG_ON's
(that panics).

Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10 16:47:59 -07:00
Ilpo Järvinen
1b6d427bb7 [TCP]: Reduce sacked_out with reno when purging write_queue
Previously TCP had a transitional state during which reno
counted segments that are already below the current window into
sacked_out, which is now prevented. In addition, re-try now
the unconditional S+L skb catching.

This approach conservatively calls just remove_sack and leaves
reset_sack() calls alone. The best solution to the whole problem
would be to first calculate the new sacked_out fully (this patch
does not move reno_sack_reset calls from original sites and thus
does not implement this). However, that would require very
invasive change to fastretrans_alert (perhaps even slicing it to
two halves). Alternatively, all callers of tcp_packets_in_flight
(i.e., users that depend on sacked_out) should be postponed
until the new sacked_out has been calculated but it isn't any
simpler alternative.

Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10 16:47:58 -07:00
Ilpo Järvinen
d02596e329 [TCP]: Keep state in Disorder also if only lost_out > 0
This happens rather infrequently and is only possible during
FRTO. We must not allow TCP to slip to Open state because
tcp_fastretrans_alert might then not be called on it's time
when FRTO has exited. This become a problem when left_out
got removed and was replaced by just sacked_out.

Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10 16:47:58 -07:00
Ilpo Järvinen
86426c22d2 [TCP]: Restore over-zealous tcp_sync_left_out-like removals
tcp_verify_left_out is useful for verifying S+L condition, so
add it back to couple of places in where the code was not
calling to tcp_sync_left_out but used own ad-hoc solution
(before the tcp_sync_left_out got removed).

Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10 16:47:57 -07:00
Ilpo Järvinen
005903bc3a [TCP]: Left out sync->verify (the new meaning of it) & definify
Left_out was dropped a while ago, thus leaving verifying
consistency of the "left out" as only task for the function in
question. Thus make it's name more appropriate.

In addition, it is intentionally converted to #define instead
of static inline because the location of the invariant failure
is the most important thing to have if this ever triggers. I
think it would have been helpful e.g. in this case where the
location of the failure point had to be based on some quesswork:
    http://lkml.org/lkml/2007/5/2/464
...Luckily the guesswork seems to have proved to be correct.

Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10 16:47:57 -07:00
Ilpo Järvinen
83ae40885f [TCP]: Add tcp_left_out(tp) "back" to get cleaner looking lines
tp->left_out got removed but nothing came to replace it back
then (users just did addition by themselves), so add function
for users now.

Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10 16:47:56 -07:00
Ilpo Järvinen
b5860bbac7 [TCP]: Tighten tcp_sock's belt, drop left_out
It is easily calculable when needed and user are not that many
after all.

Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10 16:47:55 -07:00
Ilpo Järvinen
35e8694198 [TCP]: Remove num_acked>0 checks from cong.ctrl mods pkts_acked
There is no need for such check in pkts_acked because the
callback is not invoked unless at least one segment got fully
ACKed (i.e., the snd_una moved past skb's end_seq) by the
cumulative ACK's snd_una advancement.

Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10 16:47:55 -07:00
Ilpo Järvinen
af610b4ca1 [TCP]: Add tcp_dec_pcount_approx int variant
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10 16:47:54 -07:00
Ilpo Järvinen
bdf1ee5d3b [TCP]: Move code from tcp_ecn.h to tcp*.c and tcp.h & remove it
No other users exist for tcp_ecn.h. Very few things remain in
tcp.h, for most TCP ECN functions callers reside within a
single .c file and can be placed there.

Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10 16:47:54 -07:00
Ilpo Järvinen
539d243fdd [TCP]: Access to highest_sack obsoletes forward_cnt_hint
In addition, added a reference about the purpose of the loop.

Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10 16:47:53 -07:00
Ilpo Järvinen
9bff40fda0 [TCP] FRTO: remove unnecessary fackets/sacked_out recounting
F-RTO does not touch SACKED_ACKED bits at all, so there is no
need to recount them in tcp_enter_frto_loss. After removal of
the else branch, nested ifs can be combined.

This must also reset sacked_out when SACK is not in use as TCP
could have received some duplicate ACKs prior RTO. To achieve
that in a sane manner, tcp_reset_reno_sack was re-placed by the
previous patch.

Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10 16:47:53 -07:00
Ilpo Järvinen
4ddf66769d [TCP]: Move Reno SACKed_out counter functions earlier
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10 16:47:52 -07:00
David S. Miller
d06e021d71 [TCP]: Extract DSACK detection code from tcp_sacktag_write_queue().
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10 16:47:51 -07:00
Ilpo Järvinen
19b2b48658 [TCP]: Rexmit hint must be cleared instead of setting it
Stupid error from my side. Even though now that I noticed this,
I hoped it would have been an optimization but no, the counter
hint is then incorrect. Thus clearing is necessary for now (I
still suspect though that this path is never executed).

Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10 16:47:51 -07:00
Ilpo Järvinen
d8f4f2235a [TCP]: Extracted rexmit hint clearing from the LOST marking code
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10 16:47:50 -07:00
Ilpo Järvinen
d738cd8fca [TCP]: Add highest_sack seqno, points to globally highest SACK
It is guaranteed to be valid only when !tp->sacked_out. In most
cases this seqno is available in the last ACK but there is no
guarantee for that. The new fast recovery loss marking algorithm
needs this as entry point.

Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10 16:47:50 -07:00
Thomas Graf
d961db358f [NEIGH]: Netlink notifications
Currently neighbour event notifications are limited to update
notifications and only sent if the ARP daemon is enabled. This
patch extends the existing notification code by also reporting
neighbours being removed due to gc or administratively and
removes the dependency on the ARP daemon. This allows to keep
track of neighbour states without periodically fetching the
complete neighbour table.

Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10 16:47:49 -07:00
Thomas Graf
4f494554f9 [NEIGH]: Combine neighbour cleanup and release
Introduces neigh_cleanup_and_release() to be used after a
neighbour has been removed from its neighbour table. Serves
as preparation to add event notifications.

Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10 16:47:48 -07:00
Andrew Gallatin
1e6e9342d4 [MYRI10GE]: Use LRO.
Singed off by: Andrew Gallatin <gallatin@myri.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10 16:47:47 -07:00
Jan-Bernd Themann
d4dc4ec9d8 [EHEA]: Use LRO.
Signed-off-by: Jan-Bernd Themann <themann@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10 16:47:47 -07:00
Jan-Bernd Themann
71c87e0ced [NET]: Generic Large Receive Offload for TCP traffic
This patch provides generic Large Receive Offload (LRO) functionality
for IPv4/TCP traffic.

LRO combines received tcp packets to a single larger tcp packet and
passes them then to the network stack in order to increase performance
(throughput). The interface supports two modes: Drivers can either
pass SKBs or fragment lists to the LRO engine.

Signed-off-by: Jan-Bernd Themann <themann@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10 16:47:46 -07:00
Pavel Emelyanov
e314dbdc1c [NET]: Virtual ethernet device driver.
Veth stands for Virtual ETHernet. It is a simple tunnel driver
that works at the link layer and looks like a pair of ethernet
devices interconnected with each other.

Mainly it allows to communicate between network namespaces but
it can be used as is as well.

The newlink callback is organized that way to make it easy to
create the peer device in the separate namespace when we have
them in kernel.

This implementation uses another interface - the RTM_NRELINK
message introduced by Patric.

Bug fixes from Daniel Lezcano.

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Acked-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10 16:47:46 -07:00
Pavel Emelianov
e71992889e [RTNETLINK]: Introduce generic rtnl_create_link().
This routine gets the parsed rtnl attributes and creates a new
link with generic info (IFLA_LINKINFO policy). Its intention
is to help the drivers, that need to create several links at
once (like VETH).

This is nothing but a copy-paste-ed part of rtnl_newlink() function
that is responsible for creation of new device.

Signed-off-by: Pavel Emelianov <xemul@openvz.org>
Acked-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10 16:47:45 -07:00
Stephen Hemminger
bea3348eef [NET]: Make NAPI polling independent of struct net_device objects.
Several devices have multiple independant RX queues per net
device, and some have a single interrupt doorbell for several
queues.

In either case, it's easier to support layouts like that if the
structure representing the poll is independant from the net
device itself.

The signature of the ->poll() call back goes from:

	int foo_poll(struct net_device *dev, int *budget)

to

	int foo_poll(struct napi_struct *napi, int budget)

The caller is returned the number of RX packets processed (or
the number of "NAPI credits" consumed if you want to get
abstract).  The callee no longer messes around bumping
dev->quota, *budget, etc. because that is all handled in the
caller upon return.

The napi_struct is to be embedded in the device driver private data
structures.

Furthermore, it is the driver's responsibility to disable all NAPI
instances in it's ->stop() device close handler.  Since the
napi_struct is privatized into the driver's private data structures,
only the driver knows how to get at all of the napi_struct instances
it may have per-device.

With lots of help and suggestions from Rusty Russell, Roland Dreier,
Michael Chan, Jeff Garzik, and Jamal Hadi Salim.

Bug fixes from Thomas Graf, Roland Dreier, Peter Zijlstra,
Joseph Fannin, Scott Wood, Hans J. Koch, and Michael Chan.

[ Ported to current tree and all drivers converted.  Integrated
  Stephen's follow-on kerneldoc additions, and restored poll_list
  handling to the old style to fix mutual exclusion issues.  -DaveM ]

Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10 16:47:45 -07:00
Johannes Berg
dde4e47e8f [WIRELESS] radiotap parser: accept all other fields
This makes the radiotap parser accept all other fields that are
currently defined.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10 16:47:43 -07:00
Larry Finger
fe6aa301c7 [MAC80211]: Add SIOCGIWTXPOWER routine
The wireless extensions ioctl's implemented in mac80211 do not include
SIOCGIWTXPOWER. This patch adds the necessary code.

Acked-by: Michael Buesch <mb@bu3sch.de>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10 16:47:42 -07:00
Thomas Graf
744b096e2b [WIRELESS]: Use type safe netlink interface
Makes use of the type safe netlink interface and adds a warning
if the message is too big for NLMSG_DEFAULT_SIZE to help debug.

Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10 16:47:42 -07:00
Johannes Berg
1bec3f1a3e [MAC80211]: fix add_interface monitor mode behaviour
This makes it behave the same whether we have monitor during operation
or not.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Jiri Benc <jbenc@suse.cz>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10 16:47:41 -07:00
Andy Green
9b8a74e348 [MAC80211]: Improve sanity checks on injected packets
Michael Wu noticed that the skb length checking is not taken care of enough when
a packet is presented on the Monitor interface for injection.

This patch improves the sanity checking and removes fake offsets placed
into the skb network and transport header.

Signed-off-by: Andy Green <andy@warmcat.com>
Signed-off-by: Jiri Benc <jbenc@suse.cz>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10 16:47:41 -07:00
Andy Green
dfe6e81dea [MAC80211]: Add get_unaligned to ieee80211_get_radiotap_len
ieee80211_get_radiotap_len() tries to dereference radiotap length without
taking care that it is completely unaligned and get_unaligned()
is required.

Signed-off-by: Andy Green <andy@warmcat.com>
Signed-off-by: Jiri Benc <jbenc@suse.cz>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10 16:47:40 -07:00
Michael Wu
0ec0b7ac3c [MAC80211]: use more GFP_KERNEL instead of GFP_ATOMIC
This patch replaces atomic allocations with regular ones where possible.

Merged with "revert some GFP_ATOMIC -> GFP_KERNEL changes" from Michael Wu:
> Some of the allocations made with GFP_ATOMIC really were necessary.

Signed-off-by: Michael Wu <flamingice@sourmilk.net>
Signed-off-by: Jiri Benc <jbenc@suse.cz>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10 16:47:40 -07:00
Daniel Drake
d9430a3288 [MAC80211]: implement ERP info change notifications
zd1211rw and bcm43xx are interested in being notified when ERP IE conditions
change, so that they can reprogram a register which affects how control frames
are transmitted.

This patch adds an interface similar to the one that can be found in softmac.

Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: Jiri Benc <jbenc@suse.cz>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10 16:47:39 -07:00
Daniel Drake
7e9ed18874 [MAC80211]: improved short preamble handling
Similarly to CTS protection, whether short preambles are used for 802.11b
transmissions should be a per-subif setting, not device global.

For STAs, this patch makes short preamble handling automatic based on the ERP
IE. For APs, hostapd still uses the prism ioctls, but the write ioctl has been
restricted to AP-only subifs.

ieee80211_txrx_data.short_preamble (an unused field) was removed.

Unfortunately, some API changes were required for the following functions:
 - ieee80211_generic_frame_duration
 - ieee80211_rts_duration
 - ieee80211_ctstoself_duration
 - ieee80211_rts_get
 - ieee80211_ctstoself_get
Affected drivers were updated accordingly.

Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: Jiri Benc <jbenc@suse.cz>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10 16:47:38 -07:00
Ivo van Doorn
d5d08def92 [MAC80211]: Add LONG_RETRY flag to ieee80211_tx_control
mac80211 informs the driver what the short and long retry values are through
set_retry_limit(), but when packets are being transmitted it did not inform the
driver which of the 2 retry limits should actually be used.
Instead it sends the actual value, but for drivers that can only set the retry limit
and the register and in the descriptor need to indicate which of the limits should
be used this is not really useful.

This patch will add a IEEE80211_TXCTL_LONG_RETRY_LIMIT flag to the
ieee80211_tx_control structure. By default the short retry limit should be
used but if the flag is set the long retry should be used.

This does not prevent the driver to ignore the request for "no retry" packets,
but at least those will be send out with the short retry limit. But there is no
perfect cure for this problem.. :(

Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: Jiri Benc <jbenc@suse.cz>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10 16:47:38 -07:00
Daniel Drake
8a69aa93d5 [MAC80211]: STA reassociation improvements
My cheapy D-Link AP behaves strangely w.r.t reassociations.

The following sequence of commands causes me to lose association and to be
unable to regain it:

	ifconfig eth8 down
	ifconfig eth8 up
	iwconfig eth8 essid <x>

This is because mac80211 tries to reassociate, rather than just associate.
My AP replies with an association response (not a reassociation response...)
denying the association with code 12: "Association denied due to reason
outside the scope of this standard"

mac80211 tries this reassociation another 4 times or so before finally giving
up.

I see 2 problems here:
 1. bringing the interface down and up again should be resetting interface state
    i.e. after the interface is brought down, it should have no memory of if or
         where it was previously associated
 2. after the first reassociation fails, mac80211 should fall back to
    standard association for the next attempt

Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: Jiri Benc <jbenc@suse.cz>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10 16:47:37 -07:00
Michael Wu
be8755e180 [MAC80211]: improve locking of sta_info related structures
The sta_info code has some awkward locking which prevents some driver
callbacks from being allowed to sleep. This patch makes the locking more
focused so code that calls driver callbacks are allowed to sleep. It also
converts sta_lock to a rwlock.

Signed-off-by: Michael Wu <flamingice@sourmilk.net>
Signed-off-by: Jiri Benc <jbenc@suse.cz>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10 16:47:37 -07:00
Johannes Berg
c2d1560ad8 [MAC80211]: introduce util.c
Introduce a new file util.c and move a whole bunch of functions into it.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Jiri Benc <jbenc@suse.cz>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10 16:47:36 -07:00
Johannes Berg
b2c258fb11 [MAC80211]: reorder interface related functions
This patch groups a whole bunch of functions together to make
ieee80211.c more maintainable.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Jiri Benc <jbenc@suse.cz>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10 16:47:35 -07:00
Johannes Berg
ff68808929 [MAC80211]: move some rate control functions out of ieee80211.c
I think these can go with rate control just as well and it makes
ieee80211.c more readable.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Jiri Benc <jbenc@suse.cz>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10 16:47:35 -07:00
Johannes Berg
1f5a7e47ae [MAC80211]: split out some key functions from ieee80211.c
into a new file key.c which doesn't have much code right now but
it makes ieee80211.c easier to read.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Jiri Benc <jbenc@suse.cz>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10 16:47:34 -07:00
Johannes Berg
75c35aa4e2 [MAC80211]: remove some unnecessary includes
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Jiri Benc <jbenc@suse.cz>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10 16:47:34 -07:00