On an SMP system the kgdb_single_step flag has the possibility to
indefinitely hang the system in the case. Consider the case where,
CPU 1 has the schedule lock and CPU 0 is set to single step, there is
no way for CPU 0 to run another task.
The easy way to observe the problem is to make 2 cpus busy, and run
the kgdb test suite. You will see that it hangs the system very
quickly.
while [ 1 ] ; do find /proc > /dev/null 2>&1 ; done &
while [ 1 ] ; do find /proc > /dev/null 2>&1 ; done &
echo V1 > /sys/module/kgdbts/parameters/kgdbts
The side effect of this patch is that there is the possibility
to miss a breakpoint in the case that a single step operation
was executed to step over a breakpoint in common code.
The trade off of the missed breakpoint is preferred to
hanging the kernel. This can be fixed in the future by
using kprobes or another strategy to step over planted
breakpoints with out of line execution.
CC: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
It is possible for the user_mode_vm(regs) check to return true on the
i368 arch for a non master kgdb cpu or when the master kgdb cpu
handles the NMI watch dog exception.
The solution is simply to select the correct gdb_ss location
based on the check to user_mode_vm(regs).
CC: Ingo Molnar <mingo@elte.hu>
Acked-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
The for loop starts with a breakno of 0, and ends when it's 4. so
this test is always true.
Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
New helper - sys_mmap_pgoff(); switch syscalls to using it.
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Jens found the following crash/regression:
[ 0.000000] found SMP MP-table at [ffff8800000fdd80] fdd80
[ 0.000000] Kernel panic - not syncing: Overlapping early reservations 12-f011 MP-table mpc to 0-fff BIOS data page
and
[ 0.000000] Kernel panic - not syncing: Overlapping early reservations 12-f011 MP-table mpc to 6000-7fff TRAMPOLINE
and bisected it to b24c2a9 ("x86: Move find_smp_config()
earlier and avoid bootmem usage").
It turns out the BIOS is using the first 64k for mptable,
without reserving it.
So try to find good range for the real-mode trampoline instead of
hard coding it, in case some bios tries to use that range for sth.
Reported-by: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Tested-by: Jens Axboe <jens.axboe@oracle.com>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
LKML-Reference: <4B21630A.6000308@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The per_cpu cpuid4_info shared_map can contain stale data when CPUs are added
and removed.
The stale data can lead to a NULL pointer derefernce panic on a remove of a
CPU that has had siblings previously removed.
This patch resolves the panic by verifying a cpu is actually online before
adding it to the shared_cpu_map, only examining cpus that are part of
the same lower level cache, and by updating other siblings lowest level cache
maps when a cpu is added.
Signed-off-by: Prarit Bhargava <prarit@redhat.com>
LKML-Reference: <20091209183336.17855.98708.sendpatchset@prarit.bos.redhat.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Brian Gerst <brgerst@gmail.com>
LKML-Reference: <1260380084-3707-6-git-send-email-brgerst@gmail.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Brian Gerst <brgerst@gmail.com>
LKML-Reference: <1260380084-3707-5-git-send-email-brgerst@gmail.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
The arg should be in %eax, but that is clobbered by the return value
of clone. The function pointer can be in any register. Also, don't
push args onto the stack, since regparm(3) is the normal calling
convention now.
Signed-off-by: Brian Gerst <brgerst@gmail.com>
LKML-Reference: <1260380084-3707-4-git-send-email-brgerst@gmail.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Use user_mode() instead of a magic value for sp to determine when returning
to kernel mode.
Signed-off-by: Brian Gerst <brgerst@gmail.com>
LKML-Reference: <1260380084-3707-3-git-send-email-brgerst@gmail.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Prepare for merging with 32-bit.
Signed-off-by: Brian Gerst <brgerst@gmail.com>
LKML-Reference: <1260380084-3707-2-git-send-email-brgerst@gmail.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
* 'bugfix' of git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen:
xen: try harder to balloon up under memory pressure.
Xen balloon: fix totalram_pages counting.
xen: explicitly create/destroy stop_machine workqueues outside suspend/resume region.
xen: improve error handling in do_suspend.
xen: don't leak IRQs over suspend/resume.
xen: call clock resume notifier on all CPUs
xen: use iret for return from 64b kernel to 32b usermode
xen: don't call dpm_resume_noirq() with interrupts disabled.
xen: register runstate info for boot CPU early
xen: register runstate on secondary CPUs
xen: register timer interrupt with IRQF_TIMER
xen: correctly restore pfn_to_mfn_list_list after resume
xen: restore runstate_info even if !have_vcpu_info_placement
xen: re-register runstate area earlier on resume.
xen: wait up to 5 minutes for device connetion
xen: improvement to wait_for_devices()
xen: fix is_disconnected_device/exists_disconnected_device
xen/xenbus: make DEVICE_ATTR()s static
While Linux provided an O_SYNC flag basically since day 1, it took until
Linux 2.4.0-test12pre2 to actually get it implemented for filesystems,
since that day we had generic_osync_around with only minor changes and the
great "For now, when the user asks for O_SYNC, we'll actually give
O_DSYNC" comment. This patch intends to actually give us real O_SYNC
semantics in addition to the O_DSYNC semantics. After Jan's O_SYNC
patches which are required before this patch it's actually surprisingly
simple, we just need to figure out when to set the datasync flag to
vfs_fsync_range and when not.
This patch renames the existing O_SYNC flag to O_DSYNC while keeping it's
numerical value to keep binary compatibility, and adds a new real O_SYNC
flag. To guarantee backwards compatiblity it is defined as expanding to
both the O_DSYNC and the new additional binary flag (__O_SYNC) to make
sure we are backwards-compatible when compiled against the new headers.
This also means that all places that don't care about the differences can
just check O_DSYNC and get the right behaviour for O_SYNC, too - only
places that actuall care need to check __O_SYNC in addition. Drivers and
network filesystems have been updated in a fail safe way to always do the
full sync magic if O_DSYNC is set. The few places setting O_SYNC for
lower layers are kept that way for now to stay failsafe.
We enforce that O_DSYNC is set when __O_SYNC is set early in the open path
to make sure we always get these sane options.
Note that parisc really screwed up their headers as they already define a
O_DSYNC that has always been a no-op. We try to repair it by using it for
the new O_DSYNC and redefinining O_SYNC to send both the traditional
O_SYNC numerical value _and_ the O_DSYNC one.
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Grant Grundler <grundler@parisc-linux.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andreas Dilger <adilger@sun.com>
Acked-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Acked-by: Kyle McMartin <kyle@mcmartin.ca>
Acked-by: Ulrich Drepper <drepper@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jan Kara <jack@suse.cz>
The device change notifier is initialized in the dma_ops
initialization path. But this path is never executed for
iommu=pt. Move the notifier initialization to IOMMU hardware
init code to fix this.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
The data structure changes to use dev->archdata.iommu field
broke the iommu=pt mode because in this case the
dev->archdata.iommu was left uninitialized. This moves the
inititalization of the devices into the main init function
and fixes the problem.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
* 'acpica' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6:
ACPICA: Update version to 20091112.
ACPICA: Add additional module-level code support
ACPICA: Deploy new create integer interface where appropriate
ACPICA: New internal utility function to create Integer objects
ACPICA: Add repair for predefined methods that must return sorted lists
ACPICA: Fix possible fault if return Package objects contain NULL elements
ACPICA: Add post-order callback to acpi_walk_namespace
ACPICA: Change package length error message to an info message
ACPICA: Reduce severity of predefined repair messages, Warning to Info
ACPICA: Update version to 20091013
ACPICA: Fix possible memory leak for Scope ASL operator
ACPICA: Remove possibility of executing _REG methods twice
ACPICA: Add repair for bad _MAT buffers
ACPICA: Add repair for bad _BIF/_BIX packages
set_iopl_mask() is a no-op on 64 bits, but it is also a paravirt hook,
so call it even on 64 bits.
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Cc: Brian Gerst <brgerst@gmail.com>
LKML-Reference: <1260403316-5679-3-git-send-email-brgerst@gmail.com>
In the PTREGSCALL1 and 2 macros, we can trivially avoid an unnecessary
pipeline serialization, so do so.
In PTREGSCALLS3 this is much less clear-cut since we have to push a
new value to the stack. Leave it alone for now assuming it is as good
as it is going to be; may want to check on Atom or another in-order
x86 to see if we can do better.
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Cc: Brian Gerst <brgerst@gmail.com>
LKML-Reference: <1260403316-5679-2-git-send-email-brgerst@gmail.com>
Change 32-bit sys_clone to new PTREGSCALL stub, and merge with 64-bit.
Signed-off-by: Brian Gerst <brgerst@gmail.com>
LKML-Reference: <1260403316-5679-7-git-send-email-brgerst@gmail.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Convert these to new PTREGSCALL stubs.
Signed-off-by: Brian Gerst <brgerst@gmail.com>
LKML-Reference: <1260403316-5679-6-git-send-email-brgerst@gmail.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Change 32-bit sys_sigaltstack to PTREGSCALL2, and merge with 64-bit.
Signed-off-by: Brian Gerst <brgerst@gmail.com>
LKML-Reference: <1260403316-5679-5-git-send-email-brgerst@gmail.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Change 32-bit sys_execve to PTREGSCALL3, and merge with 64-bit.
Signed-off-by: Brian Gerst <brgerst@gmail.com>
LKML-Reference: <1260403316-5679-4-git-send-email-brgerst@gmail.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Change 32-bit sys_iopl to PTREGSCALL1, and merge with 64-bit.
Signed-off-by: Brian Gerst <brgerst@gmail.com>
LKML-Reference: <1260403316-5679-3-git-send-email-brgerst@gmail.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Add new stubs which add the pt_regs pointer as the last arg, matching
64-bit. This will allow these syscalls to be easily merged.
Signed-off-by: Brian Gerst <brgerst@gmail.com>
LKML-Reference: <1260403316-5679-2-git-send-email-brgerst@gmail.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Robert Hancock observes that DMI_BOARD_NAME is often more useful
than DMI_PRODUCT_NAME, especially on standalone motherboards.
So, print both.
Signed-off-by: Andy Isaacson <adi@hexapodia.org>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Robert Hancock <hancockrwd@gmail.com>
Cc: Richard Zidlicky <rz@linux-m68k.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
LKML-Reference: <20091208083021.GB27174@hexapodia.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Unify x86_32 and x86_64 implementations of __show_regs() header,
standardizing on the x86_64 format string in the process. Also,
32-bit will now call print_modules.
Signed-off-by: Andy Isaacson <adi@hexapodia.org>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Robert Hancock <hancockrwd@gmail.com>
Cc: Richard Zidlicky <rz@linux-m68k.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
LKML-Reference: <20091208082942.GA27174@hexapodia.org>
[ v2: resolved conflict ]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Currently, when ptrace needs to modify a breakpoint, like disabling
it, changing its address, type or len, it calls
modify_user_hw_breakpoint(). This latter will perform the heavy and
racy task of unregistering the old breakpoint and registering a new
one.
This is racy as someone else might steal the reserved breakpoint
slot under us, which is undesired as the breakpoint is only
supposed to be modified, sometimes in the middle of a debugging
workflow. We don't want our slot to be stolen in the middle.
So instead of unregistering/registering the breakpoint, just
disable it while we modify its breakpoint fields and re-enable it
after if necessary.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Prasad <prasad@linux.vnet.ibm.com>
LKML-Reference: <1260347148-5519-1-git-send-regression-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
- Use #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
- Remove "microcode: " prefix from each pr_<level>
- Fix duplicated KERN_ERR prefix
- Coalesce pr_<level> format strings
- Add a space after an exclamation point
No other change in output.
Signed-off-by: Joe Perches <joe@perches.com>
Cc: Andy Whitcroft <apw@canonical.com>
Cc: Andreas Herrmann <herrmann.der.user@googlemail.com>
LKML-Reference: <1260340250.27677.191.camel@Joe-Laptop.home>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
* 'timers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
timers, init: Limit the number of per cpu calibration bootup messages
posix-cpu-timers: optimize and document timer_create callback
clockevents: Add missing include to pacify sparse
x86: vmiclock: Fix printk format
x86: Fix printk format due to variable type change
sparc: fix printk for change of variable type
clocksource/events: Fix fallout of generic code changes
nohz: Allow 32-bit machines to sleep for more than 2.15 seconds
nohz: Track last do_timer() cpu
nohz: Prevent clocksource wrapping during idle
nohz: Type cast printk argument
mips: Use generic mult/shift factor calculation for clocks
clocksource: Provide a generic mult/shift factor calculation
clockevents: Use u32 for mult and shift factors
nohz: Introduce arch_needs_cpu
nohz: Reuse ktime in sub-functions of tick_check_idle.
time: Remove xtime_cache
time: Implement logarithmic time accumulation
* 'timers-for-linus-hpet' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
x86: hpet: Make WARN_ON understandable
x86: arch specific support for remapping HPET MSIs
intr-remap: generic support for remapping HPET MSIs
x86, hpet: Simplify the HPET code
x86, hpet: Disable per-cpu hpet timer if ARAT is supported
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
hwrng: core - Prevent too-small buffer sizes
hwrng: virtio-rng - Convert to new API
hwrng: core - Replace u32 in driver API with byte array
crypto: ansi_cprng - Move FIPS functions under CONFIG_CRYPTO_FIPS
crypto: testmgr - Add ghash algorithm test before provide to users
crypto: ghash-clmulni-intel - Put proper .data section in place
crypto: ghash-clmulni-intel - Use gas macro for PCLMULQDQ-NI and PSHUFB
crypto: aesni-intel - Use gas macro for AES-NI instructions
x86: Generate .byte code for some new instructions via gas macro
crypto: ghash-intel - Fix irq_fpu_usable usage
crypto: ghash-intel - Add PSHUFB macros
crypto: ghash-intel - Hard-code pshufb
crypto: ghash-intel - Fix building failure on x86_32
crypto: testmgr - Fix warning
crypto: ansi_cprng - Fix test in get_prng_bytes
crypto: hash - Remove cra_u.{digest,hash}
crypto: api - Remove digest case from procfs show handler
crypto: hash - Remove legacy hash/digest code
crypto: ansi_cprng - Add FIPS wrapper
crypto: ghash - Add PCLMULQDQ accelerated implementation
* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
x86, mce: don't restart timer if disabled
x86: Use -maccumulate-outgoing-args for sane mcount prologues
x86: Prevent GCC 4.4.x (pentium-mmx et al) function prologue wreckage
x86: AMD Northbridge: Verify NB's node is online
x86 VSDO: Fix Kconfig help
x86: Fix typo in Intel CPU cache size descriptor
x86: Add new Intel CPU cache size descriptors
* 'x86-setup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
vgacon: Add support for setting the default cursor state
vc: Add support for hiding the cursor when creating VTs
x86, setup: Store the boot cursor state
* 'x86-reboot-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
x86/reboot: Add pci_dev_put in reboot_fixup_32.c for consistency
* 'x86-process-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
x86-64: merge the standard and compat start_thread() functions
x86-64: make compat_start_thread() match start_thread()
* 'x86-pat-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
x86: pat: Remove ioremap_default()
x86: pat: Clean up req_type special case for reserve_memtype()
x86: Relegate CONFIG_PAT and CONFIG_MTRR configurability to EMBEDDED
* 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (36 commits)
x86, mm: Correct the implementation of is_untracked_pat_range()
x86/pat: Trivial: don't create debugfs for memtype if pat is disabled
x86, mtrr: Fix sorting of mtrr after subtracting
x86: Move find_smp_config() earlier and avoid bootmem usage
x86, platform: Change is_untracked_pat_range() to bool; cleanup init
x86: Change is_ISA_range() into an inline function
x86, mm: is_untracked_pat_range() takes a normal semiclosed range
x86, mm: Call is_untracked_pat_range() rather than is_ISA_range()
x86: UV SGI: Don't track GRU space in PAT
x86: SGI UV: Fix BAU initialization
x86, numa: Use near(er) online node instead of roundrobin for NUMA
x86, numa, bootmem: Only free bootmem on NUMA failure path
x86: Change crash kernel to reserve via reserve_early()
x86: Eliminate redundant/contradicting cache line size config options
x86: When cleaning MTRRs, do not fold WP into UC
x86: remove "extern" from function prototypes in <asm/proto.h>
x86, mm: Report state of NX protections during boot
x86, mm: Clean up and simplify NX enablement
x86, pageattr: Make set_memory_(x|nx) aware of NX support
x86, sleep: Always save the value of EFER
...
Fix up conflicts (added both iommu_shutdown and is_untracked_pat_range)
to 'struct x86_platform_ops') in
arch/x86/include/asm/x86_init.h
arch/x86/kernel/x86_init.c
* 'x86-microcode-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
x86: ucode-amd: Move family check to microcde_amd.c's init function
x86, ucode-amd: Ensure ucode update on suspend/resume after CPU off/online cycle
x86: ucode-amd: Convert printk(KERN_*...) to pr_*(...)
x86: ucode-amd: Don't warn when no ucode is available for a CPU revision
x86: ucode-amd: Load ucode-patches once and not separately of each CPU
x86, amd-ucode: Remove needless log messages
Commit cebe182033 had an unnecessary,
wrong change: &mce_banks[i].attr is equivalent to the former
bank_attrs[i], not to mce_attrs[i].
Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Acked-by: Andi Kleen <andi@firstfloor.org>
LKML-Reference: <4B1E05CC.4040703@jp.fujitsu.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
* 'for-2.6.33' of git://git.kernel.dk/linux-2.6-block: (113 commits)
cfq-iosched: Do not access cfqq after freeing it
block: include linux/err.h to use ERR_PTR
cfq-iosched: use call_rcu() instead of doing grace period stall on queue exit
blkio: Allow CFQ group IO scheduling even when CFQ is a module
blkio: Implement dynamic io controlling policy registration
blkio: Export some symbols from blkio as its user CFQ can be a module
block: Fix io_context leak after failure of clone with CLONE_IO
block: Fix io_context leak after clone with CLONE_IO
cfq-iosched: make nonrot check logic consistent
io controller: quick fix for blk-cgroup and modular CFQ
cfq-iosched: move IO controller declerations to a header file
cfq-iosched: fix compile problem with !CONFIG_CGROUP
blkio: Documentation
blkio: Wait on sync-noidle queue even if rq_noidle = 1
blkio: Implement group_isolation tunable
blkio: Determine async workload length based on total number of queues
blkio: Wait for cfq queue to get backlogged if group is empty
blkio: Propagate cgroup weight updation to cfq groups
blkio: Drop the reference to queue once the task changes cgroup
blkio: Provide some isolation between groups
...
* 'kvm-updates/2.6.33' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (84 commits)
KVM: VMX: Fix comparison of guest efer with stale host value
KVM: s390: Fix prefix register checking in arch/s390/kvm/sigp.c
KVM: Drop user return notifier when disabling virtualization on a cpu
KVM: VMX: Disable unrestricted guest when EPT disabled
KVM: x86 emulator: limit instructions to 15 bytes
KVM: s390: Make psw available on all exits, not just a subset
KVM: x86: Add KVM_GET/SET_VCPU_EVENTS
KVM: VMX: Report unexpected simultaneous exceptions as internal errors
KVM: Allow internal errors reported to userspace to carry extra data
KVM: Reorder IOCTLs in main kvm.h
KVM: x86: Polish exception injection via KVM_SET_GUEST_DEBUG
KVM: only clear irq_source_id if irqchip is present
KVM: x86: disallow KVM_{SET,GET}_LAPIC without allocated in-kernel lapic
KVM: x86: disallow multiple KVM_CREATE_IRQCHIP
KVM: VMX: Remove vmx->msr_offset_efer
KVM: MMU: update invlpg handler comment
KVM: VMX: move CR3/PDPTR update to vmx_set_cr3
KVM: remove duplicated task_switch check
KVM: powerpc: Fix BUILD_BUG_ON condition
KVM: VMX: Use shared msr infrastructure
...
Trivial conflicts due to new Kconfig options in arch/Kconfig and kernel/Makefile
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1815 commits)
mac80211: fix reorder buffer release
iwmc3200wifi: Enable wimax core through module parameter
iwmc3200wifi: Add wifi-wimax coexistence mode as a module parameter
iwmc3200wifi: Coex table command does not expect a response
iwmc3200wifi: Update wiwi priority table
iwlwifi: driver version track kernel version
iwlwifi: indicate uCode type when fail dump error/event log
iwl3945: remove duplicated event logging code
b43: fix two warnings
ipw2100: fix rebooting hang with driver loaded
cfg80211: indent regulatory messages with spaces
iwmc3200wifi: fix NULL pointer dereference in pmkid update
mac80211: Fix TX status reporting for injected data frames
ath9k: enable 2GHz band only if the device supports it
airo: Fix integer overflow warning
rt2x00: Fix padding bug on L2PAD devices.
WE: Fix set events not propagated
b43legacy: avoid PPC fault during resume
b43: avoid PPC fault during resume
tcp: fix a timewait refcnt race
...
Fix up conflicts due to sysctl cleanups (dead sysctl_check code and
CTL_UNNUMBERED removed) in
kernel/sysctl_check.c
net/ipv4/sysctl_net_ipv4.c
net/ipv6/addrconf.c
net/sctp/sysctl.c
* git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/sysctl-2.6: (43 commits)
security/tomoyo: Remove now unnecessary handling of security_sysctl.
security/tomoyo: Add a special case to handle accesses through the internal proc mount.
sysctl: Drop & in front of every proc_handler.
sysctl: Remove CTL_NONE and CTL_UNNUMBERED
sysctl: kill dead ctl_handler definitions.
sysctl: Remove the last of the generic binary sysctl support
sysctl net: Remove unused binary sysctl code
sysctl security/tomoyo: Don't look at ctl_name
sysctl arm: Remove binary sysctl support
sysctl x86: Remove dead binary sysctl support
sysctl sh: Remove dead binary sysctl support
sysctl powerpc: Remove dead binary sysctl support
sysctl ia64: Remove dead binary sysctl support
sysctl s390: Remove dead sysctl binary support
sysctl frv: Remove dead binary sysctl support
sysctl mips/lasat: Remove dead binary sysctl support
sysctl drivers: Remove dead binary sysctl support
sysctl crypto: Remove dead binary sysctl support
sysctl security/keys: Remove dead binary sysctl support
sysctl kernel: Remove binary sysctl logic
...
mce_timer must be passed to setup_timer() in all cases, no
matter whether it is going to be actually used. Otherwise, when
the CPU gets brought down, its call to del_timer_sync() will
never return, as the timer won't have a base associated, and
hence lock_timer_base() will loop infinitely.
Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Cc: <stable@kernel.org>
LKML-Reference: <4B1DB831.2030801@jp.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Delete empty or incomplete inat-tables.c if gen-insn-attr-x86.awk
failed, because it causes a build error if user tries to build
kernel next time.
Reported-by: Arkadiusz Miskiewicz <arekm@maven.pl>
Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Cc: systemtap <systemtap@sources.redhat.com>
Cc: DLE <dle-develop@lists.sourceforge.net>
Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20091207170033.19230.37688.stgit@dhcp-100-2-132.bos.redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
apic_noop is used to provide dummy apic functions. It's installed
when the CPU has no APIC or when the APIC is disabled on the kernel
command line.
The apic_noop implementation of apic_write() warns when the CPU has
an APIC or when the APIC is not disabled.
That's bogus. The warning should only happen when the CPU has an
APIC _AND_ the APIC is not disabled. apic_noop.apic_read() has the
correct check.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: <stable@kernel.org> # in <= .32 this typo resides in native_apic_write_dummy()
LKML-Reference: <alpine.LFD.2.00.0912071255420.3089@localhost.localdomain>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
At least, insn.c and inat.c is needed for kprobe for now. So,
this compile those only if KPROBES is enabled.
Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Cc: Masami Hiramatsu <mhiramat@redhat.com>
LKML-Reference: <878wdg8icq.fsf@devron.myhome.or.jp>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Fix the following warning:
arch/x86/tools/test_get_len.c: In function "main":
arch/x86/tools/test_get_len.c:116: warning: unused variable "c"
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Masami Hiramatsu <mhiramat@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
When we enter in irq, two things can happen to preserve the link
to the previous frame pointer:
- If we were in an irq already, we don't switch to the irq stack
as we are inside. We just need to save the previous frame
pointer and to link the new one to the previous.
- Otherwise we need another level of indirection. We enter the irq with
the previous stack. We save the previous bp inside and make bp
pointing to its saved address. Then we switch to the irq stack and
push bp another time but to the new stack. This makes two levels to
dereference instead of one.
In the second case, the current stacktrace code omits the second level
and loses the frame pointer accuracy. The stack that follows will then
be considered as unreliable.
Handling that makes the perf callchain happier.
Before:
43.94% [k] _raw_read_lock
|
--- _read_lock
|
|--60.53%-- send_sigio
| __kill_fasync
| kill_fasync
| evdev_pass_event
| evdev_event
| input_pass_event
| input_handle_event
| input_event
| synaptics_process_byte
| psmouse_handle_byte
| psmouse_interrupt
| serio_interrupt
| i8042_interrupt
| handle_IRQ_event
| handle_edge_irq
| handle_irq
| __irqentry_text_start
| ret_from_intr
| |
| |--30.43%-- __select
| |
| |--17.39%-- 0x454f15
| |
| |--13.04%-- __read
| |
| |--13.04%-- vread_hpet
| |
| |--13.04%-- _xcb_lock_io
| |
| --13.04%-- 0x7f630878ce8
After:
50.00% [k] _raw_read_lock
|
--- _read_lock
|
|--98.97%-- send_sigio
| __kill_fasync
| kill_fasync
| evdev_pass_event
| evdev_event
| input_pass_event
| input_handle_event
| input_event
| |
| |--96.88%-- synaptics_process_byte
| | psmouse_handle_byte
| | psmouse_interrupt
| | serio_interrupt
| | i8042_interrupt
| | handle_IRQ_event
| | handle_edge_irq
| | handle_irq
| | __irqentry_text_start
| | ret_from_intr
| | |
| | |--39.78%-- __const_udelay
| | | |
| | | |--91.89%-- ath5k_hw_register_timeout
| | | | ath5k_hw_noise_floor_calibration
| | | | ath5k_hw_reset
| | | | ath5k_reset
| | | | ath5k_config
| | | | ieee80211_hw_config
| | | | |
| | | | |--88.24%-- ieee80211_scan_work
| | | | | worker_thread
| | | | | kthread
| | | | | child_rip
| | | | |
| | | | --11.76%-- ieee80211_scan_completed
| | | | ieee80211_scan_work
| | | | worker_thread
| | | | kthread
| | | | child_rip
| | | |
| | | --8.11%-- ath5k_hw_noise_floor_calibration
| | | ath5k_hw_reset
| | | ath5k_reset
| | | ath5k_config
Note: This does not only affect perf events but also x86-64
stacktraces. They were considered as unreliable once we quit
the irq stack frame.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: "K. Prasad" <prasad@linux.vnet.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
While dumping a stacktrace, the end of the exception stack won't link
the frame pointer to the previous stack.
The interrupted stack will then be considered as unreliable and ignored
by perf, as the frame pointer is unreliable itself.
This happens because we overwrite the frame pointer that links to the
interrupted frame with the address of the exception stack. This is
done in order to reserve space inside.
But rbp has been chosen here only because it is not a scratch register,
so that the address of the exception stack remains in rbp after calling
do_debug(), we can then release the exception stack space without the
need to retrieve its address again.
But we can pick another non-scratch register to do that, so that we
preserve the link to the interrupted stack frame in the stacktraces.
Just randomly choose r12. Every registers are saved just before and
restored just after calling do_debug(). And r12 is not used in the
middle, which makes it a perfect candidate.
Example: perf record -g -a -c 1 -f -e mem:$(tasklist_lock_addr):rw
Before:
44.18% [k] _raw_read_lock
|
|
--- |--6.31%-- waitid
|
|--4.26%-- writev
|
|--3.63%-- __select
|
|--3.15%-- __waitpid
| |
| |--28.57%-- 0x8b52e00000139f
| |
| |--28.57%-- 0x8b52e0000013c6
| |
| |--14.29%-- 0x7fde786dc000
| |
| |--14.29%-- 0x62696c2f7273752f
| |
| --14.29%-- 0x1ea9df800000000
|
|--3.00%-- __poll
After:
43.94% [k] _raw_read_lock
|
--- _read_lock
|
|--60.53%-- send_sigio
| __kill_fasync
| kill_fasync
| evdev_pass_event
| evdev_event
| input_pass_event
| input_handle_event
| input_event
| synaptics_process_byte
| psmouse_handle_byte
| psmouse_interrupt
| serio_interrupt
| i8042_interrupt
| handle_IRQ_event
| handle_edge_irq
| handle_irq
| __irqentry_text_start
| ret_from_intr
| |
| |--30.43%-- __select
| |
| |--17.39%-- 0x454f15
| |
| |--13.04%-- __read
| |
| |--13.04%-- vread_hpet
| |
| |--13.04%-- _xcb_lock_io
| |
| --13.04%-- 0x7f630878ce87
Note: it does not only affect perf events but also other stacktraces in
x86-64. They were considered as unreliable once we quit the debug
stack frame.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: "K. Prasad" <prasad@linux.vnet.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Dumping the callchains from breakpoint events with perf gives strange
results:
3.75% perf [kernel] [k] _raw_read_unlock
|
--- _raw_read_unlock
perf_callchain
perf_prepare_sample
__perf_event_overflow
perf_swevent_overflow
perf_swevent_add
perf_bp_event
hw_breakpoint_exceptions_notify
notifier_call_chain
__atomic_notifier_call_chain
atomic_notifier_call_chain
notify_die
do_debug
debug
munmap
We are infected with all the debug stack. Like the nmi stack, the debug
stack is undesired as it is part of the profiling path, not helpful for
the user.
Ignore it.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: "K. Prasad" <prasad@linux.vnet.ibm.com>
struct perf_event::event callback was called when a breakpoint
triggers. But this is a rather opaque callback, pretty
tied-only to the breakpoint API and not really integrated into perf
as it triggers even when we don't overflow.
We prefer to use overflow_handler() as it fits into the perf events
rules, being called only when we overflow.
Reported-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: "K. Prasad" <prasad@linux.vnet.ibm.com>
Drop the callback and task parameters from modify_user_hw_breakpoint().
For now we have no user that need to modify a breakpoint to the point
of changing its handler or its task context.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: "K. Prasad" <prasad@linux.vnet.ibm.com>
* 'x86-debug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
x86: Limit number of per cpu TSC sync messages
x86: dumpstack, 64-bit: Disable preemption when walking the IRQ/exception stacks
x86: dumpstack: Clean up the x86_stack_ids[][] initalization and other details
x86, cpu: mv display_cacheinfo -> cpu_detect_cache_sizes
x86: Suppress stack overrun message for init_task
x86: Fix cpu_devs[] initialization in early_cpu_init()
x86: Remove CPU cache size output for non-Intel too
x86: Minimise printk spew from per-vendor init code
x86: Remove the CPU cache size printk's
cpumask: Avoid cpumask_t in arch/x86/kernel/apic/nmi.c
x86: Make sure we also print a Code: line for show_regs()
* 'x86-cpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
x86, msr, cpumask: Use struct cpumask rather than the deprecated cpumask_t
x86, cpuid: Simplify the code in cpuid_open
x86, cpuid: Remove the bkl from cpuid_open()
x86, msr: Remove the bkl from msr_open()
x86: AMD Geode LX optimizations
x86, msr: Unify rdmsr_on_cpus/wrmsr_on_cpus
* 'x86-cleanups-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
x86: Fix a section mismatch in arch/x86/kernel/setup.c
x86: Fixup last users of irq_chip->typename
x86: Remove BKL from apm_32
x86: Remove BKL from microcode
x86: use kernel_stack_pointer() in kprobes.c
x86: use kernel_stack_pointer() in kgdb.c
x86: use kernel_stack_pointer() in dumpstack.c
x86: use kernel_stack_pointer() in process_32.c
* 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
include/linux/compiler-gcc4.h: Fix build bug - gcc-4.0.2 doesn't understand __builtin_object_size
x86/alternatives: No need for alternatives-asm.h to re-invent stuff already in asm.h
x86/alternatives: Check replacementlen <= instrlen at build time
x86, 64-bit: Set data segments to null after switching to 64-bit mode
x86: Clean up the loadsegment() macro
x86: Optimize loadsegment()
x86: Add missing might_fault() checks to copy_{to,from}_user()
x86-64: __copy_from_user_inatomic() adjustments
x86: Remove unused thread_return label from switch_to()
x86, 64-bit: Fix bstep_iret jump
x86: Don't use the strict copy checks when branch profiling is in use
x86, 64-bit: Move K8 B step iret fixup to fault entry asm
x86: Generate cmpxchg build failures
x86: Add a Kconfig option to turn the copy_from_user warnings into errors
x86: Turn the copy_from_user check into an (optional) compile time warning
x86: Use __builtin_memset and __builtin_memcpy for memset/memcpy
x86: Use __builtin_object_size() to validate the buffer size for copy_from_user()
* 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (30 commits)
x86, apic: Enable lapic nmi watchdog on AMD Family 11h
x86: Remove unnecessary mdelay() from cpu_disable_common()
x86, ioapic: Document another case when level irq is seen as an edge
x86, ioapic: Fix the EOI register detection mechanism
x86, io-apic: Move the effort of clearing remoteIRR explicitly before migrating the irq
x86: SGI UV: Map low MMR ranges
x86: apic: Print out SRAT table APIC id in hex
x86: Re-get cfg_new in case reuse/move irq_desc
x86: apic: Remove not needed #ifdef
x86: io-apic: IO-APIC MMIO should not fail on resource insertion
x86: Remove asm/apicnum.h
x86: apic: Do not use stacked physid_mask_t
x86, apic: Get rid of apicid_to_cpu_present assign on 64-bit
x86, ioapic: Use snrpintf while set names for IO-APIC resourses
x86, apic: Use PAGE_SIZE instead of numbers
x86: Remove local_irq_enable()/local_irq_disable() in fixup_irqs()
x86: Use EOI register in io-apic on intel platforms
x86: Force irq complete move during cpu offline
x86: Remove move_cleanup_count from irq_cfg
x86, intr-remap: Avoid irq_chip mask/unmask in fixup_irqs() for intr-remapping
...
* 'tracing-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (40 commits)
tracing: Separate raw syscall from syscall tracer
ring-buffer-benchmark: Add parameters to set produce/consumer priorities
tracing, function tracer: Clean up strstrip() usage
ring-buffer benchmark: Run producer/consumer threads at nice +19
tracing: Remove the stale include/trace/power.h
tracing: Only print objcopy version warning once from recordmcount
tracing: Prevent build warning: 'ftrace_graph_buf' defined but not used
ring-buffer: Move access to commit_page up into function used
tracing: do not disable interrupts for trace_clock_local
ring-buffer: Add multiple iterations between benchmark timestamps
kprobes: Sanitize struct kretprobe_instance allocations
tracing: Fix to use __always_unused attribute
compiler: Introduce __always_unused
tracing: Exit with error if a weak function is used in recordmcount.pl
tracing: Move conditional into update_funcs() in recordmcount.pl
tracing: Add regex for weak functions in recordmcount.pl
tracing: Move mcount section search to front of loop in recordmcount.pl
tracing: Fix objcopy revision check in recordmcount.pl
tracing: Check absolute path of input file in recordmcount.pl
tracing: Correct the check for number of arguments in recordmcount.pl
...
* 'core-iommu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (63 commits)
x86, Calgary IOMMU quirk: Find nearest matching Calgary while walking up the PCI tree
x86/amd-iommu: Remove amd_iommu_pd_table
x86/amd-iommu: Move reset_iommu_command_buffer out of locked code
x86/amd-iommu: Cleanup DTE flushing code
x86/amd-iommu: Introduce iommu_flush_device() function
x86/amd-iommu: Cleanup attach/detach_device code
x86/amd-iommu: Keep devices per domain in a list
x86/amd-iommu: Add device bind reference counting
x86/amd-iommu: Use dev->arch->iommu to store iommu related information
x86/amd-iommu: Remove support for domain sharing
x86/amd-iommu: Rearrange dma_ops related functions
x86/amd-iommu: Move some pte allocation functions in the right section
x86/amd-iommu: Remove iommu parameter from dma_ops_domain_alloc
x86/amd-iommu: Use get_device_id and check_device where appropriate
x86/amd-iommu: Move find_protection_domain to helper functions
x86/amd-iommu: Simplify get_device_resources()
x86/amd-iommu: Let domain_for_device handle aliases
x86/amd-iommu: Remove iommu specific handling from dma_ops path
x86/amd-iommu: Remove iommu parameter from __(un)map_single
x86/amd-iommu: Make alloc_new_range aware of multiple IOMMUs
...
Use the new unreachable() macro instead of for(;;);. When
allyesconfig is built with a GCC-4.5 snapshot on i686 the size of the
text segment is reduced by 3987 bytes (from 6827019 to 6823032).
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Acked-by: "H. Peter Anvin" <hpa@zytor.com>
CC: Thomas Gleixner <tglx@linutronix.de>
CC: Ingo Molnar <mingo@redhat.com>
CC: x86@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Bug reporter noted their system with an ASUS P4S800 motherboard would
hang when rebooting unless reboot=b was specified. Their dmidecode
didn't contain descriptive System Information for Manufacturer or
Product Name, so I used their Base Board Information to create a
reboot quirk patch. The bug reporter confirmed this patch resolves
the reboot hang.
Handle 0x0001, DMI type 1, 25 bytes
System Information
Manufacturer: System Manufacturer
Product Name: System Name
Version: System Version
Serial Number: SYS-1234567890
UUID: E0BFCD8B-7948-D911-A953-E486B4EEB67F
Wake-up Type: Power Switch
Handle 0x0002, DMI type 2, 8 bytes
Base Board Information
Manufacturer: ASUSTeK Computer INC.
Product Name: P4S800
Version: REV 1.xx
Serial Number: xxxxxxxxxxx
BugLink: http://bugs.launchpad.net/bugs/366682
ASUS P4S800 will hang when rebooting unless reboot=b is specified.
Add a quirk to reboot through the bios.
Signed-off-by: Leann Ogasawara <leann.ogasawara@canonical.com>
LKML-Reference: <1259972107.4629.275.camel@emiko>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Cc: <stable@kernel.org>
Commit ae21ee65e8 "PCI: acs p2p upsteram
forwarding enabling" doesn't actually enable ACS.
Add a function to pci core to allow an IOMMU to request that ACS
be enabled. The existing mechanism of using iommu_found() in the pci
core to know when ACS should be enabled doesn't actually work due to
initialization order; iommu has only been detected not initialized.
Have Intel and AMD IOMMUs request ACS, and Xen does as well during early
init of dom0.
Cc: Allen Kay <allen.m.kay@intel.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Cc: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Chris Wright <chrisw@sous-sol.org>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
This allows us to use the BIOS SR-IOV allocations rather than assigning
our own later on.
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
"Definition" is misspelled "defintion" in several comments; this
patch fixes them. No code changes.
Signed-off-by: Adam Buchbinder <adam.buchbinder@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
tick_resume() is never called on secondary processors. Presumably this
is because they are offlined for suspend on native and so this is
normally taken care of in the CPU onlining path. Under Xen we keep all
CPUs online over a suspend.
This patch papers over the issue for me but I will investigate a more
generic, less hacky, way of doing to the same.
tick_suspend is also only called on the boot CPU which I presume should
be fixed too.
Signed-off-by: Ian Campbell <Ian.Campbell@citrix.com>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: Stable Kernel <stable@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
If Xen wants to return to a 32b usermode with sysret it must use the
right form. When using VCGF_in_syscall to trigger this, it looks at
the code segment and does a 32b sysret if it is FLAT_USER_CS32.
However, this is different from __USER32_CS, so it fails to return
properly if we use the normal Linux segment.
So avoid the whole mess by dropping VCGF_in_syscall and simply use
plain iret to return to usermode.
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Acked-by: Jan Beulich <jbeulich@novell.com>
Cc: Stable Kernel <stable@kernel.org>
printk timestamping uses sched_clock, which in turn relies on runstate
info under Xen. So make sure we set it up before any printks can
be called.
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: Stable Kernel <stable@kernel.org>
The commit "xen: re-register runstate area earlier on resume" caused us
to never try and setup the runstate area for secondary CPUs. Ensure that
we do this...
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: Stable Kernel <stable@kernel.org>
Otherwise the timer is disabled by dpm_suspend_noirq() which in turn prevents
correct operation of stop_machine on multi-processor systems and breaks
suspend.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: Stable Kernel <stable@kernel.org>
pvops kernels >= 2.6.30 can currently only be saved and restored once. The
second attempt to save results in:
ERROR Internal error: Frame# in pfn-to-mfn frame list is not in pseudophys
ERROR Internal error: entry 0: p2m_frame_list[0] is 0xf2c2c2c2, max 0x120000
ERROR Internal error: Failed to map/save the p2m frame list
I finally narrowed it down to:
commit cdaead6b4e
Author: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Date: Fri Feb 27 15:34:59 2009 -0800
xen: split construction of p2m mfn tables from registration
Build the p2m_mfn_list_list early with the rest of the p2m table, but
register it later when the real shared_info structure is in place.
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
The unforeseen side-effect of this change was to cause the mfn list list to not
be rebuilt on resume. Prior to this change it would have been rebuilt via
xen_post_suspend() -> xen_setup_shared_info() -> xen_setup_mfn_list_list().
Fix by explicitly calling xen_build_mfn_list_list() from xen_post_suspend().
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: Stable Kernel <stable@kernel.org>
Even if have_vcpu_info_placement is not set, we still need to set up
the runstate area on each resumed vcpu.
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: Stable Kernel <stable@kernel.org>
This is necessary to ensure the runstate area is available to
xen_sched_clock before any calls to printk which will require it in
order to provide a timestamp.
I chose to pull the xen_setup_runstate_info out of xen_time_init into
the caller in order to maintain parity with calling
xen_setup_runstate_info separately from calling xen_time_resume.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: Stable Kernel <stable@kernel.org>
The x86 lapic nmi watchdog does not recognize AMD Family 11h,
resulting in:
NMI watchdog: CPU not supported
As far as I can see from available documentation (the BKDM),
family 11h looks identical to family 10h as far as the PMU
is concerned.
Extending the check to accept family 11h results in:
Testing NMI watchdog ... OK.
I've been running with this change on a Turion X2 Ultra ZM-82
laptop for a couple of weeks now without problems.
Signed-off-by: Mikael Pettersson <mikpe@it.uu.se>
Cc: Andreas Herrmann <andreas.herrmann3@amd.com>
Cc: Joerg Roedel <joerg.roedel@amd.com>
Cc: <stable@kernel.org>
LKML-Reference: <19223.53436.931768.278021@pilspetsen.it.uu.se>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
pci_get_device will increase the ref count of found device.
Although we're going to reset soon, we should use pci_dev_put
to decrease the ref count for consistency.
Signed-off-by: Xiaotian Feng <dfeng@redhat.com>
Acked-by: H. Peter Anvin <hpa@zytor.com>
Cc: Yinghai Lu <yinghai@kernel.org>
LKML-Reference: <1259838400-23833-1-git-send-email-dfeng@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
On a multi-node x3950M2 system, there's a slight oddity in the
PCI device tree for all secondary nodes:
30:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1)
\-33:00.0 PCI bridge: IBM CalIOC2 PCI-E Root Port (rev 01)
\-34:00.0 RAID bus controller: LSI Logic / Symbios Logic MegaRAID SAS 1078 (rev 04)
...as compared to the primary node:
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1)
\-01:00.0 VGA compatible controller: ATI Technologies Inc ES1000 (rev 02)
03:00.0 PCI bridge: IBM CalIOC2 PCI-E Root Port (rev 01)
\-04:00.0 RAID bus controller: LSI Logic / Symbios Logic MegaRAID SAS 1078 (rev 04)
In both nodes, the LSI RAID controller hangs off a CalIOC2
device, but on the secondary nodes, the BIOS hides the VGA
device and substitutes the device tree ending with the disk
controller.
It would seem that Calgary devices don't necessarily appear at
the top of the PCI tree, which means that the current code to
find the Calgary IOMMU that goes with a particular device is
buggy.
Rather than walk all the way to the top of the PCI
device tree and try to match bus number with Calgary descriptor,
the code needs to examine each parent of the particular device;
if it encounters a Calgary with a matching bus number, simply
use that.
Otherwise, we BUG() when the bus number of the Calgary doesn't
match the bus number of whatever's at the top of the device tree.
Extra note: This patch appears to work correctly for the x3950
that came before the x3950 M2.
Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
Acked-by: Muli Ben-Yehuda <muli@il.ibm.com>
Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: Joerg Roedel <joerg.roedel@amd.com>
Cc: Yinghai Lu <yhlu.kernel@gmail.com>
Cc: Jon D. Mason <jdmason@kudzu.us>
Cc: Corinna Schultz <coschult@us.ibm.com>
Cc: <stable@kernel.org>
LKML-Reference: <20091202230556.GG10295@tux1.beaverton.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
update_transition_efer() masks out some efer bits when deciding whether
to switch the msr during guest entry; for example, NX is emulated using the
mmu so we don't need to disable it, and LMA/LME are handled by the hardware.
However, with shared msrs, the comparison is made against a stale value;
at the time of the guest switch we may be running with another guest's efer.
Fix by deferring the mask/compare to the actual point of guest entry.
Noted by Marcelo.
Signed-off-by: Avi Kivity <avi@redhat.com>
This way, we don't leave a dangling notifier on cpu hotunplug or module
unload. In particular, module unload leaves the notifier pointing into
freed memory.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Otherwise would cause VMEntry failure when using ept=0 on unrestricted guest
supported processors.
Signed-off-by: Sheng Yang <sheng@linux.intel.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
While we are never normally passed an instruction that exceeds 15 bytes,
smp games can cause us to attempt to interpret one, which will cause
large latencies in non-preempt hosts.
Cc: stable@kernel.org
Signed-off-by: Avi Kivity <avi@redhat.com>
This new IOCTL exports all yet user-invisible states related to
exceptions, interrupts, and NMIs. Together with appropriate user space
changes, this fixes sporadic problems of vmsave/restore, live migration
and system reset.
[avi: future-proof abi by adding a flags field]
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
These happen when we trap an exception when another exception is being
delivered; we only expect these with MCEs and page faults. If something
unexpected happens, things probably went south and we're better off reporting
an internal error and freezing.
Signed-off-by: Avi Kivity <avi@redhat.com>
Usually userspace will freeze the guest so we can inspect it, but some
internal state is not available. Add extra data to internal error
reporting so we can expose it to the debugger. Extra data is specific
to the suberror.
Signed-off-by: Avi Kivity <avi@redhat.com>
Decouple KVM_GUESTDBG_INJECT_DB and KVM_GUESTDBG_INJECT_BP from
KVM_GUESTDBG_ENABLE, their are actually orthogonal. At this chance,
avoid triggering the WARN_ON in kvm_queue_exception if there is already
an exception pending and reject such invalid requests.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Otherwise kvm will leak memory on multiple KVM_CREATE_IRQCHIP.
Also serialize multiple accesses with kvm->lock.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Large page translations are always synchronized (either in level 3
or level 2), so its not necessary to properly deal with them
in the invlpg handler.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
GUEST_CR3 is updated via kvm_set_cr3 whenever CR3 is modified from
outside guest context. Similarly pdptrs are updated via load_pdptrs.
Let kvm_set_cr3 perform the update, removing it from the vcpu_run
fast path.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Acked-by: Acked-by: Sheng Yang <sheng@linux.intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Instead of reloading syscall MSRs on every preemption, use the new shared
msr infrastructure to reload them at the last possible minute (just before
exit to userspace).
Improves vcpu/idle/vcpu switches by about 2000 cycles (when EFER needs to be
reloaded as well).
[jan: fix slot index missing indirection]
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
The various syscall-related MSRs are fairly expensive to switch. Currently
we switch them on every vcpu preemption, which is far too often:
- if we're switching to a kernel thread (idle task, threaded interrupt,
kernel-mode virtio server (vhost-net), for example) and back, then
there's no need to switch those MSRs since kernel threasd won't
be exiting to userspace.
- if we're switching to another guest running an identical OS, most likely
those MSRs will have the same value, so there's little point in reloading
them.
- if we're running the same OS on the guest and host, the MSRs will have
identical values and reloading is unnecessary.
This patch uses the new user return notifiers to implement last-minute
switching, and checks the msr values to avoid unnecessary reloading.
Signed-off-by: Avi Kivity <avi@redhat.com>
Currently MSR_KERNEL_GS_BASE is saved and restored as part of the
guest/host msr reloading. Since we wish to lazy-restore all the other
msrs, save and reload MSR_KERNEL_GS_BASE explicitly instead of using
the common code.
Signed-off-by: Avi Kivity <avi@redhat.com>
The svm_set_cr0() call will initialize save->cr0 properly even when npt is
enabled, clearing the NW and CD bits as expected, so we don't need to
initialize it manually for npt_enabled anymore.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
svm_vcpu_reset() was not properly resetting the contents of the guest-visible
cr0 register, causing the following issue:
https://bugzilla.redhat.com/show_bug.cgi?id=525699
Without resetting cr0 properly, the vcpu was running the SIPI bootstrap routine
with paging enabled, making the vcpu get a pagefault exception while trying to
run it.
Instead of setting vmcb->save.cr0 directly, the new code just resets
kvm->arch.cr0 and calls kvm_set_cr0(). The bits that were set/cleared on
vmcb->save.cr0 (PG, WP, !CD, !NW) will be set properly by svm_set_cr0().
kvm_set_cr0() is used instead of calling svm_set_cr0() directly to make sure
kvm_mmu_reset_context() is called to reset the mmu to nonpaging mode.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
This should have no effect, it is just to make the code clearer.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
When we migrate a kvm guest that uses pvclock between two hosts, we may
suffer a large skew. This is because there can be significant differences
between the monotonic clock of the hosts involved. When a new host with
a much larger monotonic time starts running the guest, the view of time
will be significantly impacted.
Situation is much worse when we do the opposite, and migrate to a host with
a smaller monotonic clock.
This proposed ioctl will allow userspace to inform us what is the monotonic
clock value in the source host, so we can keep the time skew short, and
more importantly, never goes backwards. Userspace may also need to trigger
the current data, since from the first migration onwards, it won't be
reflected by a simple call to clock_gettime() anymore.
[marcelo: future-proof abi with a flags field]
[jan: fix KVM_GET_CLOCK by clearing flags field instead of checking it]
Signed-off-by: Glauber Costa <glommer@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Commit 705c5323 opened the doors of hell by unconditionally injecting
single-step flags as long as guest_debug signaled this. This doesn't
work when the guest branches into some interrupt or exception handler
and triggers a vmexit with flag reloading.
Fix it by saving cs:rip when user space requests single-stepping and
restricting the trace flag injection to this guest code position.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Support for Xen PV-on-HVM guests can be implemented almost entirely in
userspace, except for handling one annoying MSR that maps a Xen
hypercall blob into guest address space.
A generic mechanism to delegate MSR writes to userspace seems overkill
and risks encouraging similar MSR abuse in the future. Thus this patch
adds special support for the Xen HVM MSR.
I implemented a new ioctl, KVM_XEN_HVM_CONFIG, that lets userspace tell
KVM which MSR the guest will write to, as well as the starting address
and size of the hypercall blobs (one each for 32-bit and 64-bit) that
userspace has loaded from files. When the guest writes to the MSR, KVM
copies one page of the blob from userspace to the guest.
I've tested this patch with a hacked-up version of Gerd's userspace
code, booting a number of guests (CentOS 5.3 i386 and x86_64, and
FreeBSD 8.0-RC1 amd64) and exercising PV network and block devices.
[jan: fix i386 build warning]
[avi: future proof abi with a flags field]
Signed-off-by: Ed Swierk <eswierk@aristanetworks.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
This (broken) check dates back to the days when this code was shared
across architectures. x86 has IOMEM, so drop it.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
If cpufreq can't determine the CPU khz, or cpufreq is not compiled in,
we should fallback to the measured TSC khz.
Signed-off-by: Zachary Amsden <zamsden@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
New AMD processors (Family 0x10 models 8+) support the Pause
Filter Feature. This feature creates a new field in the VMCB
called Pause Filter Count. If Pause Filter Count is greater
than 0 and intercepting PAUSEs is enabled, the processor will
increment an internal counter when a PAUSE instruction occurs
instead of intercepting. When the internal counter reaches the
Pause Filter Count value, a PAUSE intercept will occur.
This feature can be used to detect contended spinlocks,
especially when the lock holding VCPU is not scheduled.
Rescheduling another VCPU prevents the VCPU seeking the
lock from wasting its quantum by spinning idly.
Experimental results show that most spinlocks are held
for less than 1000 PAUSE cycles or more than a few
thousand. Default the Pause Filter Counter to 3000 to
detect the contended spinlocks.
Processor support for this feature is indicated by a CPUID
bit.
On a 24 core system running 4 guests each with 16 VCPUs,
this patch improved overall performance of each guest's
32 job kernbench by approximately 3-5% when combined
with a scheduler algorithm thati caused the VCPU to
sleep for a brief period. Further performance improvement
may be possible with a more sophisticated yield algorithm.
Signed-off-by: Mark Langsdorf <mark.langsdorf@amd.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
New NHM processors will support Pause-Loop Exiting by adding 2 VM-execution
control fields:
PLE_Gap - upper bound on the amount of time between two successive
executions of PAUSE in a loop.
PLE_Window - upper bound on the amount of time a guest is allowed to execute in
a PAUSE loop
If the time, between this execution of PAUSE and previous one, exceeds the
PLE_Gap, processor consider this PAUSE belongs to a new loop.
Otherwise, processor determins the the total execution time of this loop(since
1st PAUSE in this loop), and triggers a VM exit if total time exceeds the
PLE_Window.
* Refer SDM volume 3b section 21.6.13 & 22.1.3.
Pause-Loop Exiting can be used to detect Lock-Holder Preemption, where one VP
is sched-out after hold a spinlock, then other VPs for same lock are sched-in
to waste the CPU time.
Our tests indicate that most spinlocks are held for less than 212 cycles.
Performance tests show that with 2X LP over-commitment we can get +2% perf
improvement for kernel build(Even more perf gain with more LPs).
Signed-off-by: Zhai Edwin <edwin.zhai@intel.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
With all important informations now delivered through
tracepoints we can savely remove the nsvm_printk debugging
code for nested svm.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
This patch adds a tracepoint for the event that the guest
executed the SKINIT instruction. This information is
important because SKINIT is an SVM extenstion not yet
implemented by nested SVM and we may need this information
for debugging hypervisors that do not yet run on nested SVM.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
This patch adds a tracepoint for the event that the guest
executed the INVLPGA instruction.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
This patch adds a special tracepoint for the event that a
nested #vmexit is injected because kvm wants to inject an
interrupt into the guest.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
This patch adds a tracepoint for a nested #vmexit that gets
re-injected to the guest.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
This patch adds a tracepoint for every #vmexit we get from a
nested guest.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
This patch adds a dedicated kvm tracepoint for a nested
vmrun.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
The nested SVM code emulates a #vmexit caused by a request
to open the irq window right in the request function. This
is a bug because the request function runs with preemption
and interrupts disabled but the #vmexit emulation might
sleep. This can cause a schedule()-while-atomic bug and is
fixed with this patch.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
If event_inj is valid on a #vmexit the host CPU would write
the contents to exit_int_info, so the hypervisor knows that
the event wasn't injected.
We don't do this in nested SVM by now which is a bug and
fixed by this patch.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
For a while now, we are issuing a rdmsr instruction to find out which
msrs in our save list are really supported by the underlying machine.
However, it fails to account for kvm-specific msrs, such as the pvclock
ones.
This patch moves then to the beginning of the list, and skip testing them.
Cc: stable@kernel.org
Signed-off-by: Glauber Costa <glommer@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Push TF and RF injection and filtering on guest single-stepping into the
vender get/set_rflags callbacks. This makes the whole mechanism more
robust wrt user space IOCTL order and instruction emulations.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Disable paravirt MMU capability reporting, so that new (or rebooted)
guests switch to native operation.
Paravirt MMU is a burden to maintain and does not bring significant
advantages compared to shadow anymore.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Much of so far vendor-specific code for setting up guest debug can
actually be handled by the generic code. This also fixes a minor deficit
in the SVM part /wrt processing KVM_GUESTDBG_ENABLE.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Both VMX and SVM require per-cpu memory allocation, which is done at module
init time, for only online cpus.
Backend was not allocating enough structure for all possible CPUs, so
new CPUs coming online could not be hardware enabled.
Signed-off-by: Zachary Amsden <zamsden@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
They are globals, not clearly protected by any ordering or locking, and
vulnerable to various startup races.
Instead, for variable TSC machines, register the cpufreq notifier and get
the TSC frequency directly from the cpufreq machinery. Not only is it
always right, it is also perfectly accurate, as no error prone measurement
is required.
On such machines, when a new CPU online is brought online, it isn't clear what
frequency it will start with, and it may not correspond to the reference, thus
in hardware_enable we clear the cpu_tsc_khz variable to zero and make sure
it is set before running on a VCPU.
Signed-off-by: Zachary Amsden <zamsden@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
This patch replaces them with native_read_tsc() which can
also be used in expressions and saves a variable on the
stack in this case.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
The exit_int_info field is only written by the hardware and
never read. So it does not need to be copied on a vmrun
emulation.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
This patch reorganizes the logic in svm_interrupt_allowed to
make it better to read. This is important because the logic
is a lot more complicated with Nested SVM.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
X86 CPUs need to have some magic happening to enable the virtualization
extensions on them. This magic can result in unpleasant results for
users, like blocking other VMMs from working (vmx) or using invalid TLB
entries (svm).
Currently KVM activates virtualization when the respective kernel module
is loaded. This blocks us from autoloading KVM modules without breaking
other VMMs.
To circumvent this problem at least a bit, this patch introduces on
demand activation of virtualization. This means, that instead
virtualization is enabled on creation of the first virtual machine
and disabled on destruction of the last one.
So using this, KVM can be easily autoloaded, while keeping other
hypervisors usable.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
nested_svm_map unnecessarily takes mmap_sem around gfn_to_page, since
gfn_to_page / get_user_pages are responsible for it.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Acked-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Avi Kivity <avi@redhat.com>
- Change returned handle_invalid_guest_state() to return relevant exit codes
- Move triggering the emulation from vmx_vcpu_run() to vmx_handle_exit()
- Return to userspace instead of repeatedly trying to emulate instructions that have already failed
Signed-off-by: Mohammed Gamal <m.gamal005@gmail.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
This adds pusha and popa instructions (opcodes 0x60-0x61), this enables booting
MINIX with invalid guest state emulation on.
[marcelo: remove unused variable]
Signed-off-by: Mohammed Gamal <m.gamal005@gmail.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Add missing decoder flags for or instructions (0xc-0xd).
Signed-off-by: Mohammed Gamal <m.gamal005@gmail.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
The only thing it protects now is interrupt injection into lapic and
this can work lockless. Even now with kvm->irq_lock in place access
to lapic is not entirely serialized since vcpu access doesn't take
kvm->irq_lock.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Maintain back mapping from irqchip/pin to gsi to speedup
interrupt acknowledgment notifications.
[avi: build fix on non-x86/ia64]
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
This removes assumptions that max GSIs is smaller than number of pins.
Sharing is tracked on pin level not GSI level.
[avi: no PIC on ia64]
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Introduces a new decode option "No64", which is used for instructions that are
invalid in long mode.
Signed-off-by: Mohammed Gamal <m.gamal005@gmail.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Even it is in error path unlikely taken, add_timer_on() at
CPU_DOWN_FAILED* needs to be skipped if mce_timer is disabled.
Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Jan Beulich <jbeulich@novell.com>
Cc: <stable@kernel.org>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
This at once also gets the alignment specification right for
x86-64.
Signed-off-by: Jan Beulich <jbeulich@novell.com>
LKML-Reference: <4B0FF8F80200007800022708@vpn.id2.novell.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Having run into the run-(boot-)time check a couple of times lately,
I finally took time to find a build-time check so that one doesn't
need to analyze the register/stack dump and resolve this (through
manual lookup in vmlinux) to the offending construct.
The assembler will emit a message like "Error: value of <num> too
large for field of 1 bytes at <offset>", which while not pointing
out the source location still makes analysis quite a bit easier.
Signed-off-by: Jan Beulich <jbeulich@novell.com>
LKML-Reference: <4B0FF8AA0200007800022703@vpn.id2.novell.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
fixup_irqs() already has a mdelay(). Remove the extra and
unnecessary mdelay() from cpu_disable_common().
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: Maciej W. Rozycki <macro@linux-mips.org>
Cc: ebiederm@xmission.com
Cc: garyhade@us.ibm.com
LKML-Reference: <20091201233335.232177348@sbs-t61.sc.intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
In the case when cpu goes offline, fixup_irqs() will forward any
unhandled interrupt on the offlined cpu to the new cpu
destination that is handling the corresponding interrupt. This
interrupt forwarding is done via IPI's. Hence, in this case also
level-triggered io-apic interrupt will be seen as an edge
interrupt in the cpu's APIC IRR.
Document this scenario in the code which handles this case by doing
an explicit EOI to the io-apic to clear remote IRR of the io-apic RTE.
Requested-by: Maciej W. Rozycki <macro@linux-mips.org>
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: Maciej W. Rozycki <macro@linux-mips.org>
Cc: ebiederm@xmission.com
Cc: garyhade@us.ibm.com
LKML-Reference: <20091201233335.143970505@sbs-t61.sc.intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Maciej W. Rozycki reported:
> 82093AA I/O APIC has its version set to 0x11 and it
> does not support the EOI register. Similarly I/O APICs
> integrated into the 82379AB south bridge and the 82374EB/SB
> EISA component.
IO-APIC versions below 0x20 don't support EOI register.
Some of the Intel ICH Specs (ICH2 to ICH5) documents the io-apic
version as 0x2. This is an error with documentation and these
ICH chips use io-apic's of version 0x20 and indeed has a working
EOI register for the io-apic.
Fix the EOI register detection mechanism to check for version
0x20 and beyond.
And also, a platform can potentially have io-apic's with
different versions. Make the EOI register check per io-apic.
Reported-by: Maciej W. Rozycki <macro@linux-mips.org>
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: ebiederm@xmission.com
Cc: garyhade@us.ibm.com
LKML-Reference: <20091201233335.065361533@sbs-t61.sc.intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
When the level-triggered interrupt is seen as an edge interrupt,
we try to clear the remoteIRR explicitly (using either an
io-apic eoi register when present or through the idea of
changing trigger mode of the io-apic RTE to edge and then back
to level). But this explicit try also needs to happen before we
try to migrate the irq. Otherwise irq migration attempt will
fail anyhow, as it postpones the irq migration to a later
attempt when it sees the remoteIRR in the io-apic RTE still set.
Signed-off-by: "Maciej W. Rozycki" <macro@linux-mips.org>
Reviewed-by: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: ebiederm@xmission.com
Cc: garyhade@us.ibm.com
LKML-Reference: <20091201233334.975416130@sbs-t61.sc.intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
When we disable a breakpoint through dr7, we unregister it right
away, making us lose track of its corresponding address
register value.
It means that the following sequence would be unsupported:
- set address in dr0
- enable it through dr7
- disable it through dr7
- enable it through dr7
because we lost the address register value when we disabled the
breakpoint.
Don't unregister the disabled breakpoints but rather disable
them.
Reported-by: "K.Prasad" <prasad@linux.vnet.ibm.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <1259735536-9236-1-git-send-regression-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The semantics the PAT code expect of is_untracked_pat_range() is "is
this range completely contained inside the untracked region." This
means that checkin 8a27138924 was
technically wrong, because the implementation needlessly confusing.
The sane interface is for it to take a semiclosed range like just
about everything else (as evidenced by the sheer number of "- 1"'s
removed by that patch) so change the actual implementation to match.
Reported-by: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jack Steiner <steiner@sgi.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
LKML-Reference: <20091119202341.GA4420@sgi.com>
copy_edd() should be __init.
warning msg:
WARNING: vmlinux.o(.text+0x7759): Section mismatch in reference from the
function copy_edd() to the variable .init.data:boot_params
The function copy_edd() references
the variable __initdata boot_params.
This is often because copy_edd lacks a __initdata
annotation or the annotation of boot_params is wrong.
Signed-off-by: ZhenwenXu <helight.xu@gmail.com>
LKML-Reference: <4B139F8F.4000907@gmail.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
commit 746357d (x86: Prevent GCC 4.4.x (pentium-mmx et al) function
prologue wreckage) uses -mtune=generic to work around the function
prologue problem with mcount on -march=pentium-mmx and others.
Jakub pointed out that we can use -maccumulate-outgoing-args instead
which is selected by -mtune=generic and prevents the problem without
losing the -march specific optimizations.
Pointed-out-by: Jakub Jelinek <jakub@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: stable@kernel.org
Andrew complained rightly that the WARN_ON in hpet_next_event() is
confusing and the code comment not really helpful.
Change it to WARN_ONCE and print the reason in clear text. Change the
comment to explain what kind of hardware wreckage we deal with.
Pointed-out-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Venki Pallipadi <venkatesh.pallipadi@intel.com>
The data that was stored in this table is now available in
dev->archdata.iommu. So this table is not longer necessary.
This patch removes the remaining uses of that variable and
removes it from the code.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
This patch removes the ugly contruct where the
iommu->lock must be released while before calling the
reset_iommu_command_buffer function.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
This patch cleans up the code to flush device table entries
in the IOMMU. With this chance the driver can get rid of the
iommu_queue_inv_dev_entry() function.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
This patch adds a function to flush a DTE entry for a given
struct device and replaces iommu_queue_inv_dev_entry calls
with this function where appropriate.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
This patch cleans up the attach_device and detach_device
paths and fixes reference counting while at it.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
This patch introduces a list to each protection domain which
keeps all devices associated with the domain. This can be
used later to optimize certain functions and to completly
remove the amd_iommu_pd_table.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
This patch adds a reference count to each device to count
how often the device was bound to that domain. This is
important for single devices that act as an alias for a
number of others. These devices must stay bound to their
domains until all devices that alias to it are unbound from
the same domain.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
This patch changes IOMMU code to use dev->archdata->iommu to
store information about the alias device and the domain the
device is attached to.
This allows the driver to get rid of the amd_iommu_pd_table
in the future.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
This patch makes device isolation mandatory and removes
support for the amd_iommu=share option. This simplifies the
code in several places.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
This patch rearranges two dma_ops related functions so that
their forward declarations are not longer necessary.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
This patch moves alloc_pte() and fetch_pte() into the page
table handling code section so that the forward declarations
for them could be removed.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
The logic of these two functions is reimplemented (at least
in parts) in places in the code. This patch removes these
code duplications and uses the functions instead. As a side
effect it moves check_device() to the helper function code
section.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
This is a helper function and when its placed in the helper
function section we can remove its forward declaration.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
With the previous changes the get_device_resources function
can be simplified even more. The only important information
for the callers is the protection domain.
This patch renames the function to get_domain() and let it
only return the protection domain for a device.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
If there is no domain associated to a device yet and the
device has an alias device which already has a domain, the
original device needs to have the same domain as the alias
device.
This patch changes domain_for_device to handle this
situation and directly assigns the alias device domain to
the device in this situation.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
With the prior changes this parameter is not longer
required. This patch removes it from the function and all
callers.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Since the assumption that an dma_ops domain is only bound to
one IOMMU was given up we need to make alloc_new_range aware
of it.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Every call-place of get_device_resources calls check_device
before it. So call it from get_device_resources directly and
simplify the code.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
The check_device logic needs to include the dma_supported
checks to be really sure. Merge the dma_supported logic into
check_device and use it to implement dma_supported.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
The non-present cache flag was IOMMU local until now which
doesn't make sense. Make this a global flag so we can remove
the lase user of 'struct iommu' in the map/unmap path.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
This patch reimplements the function
flush_all_domains_on_iommu to use the global protection
domain list.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
This patch reimplementes the amd_iommu_flush_all_domains
function to use the global protection domain list instead
of flushing every domain on every IOMMU.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
This patch adds code to keep a global list of all protection
domains. This allows to simplify the resume code.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
This iommu_flush_tlb_pde function does essentially the same.
So the iommu_flush_domain function is redundant and can be
removed.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
This patch extends the iommu_flush_pages function to flush
the TLB entries on all IOMMUs the domain has devices on.
This basically gives up the former assumption that dma_ops
domains are only bound to one IOMMU in the system.
For dma_ops domains this is still true but not for
IOMMU-API managed domains. Giving this assumption up for
dma_ops domains too allows code simplification.
Further it splits out the main logic into a generic function
which can be used by iommu_flush_tlb too.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
This patch adds a function to the AMD IOMMU driver which
completes all queued commands an all IOMMUs a specific
domain has devices attached on. This is required in a later
patch when per-domain flushing is implemented.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
This patch adds reference counting for protection domains
per IOMMU. This allows a smarter TLB flushing strategy.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
This patch adds an index field to struct amd_iommu which can
be used to lookup it up in an array. This index will be used
in struct protection_domain to keep track which protection
domain has devices behind which IOMMU.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
This patch updates the copyright headers in the relevant AMD
IOMMU driver files to match the date of the latest changes.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
This patch moves all function declarations which are only
used inside the driver code to a seperate header file.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
In-kernel user breakpoints are created using functions in which
we pass breakpoint parameters as individual variables: address,
length and type.
Although it fits well for x86, this just does not scale across
archictectures that may support this api later as these may have
more or different needs. Pass in a perf_event_attr structure
instead because it is meant to evolve as much as possible into
a generic hardware breakpoint parameter structure.
Reported-by: K.Prasad <prasad@linux.vnet.ibm.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <1259294154-5197-1-git-send-regression-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
If pat is disabled (boot with nopat), there's no need to create
debugfs for it, it's empty all the time.
Signed-off-by: Xiaotian Feng <dfeng@redhat.com>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
LKML-Reference: <1259236428-16329-1-git-send-email-dfeng@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Explicitly mmap the UV chipset MMR address ranges used to
access blade-local registers. Although these same MMRs are also
mmaped at higher addresses, the low range is more
convenient when accessing blade-local registers.
The low range addresses always alias to the local blade
regardless of the blade id.
Signed-off-by: Jack Steiner <steiner@sgi.com>
LKML-Reference: <20091125162018.GA25445@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This prevents kernel threads from inheriting non-null segment
selectors, and causing optimizations in __switch_to() to be
ineffective.
Signed-off-by: Brian Gerst <brgerst@gmail.com>
Cc: Tim Blechmann <tim@klingt.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Cc: Jan Beulich <JBeulich@novell.com>
LKML-Reference: <1259165856-3512-1-git-send-email-brgerst@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Make it readable in the source too, not just in the assembly output.
No change in functionality.
Cc: Brian Gerst <brgerst@gmail.com>
LKML-Reference: <1259176706-5908-1-git-send-email-brgerst@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Zero the input register in the exception handler instead of
using an extra register to pass in a zero value.
Signed-off-by: Brian Gerst <brgerst@gmail.com>
LKML-Reference: <1259176706-5908-1-git-send-email-brgerst@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The mce_disable_cpu() and mce_reenable_cpu() are called only
from mce_cpu_callback() which is marked as __cpuinit.
So these functions can be __cpuinit too.
Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Cc: Andi Kleen <ak@linux.intel.com>
LKML-Reference: <4B0E3C4E.4090809@jp.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Limit the number of per cpu TSC sync messages by only printing
to the console if an error occurs, otherwise print as a DEBUG
message.
The info message "Skipping synchronization ..." is only printed
after the last cpu has booted.
Signed-off-by: Mike Travis <travis@sgi.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Roland Dreier <rdreier@cisco.com>
Cc: Randy Dunlap <rdunlap@xenotime.net>
Cc: Tejun Heo <tj@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Greg Kroah-Hartman <gregkh@suse.de>
Cc: Yinghai Lu <yhlu.kernel@gmail.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Cc: Jack Steiner <steiner@sgi.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20091118002222.181053000@alcatraz.americas.sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
When we schedule out a breakpoint from the cpu, we also
incidentally remove the "Global exact breakpoint" flag from the
breakpoint control register. It makes us losing the fine grained
precision about the origin of the instructions that may trigger
breakpoint exceptions for the other breakpoints running in this
cpu.
Reported-by: Prasad <prasad@linux.vnet.ibm.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <1259211878-6013-1-git-send-regression-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This simplifies the error handling when we create a breakpoint.
We don't need to check the NULL return value corner case anymore
since we have improved perf_event_create_kernel_counter() to
always return an error code in the failure case.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Prasad <prasad@linux.vnet.ibm.com>
LKML-Reference: <1259210142-5714-3-git-send-regression-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Mtdblock driver doesn't call flush_dcache_page for pages in request. So,
this causes problems on architectures where the icache doesn't fill from
the dcache or with dcache aliases. The patch fixes this.
The ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE symbol was introduced to avoid
pointless empty cache-thrashing loops on architectures for which
flush_dcache_page() is a no-op. Every architecture was provided with this
flush pages on architectires where ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE is
equal 1 or do nothing otherwise.
See "fix mtd_blkdevs problem with caches on some architectures" discussion
on LKML for more information.
Signed-off-by: Ilya Loginov <isloginov@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Peter Horton <phorton@bitbox.co.uk>
Cc: "Ed L. Cashin" <ecashin@coraid.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Make the initialization more readable, plus tidy up a few small
visual details as well.
No change in functionality.
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Percpu symbols now occupy the same namespace as other global
symbols and as such short global symbols without subsystem
prefix tend to collide with local variables. dr7 percpu
variable used by x86 was hit by this. Rename it to cpu_dr7.
The rename also makes it more consistent with its fellow
cpu_debugreg percpu variable.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>,
Cc: Andrew Morton <akpm@linux-foundation.org>
LKML-Reference: <20091125115856.GA17856@elte.hu>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
iommu=soft boot option forces the kernel to use swiotlb.
( This has the side-effect of enabling the swiotlb over the
GART if this boot option is provided. This is the desired
behavior of the swiotlb boot option and works like that
for all other hw-IOMMU drivers. )
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: yinghai@kernel.org
LKML-Reference: <20091125084611O.fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The existing interface only has a pre-order callback. This change
adds an additional parameter for a post-order callback which will
be more useful for bus scans. ACPICA BZ 779.
Also update the external calls to acpi_walk_namespace.
http://www.acpica.org/bugzilla/show_bug.cgi?id=779
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
This patch factors out the search for an MMCONFIG region, which was
previously implemented in both mmconfig_32 and mmconfig_64. No functional
change.
Reviewed-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
No functional change; just tidy up printks and make them more consistent
with the rest of PCI.
Reviewed-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
This is only used internally now, but eventually will be used in the
hot-remove path to remove the MMCONFIG region associated with a host bridge.
Reviewed-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
This changes pci_mmcfg_region from a table to a list, to make it easier
to add and remove MMCONFIG regions for PCI host bridge hotplug.
Reviewed-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
This replaces "typeof(pci_mmcfg_config[0])" with the actual type because
I plan to convert pci_mmcfg_config to a list, and then "pci_mmcfg_config[0]"
won't mean anything.
Reviewed-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
The virtual address is only used for x86_64, but it's so much simpler
to manage it as part of the pci_mmcfg_region that I think it's worth
wasting a pointer per MMCONFIG region on x86_32.
Reviewed-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Since pci_mmcfg_region contains the struct resource, no need to pass the
pci_mmcfg_region *and* the resource start/size.
Reviewed-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
This patch adds a resource and corresponding name to the MMCONFIG
structure. This makes allocation simpler (we can allocate the
resource and name at the same time we allocate the pci_mmcfg_region),
and gives us a way to hang onto the resource after inserting it.
This will be needed so we can release and free it when hot-removing
a host bridge.
Reviewed-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
No functional change, but simplifies a future patch to convert the table
to a list.
Reviewed-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
This only renames the struct pci_mmcfg_region members; no functional change.
Reviewed-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
This adds a struct pci_mmcfg_region with a little more information
than the struct acpi_mcfg_allocation used previously. The acpi_mcfg
structure is defined by the spec, so we can't change it.
To begin with, struct pci_mmcfg_region is basically the same as the
ACPI MCFG version, but future patches will add more information.
Reviewed-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
This factors out the common "bus << 20" expression used when computing the
MMCONFIG address.
Reviewed-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Since all MMCONFIG regions go through pci_mmconfig_add(), we can test the
address once there. If the caller supplies an address of zero, we never
insert it in the pci_mmcfg_config[] table, so no need to test it elsewhere.
Reviewed-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
We never set pci_mmcfg_config unless we increment pci_mmcfg_config_num,
so there's no need to test both pci_mmcfg_config_num and pci_mmcfg_config.
Reviewed-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
This patch encapsulate pci_mmcfg_config[] updates. All alloc/free is now
done in pci_mmconfig_add() and free_all_mcfg(), so all updates to
pci_mmcfg_config[] and pci_mmcfg_config_num are in those two functions.
This replaces the previous sequence of extend_mmcfg(), fill_one_mmcfg()
with the single pci_mmconfig_add() interface. This interface is currently
static but will eventually be used in the host bridge hot-add path.
Reviewed-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Step through the ACPI MCFG table, not pci_mmcfg_config[]. No functional
change, but simplifies future patches that encapsulate pci_mmcfg_config[].
Reviewed-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Use a local variable, not pci_mmcfg_config_num, to count MCFG entries.
No functional change, but simplifies future changes.
Reviewed-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
