Add new V4L2 control to set AU delimiter for AVC.
Change-Id: I8c72cb89f18c9b2b550b906d797eafb73ac4ebbe
CRs-Fixed: 389030
Signed-off-by: Srinu Gorle <sgorle@codeaurora.org>
Signed-off-by: Neha Pandey <nehap@codeaurora.org>
Define Device Tree bindings for wfd and update the driver to match the
specification.
Change-Id: Ia204cf32aa1ccd5fd51999844dd73d740e90f0e2
Signed-off-by: Deva Ramasubramanian <dramasub@codeaurora.org>
Signed-off-by: Neha Pandey <nehap@codeaurora.org>
Move the domain specific mappings into subdevices to abstract away iommu
from wfd-ioctl.c. This is especially needed as the encoder subdevices
for MSM8x60 and MSM8x74 differ in the iommu domain to which they map the
buffer to. This target specific handling needs to taken care of by the
respective subdevices rather than by wfd-ioctl which should be target
agnostic.
Signed-off-by: Deva Ramasubramanian <dramasub@codeaurora.org>
Conflicts:
drivers/media/video/msm_wfd/mdp-4-subdev.c
Change-Id: I83b2cbcff2b86b0f9cce9844b1e3b1607f5881ca
Signed-off-by: Neha Pandey <nehap@codeaurora.org>
Display commit will work as overlay commit when
MDP_DISPLAY_COMMIT_OVERLAY flag is set. It will be
non-blocking if wait_for_finish is false.
Signed-off-by: Ken Zhang <kenz@codeaurora.org>
Signed-off-by: Naseer Ahmed <naseer@codeaurora.org>
Change-Id: Ibd143dbfcd2fdd7a8fab3038c5af4e2fbc9ea198
Frame buffer maintains a reference count (f_count) which increased
by fget() and decreased by fput(). overlay play will apply
fget() to frame buffer if it was the soruce buffer and fput()
will be applied to it after pipe commit done. However there has
extra fput() apply to frame buffer at the time pipe is freed.
This patch fix the problem by clear MDP_MEMORY_ID_TYPE_FB from
pipe's flags to avoid extra fput() applying to frame buffer.
CRs-fixed: 411394
Change-Id: Ib2b72e6277480b5ace23cda554be485d9d477b3d
Signed-off-by: Kuogee Hsieh <khsieh@codeaurora.org>
Signed-off-by: Siddhartha Agrawal <agrawals@codeaurora.org>
cmdlist_commit perform dsi clock control which turns off
dsi clock unexpectly when dsi controller is configured as
command mode during booting up. This cause display panel
can not be lit up. This patch drop clock control mechanism
from cmdlist_commit and move dsi clock control mechanism to
caller.
Change-Id: I1882ea3ee1c90ac5d76958c986740582929a5e3b
Signed-off-by: Kuogee Hsieh <khsieh@codeaurora.org>
Signed-off-by: Siddhartha Agrawal <agrawals@codeaurora.org>
On timeout while waiting for the vsync, send the current
timestamp to the userspace. This resolves the infinite
wait seen during the bootup.
Change-Id: Ib1426c7c9a21c37758d7352740938627d4613fd6
Signed-off-by: Siddhartha Agrawal <agrawals@codeaurora.org>
vsync sysfs entries should be created in mdp_probe instead of
creating in panel on. This avoids waiting for the first event
control in framework
Change-Id: I18b05b8d2a65d489afc6e3274ec8dc7a5b9a5f9a
Signed-off-by: Mayank Chopra <makchopra@codeaurora.org>
Signed-off-by: Siddhartha Agrawal <agrawals@codeaurora.org>
vsync sysfs entries should be created in mdp_probe instead of
creating in panel on. This avoids waiting for the first event
control in framework
Change-Id: I983731481ea89bb7666be5f2a9f75a1e04fd963f
Signed-off-by: Mayank Chopra <makchopra@codeaurora.org>
Signed-off-by: Siddhartha Agrawal <agrawals@codeaurora.org>
Replace sending of vsync timestamp using uevents with sysfs entry
as uevent result in increase in power numbers due to broadcast in
nature.
Change-Id: I22cfbd68c8bcbe4a47e94074393f1cbf79920c58
Signed-off-by: Mayank Chopra <makchopra@codeaurora.org>
Signed-off-by: Siddhartha Agrawal <agrawals@codeaurora.org>
Conflicts:
drivers/video/msm/mdp_dma.c
Signed-off-by: Siddhartha Agrawal <agrawals@codeaurora.org>
Avoid eternal wait for vsync event when client tries to
read the corresponding sysfs entry. This will avoid hangs when
client tries to read in corner cases where the Timing
Generator or the clock or IRQ gets disabled.
CRs-fixed: 406752
Change-Id: I773687220b868823a9e4bfdae74361ee6487c5c6
Signed-off-by: Pradeep Jilagam <pjilagam@codeaurora.org>
Signed-off-by: Siddhartha Agrawal <agrawals@codeaurora.org>
Change to make the vsync IOCTL no wait during the disable sequence.
This is to increase the performance. Handle the synchronization of
vsync interrupt using state variables in drivers from now.
Change-Id: Ia5ec14493f233a95f21d01ea627200a6c278239f
Signed-off-by: Padmanabhan Komanduru <pkomandu@codeaurora.org>
Signed-off-by: Siddhartha Agrawal <agrawals@codeaurora.org>
Handle enabling/disabling the vsync interrupt and mdp clock
enabling/disabling in a better way on MDP 3.03 targets. This
will avoid target crashes due to unclocked register access.
CRs-fixed: 388751
Change-Id: I5c4a409772464ce7d06869374dcba5ad7e335955
Signed-off-by: Padmanabhan Komanduru <pkomandu@codeaurora.org>
Signed-off-by: Siddhartha Agrawal <agrawals@codeaurora.org>
When mdp commits a buffer to play, functions inside pan display, e.g.
mdp4_overlay_mdp_perf_upd are based on the current state of play, so
extending mutex to the scope of pan display to avoid race conditions.
Change-Id: I2e55567fd21de3738be066a2dee298d8122f12a3
Signed-off-by: Huaibin Yang <huaibiny@codeaurora.org>
Signed-off-by: Siddhartha Agrawal <agrawals@codeaurora.org>
Disable IRQ for DSI_CMD_TERM was already called in the isr.
Removing the extra call present in the cmds_rx API's.
Change-Id: I0000dd3166beb2a3b0c788327e1d7520e0c11a13
Signed-off-by: Siddhartha Agrawal <agrawals@codeaurora.org>
Add wait4videodone to commit dcs commands to dsi controller
while video engine is busy so that dcs commands will be
transmitted to panel at next beginning of BLLP.
Change-Id: I7ca40124813452f25a60f899437aeb9bce6feb14
Signed-off-by: Kuogee Hsieh <khsieh@codeaurora.org>
Signed-off-by: Siddhartha Agrawal <agrawals@codeaurora.org>
Pipe is not un-staged from mixer when it is unset.
It expects a pan_display() to un-stage it out of mixer.
Return fail at overlay_set() if pipe was still stage
at mixer.
CRs-fixed: 399193, 393979
Change-Id: I562f6e133bb239b30f4f53669dbf1cc5ddf80d02
Signed-off-by: Kuogee Hsieh <khsieh@codeaurora.org>
Signed-off-by: Siddhartha Agrawal <agrawals@codeaurora.org>
There has VG1 pipe commit (pan display) happen after system
suspended. This left VG1 still staged up at mdp mixer. Once timing
generator is enabled at resume, VG1 pipe start fetching contents from
address 0 since VG1 has not yet be configured. This cause page fault.
This patch has sanity check at system suspend to make sure no any pipe
stage up at mixer after suspend.
Change-Id: Idcf974ceb4afe2a3ec55b9603b700fa497f84045
Signed-off-by: Kuogee Hsieh <khsieh@codeaurora.org>
Signed-off-by: Siddhartha Agrawal <agrawals@codeaurora.org>
For the panels that have low v_back_porch, if h/w FIR scaling is used,
during vbp time, mdp clk should be fast enough to output a line from 4
input lines. MDP rate equation for very small scaling, e.g. 1 or 2
pixels' upscaling or downscaling cannot cover this case, where
underruns are seen on those panels.
Change-Id: I4f35f98c2c1bc4ef04dfee193427bd3ff674945d
Signed-off-by: Huaibin Yang <huaibiny@codeaurora.org>
Signed-off-by: Siddhartha Agrawal <agrawals@codeaurora.org>
MDP4.1 blend operation registers are not double buffered and
take effect as soon as they are configured. Configuring these
registers at any place other than between dma and vsync produce
flickers as new blend values would get applied to previous
mixer configurations. Configure blend operation registers just
after dma is over, before vsync.
Change-Id: I377c11222f7a0cd77e98e90edec6e2e1dc0c17ca
Signed-off-by: Pradeep Jilagam <pjilagam@codeaurora.org>
Signed-off-by: Siddhartha Agrawal <agrawals@codeaurora.org>
Update LPA platform driver to register restart callback.
The implementation of the callback is to issue a pending buffer
written by the application to restart the session when the dequeue
process is stopped due to underrun issue.
The callback is triggered from ALSA core when the framework
detects that the renderer stopped pulling data but the application
is still writing data. It runs in atomic context.
Fixes:
-A disturbance was heard when switching from one song
to the other, or when the song is paused for greater
than 3 seconds and then resumed
-This was due to the previous value of the track
volume being used in the lpa driver
-This was fixed by setting 0 as the initial volume
Change-Id: I035760937d032038fb3f3383dc87ecbdc5f4700d
Signed-off-by: Subhash Chandra Bose Naripeddy <snariped@codeaurora.org>
If actual_freq of gpu is not updated when a gpu floor
is set, TZ is unaware of the gpu frequency change and
computations are based on an incorrect value. By setting
actual_freq, TZ is notified of the new gpu frequency at
the next idle exit.
Change-Id: Ifc69996ef309ed4f8a5d46a2048757e57dd1a8ec
Signed-off-by: Steve Muckle <smuckle@codeaurora.org>
(cherry picked from commit 81599d50a0d122c52c966279640d6d8c64def656)
The active and leakage energy offsets for each frequency are
best left configurable from userspace to make tuning easier.
Change-Id: I435a30d46cc02861dd7e8371b21d0433c0aa6a28
Signed-off-by: Steve Muckle <smuckle@codeaurora.org>
(cherry picked from commit 8104d6dde814e8dbb4f91a3e37a19627e7512f50)
It is desirable for performance reasons to be able to run dcvs
with different algorithm parameters depending on the number of
CPUs that are online. The algorithm parameters are already replicated
per-CPU, but all CPUs operate in DCVS with the same parameters at
any given time.
These per-CPU parameters now correspond to the total number of CPUs
online. For example, if 2 CPUs are online, the algorithm parameters
for CPU2 are used.
Change-Id: If308a2fa949ac669823e759e0fd8e2cdbf6e4c03
Signed-off-by: Steve Muckle <smuckle@codeaurora.org>
(cherry picked from commit c48381e2336125410549d7df1425dc8009c0c495)
Performance is enhanced if the GPU frequency is floored at its
maximum nominal frequency when multiple CPUs are online.
Change-Id: Ib6bfd5007d660064844876b06f552f4d8c84865c
Signed-off-by: Steve Muckle <smuckle@codeaurora.org>
(cherry picked from commit 749f301c94312d2ec827c67cecb858e02383c8ab)
Once a gpu calls stop_sink and is no longer participating in dcvs, we
should not call set_floor_frequency callbacks for that gpu.
Change-Id: I3cde82dc9975bcb37f065ea7ab8eb88a8f7fc933
Signed-off-by: Steve Muckle <smuckle@codeaurora.org>
(cherry picked from commit 77c66a3c6c27729aa0594b2f1b140aaf8f556b67)
If there is a pending frequency update when a core stops
acting as a dcvs sink, it should just be dropped, rather
than trying to honor that last frequency request.
Change-Id: Iac30cc7e06a8a70eecc4da712fdf160b788a7c2c
Signed-off-by: Steve Muckle <smuckle@codeaurora.org>
(cherry picked from commit 016af00bf66bb267cab573131598edbf83204f3f)
Temperature updates should not be sent continuously just
because a core has registered with dcvs. Instead, start
and stop the updates when the core starts and stops as a
dcvs frequency sink.
Change-Id: If7721f523eb44026c421dd7ec4fa3975bc65cd09
Signed-off-by: Steve Muckle <smuckle@codeaurora.org>
(cherry picked from commit 4eb5d7cf22bbea963251ff70a7b4e28a2d883b77)
To avoid spending a lot of time at once in the cpu hotremove
path, do not perform multiple hotremoves back to back.
Change-Id: I78a643f73718e4e08786193c71bbe2237aa790d2
Signed-off-by: Steve Muckle <smuckle@codeaurora.org>
(cherry picked from commit 9c0aa035f7aeac1b1039125bf27d51d11861fa03)
System performance is enhanced if the gpu frequency is given a
minimum corresponding to various frequency levels of CPU 0.
Change-Id: Iba168d708524fc8ef164428bb5f4e0631a499342
Signed-off-by: Steve Muckle <smuckle@codeaurora.org>
(cherry picked from commit 682c7a01c1d86518cdc7bec25cb413498811137b)
Target reset happens when trying to do a ion_unmap_iommu
on the above fd, which was never mapped. Added a check for
non-zero virtual address.
Change-Id: I9a4d81eea6ee0cdbe3e8bbcb0c1d05c005680555
CRs-Fixed: 394779
Signed-off-by: Srinu Gorle <sgorle@codeaurora.org>
Signed-off-by: Neha Pandey <nehap@codeaurora.org>
DCVS only expects a core to be registered once and kgsl reregisters
the core every time the policy changes. Kgsl should only do the
sink start and stop every time and only do the register the first time.
Change-Id: Id54f078d6013586899bf85fc2462e6c473ffc6b5
Signed-off-by: Suman Tatiraju <sumant@codeaurora.org>
(cherry picked from commit 229d24c088699c5f7a3591e5335dcc1668e5e913)
CPU frequencies can differ between different revisions, so create
the table of cpu frequencies dynamically based on data from
acpuclock rather than using a fixed table.
Some of the data in the table comes from sync points that will be
implemented between CPU and GPU frequencies. The sync points are
defined here, but the sync implementation itself will come in a
subsequent commit.
Change-Id: I24cf17b199df1e5d064c1894b269e49118b39ac7
Signed-off-by: Steve Muckle <smuckle@codeaurora.org>
(cherry picked from commit f9a8749b17961be653e9cbb426b1b72cada7f61c)
It is not necessary to run these threads at a realtime
priority level.
Change-Id: I8c6492f22e803811db5757c51beeeb81f93f32b6
Signed-off-by: Steve Muckle <smuckle@codeaurora.org>
(cherry picked from commit 8862f41f1c632ba84f0a21e8045d70278fd67fd3)
It is useful to be able to toggle at runtime whether
particular DCVS points are used as transient levels. This
adds a sysfs node per core which when read returns a list
of the currently enabled DCVS transient levels. Writing
the frequency of a DCVS transient level toggles whether it
is enabled or not.
Change-Id: I69ebb6974e97efa832798047259b9acdfd08aa7c
Signed-off-by: Steve Muckle <smuckle@codeaurora.org>
(cherry picked from commit 2f6db34b3216695d4f624d2204d5e1356e62c3d5)
This patch ensures that camera is recovered by propogating the
error event when sensor is pulled off.
Change-Id: I4147e02342c2538db8337d3e04735cf97b2d7635
Signed-off-by: Azam Sadiq Pasha Kapatrala Syed <akapatra@codeaurora.org>
Set the defualt IOMMU count to two for the GPU.
If the device is 8960 (ie not 8960PRO), set the IOMMU
count to one and let kgsl take care of initializing only
one IOMMU device.
Change-Id: I736a6d6744c4359ec5cc923d6eddd652451c81a1
Signed-off-by: Carter Cooper <ccooper@codeaurora.org>
Signed-off-by: Gopal Goberu <ggober@codeaurora.org>
The graphics 3d ports need to be separately halted/unhalted.
Facilitate this by mapping to separate external IDs.
Change-Id: I88221ba574267ffcc42d1b30df3c77647df3df8f
Signed-off-by: Gagan Mac <gmac@codeaurora.org>
Signed-off-by: Neha Pandey <nehap@codeaurora.org>
CONFIG_MSM_WFD needs to be set to build wfd driver.
Change-Id: I9d3ee99998fe284bfaad59dc15f44a295fe9f0e4
Signed-off-by: Arun Menon <menon@codeaurora.org>
(cherry picked from commit dbea05705f5ac5fe266f3cf75cc839e53bbb67fa)
To make sure for each writeback play the reg is configured and avoid
mdp hang.
Change-Id: I29bdc31f27accca84e7add126c1c1e3c8a78fa15
Signed-off-by: Huaibin Yang <huaibiny@codeaurora.org>
Signed-off-by: Sudhir Sharma <sudsha@codeaurora.org>
(cherry picked from commit 36ca4e992dc5c75a2dd709969db850aa02e7c6e7)
Add the logic for wfd writeback interface. It already presents on
other display interfaces.
Change-Id: I389be77ec18041e260d0e71940586e86f1841ff8
Signed-off-by: Huaibin Yang <huaibiny@codeaurora.org>
Signed-off-by: Sudhir Sharma <sudsha@codeaurora.org>
(cherry picked from commit 3df55288659cfa826e9ad89cb38a8b722b2ae20f)
pm8917 dsi regualators missing the dsi pll client which is causing
the clock warnings while system suspend
Change-Id: I9ffa310df81b66d3adf8c272666c4d3d9f933103
Signed-off-by: Nagamalleswararao Ganji <nganji@codeaurora.org>
(cherry picked from commit c2e5752d280d1ab8fb3efe341fcb3a56c7bd1a65)
(cherry picked from commit 30f86aa5c694215b89965b633330af4459f1c4e3)
MSM8930 with PMIC8917 does not support HDMI. This change
ensures that HDMI clocks are not set/reset as part of the
MDP GDHS sequence for this particular cofiguration.
Change-Id: I020a87b5c96df3c75b47aa13b65da0f03eb60b00
Signed-off-by: Aravind Venkateswaran <aravindh@codeaurora.org>
(cherry picked from commit 67d033439cd3d632a062b76bb6e74a5819c99851)
(cherry picked from commit d49ea2e1924bde3d67e8bb9195cc81c88a119d69)
This change handles panel updates for WFD panel via
overlay_commit interface, along with conglomeration of
some common code across pan_update and overlay_commit ioctls
Signed-off-by: Kalyan Thota <kalyant@codeaurora.org>
Conflicts:
drivers/video/msm/mdp4_overlay.c
drivers/video/msm/msm_fb.c
include/linux/msm_mdp.h
Change-Id: I9e332856782c59ab598bb388a2ec482076746ad2
Signed-off-by: Sudhir Sharma <sudsha@codeaurora.org>
Overlay_play() adds a pipe into pending queue and pan_display()
will commit those pipes to hardware and empty queue. This patch
will make sure queue is empty at suspend so that no unexpected
pipes will be commited to hardware by pan_display() at resume.
Otherwise, iommu page fault may happen.
Change-Id: Iafdf469c6cdbf5d469c9dee114555a8d1adb9c66
Signed-off-by: Kuogee Hsieh <khsieh@codeaurora.org>
Conflicts:
drivers/video/msm/mdp4_overlay_dsi_cmd.c
Signed-off-by: Sudhir Sharma <sudsha@codeaurora.org>
To improve performance, hardware vsync event at mdp driver
is passed to framework so that both composition and frame
update are aligned at vsync event. This patch will upgrade
wfd to incorporate vsync driven frame push in consistence
with other interfaces.
Change-Id: If088826ec387446301f1f6acc311d909edb04163
Signed-off-by: Kuogee Hsieh <khsieh@codeaurora.org>
(cherry picked from commit d74db5fcf24a223570137087aa5632593b315fcc)
Conflicts:
drivers/video/msm/mdp4_overlay.c
drivers/video/msm/mdp4_overlay_writeback.c
Signed-off-by: Sudhir Sharma <sudsha@codeaurora.org>
